Search results

  1. J

    Anyone running a 351w and Vic Jr intake???

    I run a super Vic Jr on my 426W and it is not even close. Check my pics and see here, http://www.cardomain.com/ride/958894 But I am not sure how much taller it is than a regular vic jr manifold.
  2. J

    painless wiring

    I used EZ Wiring in mine and it works great, 1/3 the price compared to painless.
  3. J

    C-4 problem, PLEASE Help!!!

    You are right, it looks like I am going to have to do this again. Thank you for all of your help folks, lets hope this time I get it right. Or I may start crying like a schoolgirl :D
  4. J

    C-4 problem, PLEASE Help!!!

    Is this possible without pulling the tranny again? You can only see so much with the inspection plate off? I never pulled the pan, but maybe I need to now. If something in there got messed up somehow.
  5. J

    C-4 problem, PLEASE Help!!!

    Well, everything on it worked fine before all of this happened, so i think that the bands are ok,(I only pulled the tranny to get it out of my way) I was very carefull putting it back in to not let the TC slip back off of the pump. The park mech still works, When the car is in park it does...
  6. J

    C-4 problem, PLEASE Help!!!

    Well I'm back and still not ok yet. I pulled the tranny, properly indexed the TC and checked the splines on the input shaft and pump, all ok, I put it all back together and still do not get into gear. It sure seems to me that there could be a pressure problem or too much air in the tranny...
  7. J

    Shroud for griffin rads?

    I could use one too...
  8. J

    '05 wheels on '70 fastback

    Gotta agree on that one as well!
  9. J

    need advice on good sound system

    I have run a bazooka bass tube in my trunk, with an amp and it is plenty loud for all the neighbors to hear...
  10. J

    Show me your 69 cars

    Steve69, It looks like you stole my car for a minute there! Check it out here... http://www.cardomain.com/ride/958894
  11. J

    Carb Spacer and RPMMMMMS

    7000 rpms sounds a bit high to me.
  12. J

    Progress on my 69 Coupe (56k Warning)

    man thats a lot of work ahead of you. What motor do you plan on using?
  13. J

    351W experts in here please lol

    Go with AFR 205's you will be happy you did. Keep your internals forged as mentioned and run a main support to keep it all together. Good luck
  14. J

    C-4 problem, PLEASE Help!!!

    Glad to hear I'm not the only one who has done this... :) So if I back off the bolts to the T/C, is there any hope of getting it lined up or have I probably ruined the splines on the T/C or input shaft? There are no funny noises, however I only have the headers installed so it is very hard...
  15. J

    C-4 problem, PLEASE Help!!!

    Well, here is what I did. I had the motor on the hoist and I bolted the T/C to the flywheel first, then I grabbed the tranny and slid it into the T/C and twisted it by hand until it slid into place. I then bolted the bellhousing to the motor. sounds like I screwed this up. Is this...
  16. J

    C-4 problem, PLEASE Help!!!

    I'm afraid I don't know what this means. I mounted the motor and tranny all together outside of the car, it seemed to go in nice and smooth. Can you explain the indexing part and how to do it? I guess I could have done something on that end... The t/c is not new, same one I have been...
  17. J

    C-4 problem, PLEASE Help!!!

    The valvebody has not been touched. I took the tail housing off to get the old speedo gear out of there, it fell off removing the speedo cable. I have crawled under the car and shifted manually, and it does click through the gears, but obviously it is not actually moving through the gears. In...
  18. J

    C-4 problem, PLEASE Help!!!

    Thanks for the replies, however, I had it on the ground in the first place and it went nowhere! Thats why I lifted it and found the current problems. I think I agree with the above post that it is stuck in neutral or something, also the speedo cable and gear and spedomoter are all brand...
  19. J

    C-4 problem, PLEASE Help!!!

    Thanks, but this is behind a 426W stroker motor. If I need a new trans I will go with PA or someone. Just don't want to do that unless I have no choice.
  20. J

    C-4 problem, PLEASE Help!!!

    Will do thanks, I know the fluid level is good (I just filled it with new stuff) but I have not run the motor very long yet so the warmup thing could be part of it for sure. Thanks again
Top Bottom
Back
Forums
Menu