Search results

  1. Y

    GOT MY CAR WEIGHED!

    You got my car beat, mine weighs 3450 lbs without me in it, and with a 1/4 tank of gas. Reason number two why my car doesn't see much track time.
  2. Y

    Need Help Immediately.........

    Lastnight at work I was leaving and I put the key in the ignition and I got nothing.....except for the blinking red "theft" light. I was sitting there messing around with it for about two hours, and finally the battery went dead. I need to know what the hell is going on here. It goes into...
  3. Y

    Cooper Zeon 2X5 + Stang and Snow

    About three of four dead bodies work wonders......Or you could use 5 bags of softener salt, either way the more weight you have to better. Of course staying off the "fun" pedal helps too.
  4. Y

    Power Wire through Firewall

    There will be a huge rubber grommet to the left of the steering shaft. As stated above, simply cut an "X" or "+" in this with a razor blade, and run the wire through it. Just make sure you go from the inside of the car out, because it will not work the opposite way.
  5. Y

    Box Designs... 3 10's

    What kind of car is this going into? I just got done building a 2.5 cubic foot ported box for my 2000 Vert. Let me know what the subs require and the model car and I could be of some assistance.
  6. Y

    Need Immediate Help.....

    Friday night I was coming back from my girlfriends workplace and I heard what sounded like a shotgun blast. Well I looked back and didn't see anything, but knew something hit my rear window. Well today I was on my way to work and I keep hearing this creeking noise, and sure as ****, my rear...
  7. Y

    Best Lowering Springs???

    I just installed my FRPP C springs two days ago, and I couldn't be happier with the results. I didn't want the "slammed" look nor did I want to sacrifice too much ride quality. For the price, and the fact that they work with the stock shocks/struts, they are hard to beat. I got mine from GEF...
  8. Y

    Mach460 Thread #100000000

    It's actually not hard to do man. The little black box with all the speaker wires: white, white/black, grey, grey/black, purple, purple/black, green, green/black, you need to cut the end off of it and strip the covering off the wire. Next get a pair of cheap RCAs and cut them at the ends and...
  9. Y

    Ignition Questions...

    My car has developed a new and aggravating occurance. Whenever I put the key in the ignition the car will sit there and crank, but will not fire. When this occurs the red "Theft" light comes on. What in the hell is the problem, and what the hell can I do to fix the problem? Gonna need some...
  10. Y

    Spring Question for Convertibles...

    Wow, not only was that not helpfull at all, but you interjected more companies. I am glad you blessed my thread with your brilliance. I guess anything for an extra post count. Can someone please be of more assistance since I am ordering them within the next two days?
  11. Y

    Spring Question for Convertibles...

    I have already decided that I want FRPP springs, but will the C springs fit convertibles. I have checked around and they don't exclude convertibles, but I see that they make the G springs specific for them. Any help would be greatly appreciated!
  12. Y

    GAS Mileage/ Power Lose - O2 Sensor??

    Get the codes pulled, and then ask a Ford Tech what they mean. It could be more than just an O2 sensor, cause I just took mine it and they ended up replacing the rear O2 sensor and the MAF. The other way to go is just get some MIL's and hope they work.
  13. Y

    How to!?!?

    All you need to do is get a flathead screwdriver to pry out the top portion where the little indentation is located. There is also a metal clip where is starts to flatten out. I had mine fall off on my car and just used some JB Weld to hold it to the plastic. Easy fix.
  14. Y

    What does and engine misfire sound like? need help

    The lack of acceleration when you step on the gas was the giveaway symptom of a misfire. I had the same thing happen to me, and what caused it was dirt and all sorts of debris in the actual plug boot, where the little metal coil is located. I just cleaned those out real well and no problems...
  15. Y

    Flowtech longtubes with matching X pipe

    I've had this combo for about 4 months now, and they are fantastic for the price. Quality was better than expected, and fit was great except for the EGR placement. Sounds like a race car at WOT, and really quiet at idle. They are, in fact, the same "design" as the Hookers, just different...
  16. Y

    Full length headers CHEAP , ceramic coated for $347 bucks , same design as Hookers

    I have these headers and matching x pipe, and I was shocked with the quality. They are very nice headers for the money, and the fit was good with the exception of the EGR. As stated before tubing thickness is different then the Hookers, but they are the same design. I went from stock...
  17. Y

    Car is Missing?

    Had a very similar thing happen with my last plug change. The scariest part was having the throttle wide open and not accelerating at all. I removed all the boots and there was a ton of debris and all sorts of junk in and on the coils themselves. Might want to try to pull them out again...
  18. Y

    Hesitation at Speed....

    Alright so about 6 months ago I changed my plugs from the factory plantinum plugs to the copper plugs. Lastnight I changed them, again with copper plugs. I got in the car this morning to get some food and the car has a nasty hesitation/jerking upon takeoff and at speed. I mean it feels like I...
  19. Y

    Gas ?

    I have to run 92 octane because of the superchip, and I will occasionally throw in a gallon or two of 110 racing fuel to clean out the injectors. Believe it or not there is alittle difference in MPG when I add the 110 octane. If you are mostly stock and are running the stock computer then run...
  20. Y

    Racing Fuel

    Thanks for the replies guys, but do I really need to worry about my O2 sensors that much? I am running an Off-Road X and I have the MILs on the back, what exactly would ruining them hurt given my setup? I was told that it would be okay to run a gallon of it per tank and my tune requires me to...
Top Bottom
Back
Forums
Menu