Search results

  1. vladasap

    For a self-tuner...

    i think turbo will be harder i have a mild HCI combo and no tune n the car ran pretty well ( lol - i say ran because its in the shop due to a misfire i cant locate ) but minor tweeking with timing and fuel pressure will go a long way on an HCI car imo....
  2. vladasap

    NEED ANSWER QUICK

    so he never figured it out??!! :eek: wow i really, and i mean REALLY hope this is not another one of those :shrug:
  3. vladasap

    NEED ANSWER QUICK

    the car is actually at a local performance shop and they will run all test and get to it in the morning. Im very ill equiped so i couldnt run these tests and get to it myself. I will post as soon as i speak to them and see what they come up with. Thanks guys !!!
  4. vladasap

    NEED ANSWER QUICK

    ill try to reach a couple of my buddies to see if anyone has one laying around or if i can just use theirs to see if it works... ill keep you guys posted. but no one is suspecting the dizzee? (thats mainly what im afraid of - they are pretty pricey!!!)
  5. vladasap

    NEED ANSWER QUICK

    i have no idea as for the grounds but i really dont see a reason for them to all of a sudden go out of whack and cause such a major misfire... the coil is about 2-2.5 years old could the coil be causing such a misfire? it doesnt feel like a single plug is down it feels as if half the cyls...
  6. vladasap

    NEED ANSWER QUICK

    nope..the dizzee is in right - spout facing cyl 1 at tdc this misfire developed before i started the work on the car. The car ran fine for months and then the lifter started making noise and soon after -couple miles later- the misfire began with the car reassembled and new plugs wires...
  7. vladasap

    NEED ANSWER QUICK

    no....thats been checked over and over...and they are all marked to prevent things like that from happening... im getting really frustrated.....
  8. vladasap

    NEED ANSWER QUICK

    i just installed new lifters, rockers and p.rods. I heard a lifter making lots of noise and the car had a very noticable misfire, so i decided to refresh the valve train, in the process i changed the spark plugs. The car is still misfiring really wildly. :bang::bang::bang: I had a buddy...
  9. vladasap

    Flushing the coolant, weird color coming out

    i just drained my coolant last night and i was just about to post about this... i have IDENTICAL issues so just a good flush will do the trick? (in my case coolant was replaced just 2-3 months ago when i re-installed the radiator)
  10. vladasap

    help my car misses unless under a load

    i'd get under the car make sure you plugged everything up correctly under the car when you were doing the tranny (especially the 02's) if not id really look into the wires and plugs (my car used to foul plugs and miss because i had oil rushing down into the combustion chamber due to a bad pcv...
  11. vladasap

    Mishimoto Radiator user feedback

    well i do have a ST Brace but no subs. I'll weld in a set and then call Mishimoto AGAIN and pop the new one in and see what happens......
  12. vladasap

    Anyone using an electric water pump??

    no personal experience but i've heard a lot of good stuff about the meizere and the price is pretty fair
  13. vladasap

    Mishimoto Radiator user feedback

    ...any suggestions on a GOOD & RELIABLE radiator for our cars? cooling is really not something i wanna mess with and keep re-installing faulty parts, i wanna know that everything is up to par and functioning properly im debating going back to a stock replacement rad. Any feedback on those?
  14. vladasap

    smog pump delet pulley question

    slightly off topic but... on the passenger side on the firewall where the two AC lines go into the firewall i have some greenish (coolant looking fluid) slowly slowly leaking out of where the 2 lines went into is that actually coolant? how should i plug those up or can i leave them open as i...
  15. vladasap

    help my car misses unless under a load

    u have the T5 listed in your sig and my buddies car used to do that after a tranny swap...he replaced the ecu with the same exact one (matching part numbers) and it stopped - no idea why but it helped this probably doesnt help any but...
  16. vladasap

    Question about the 2 Lines from upper intake to pcv valve

    i only have one on my EDL RPM so i think you'll be fine
  17. vladasap

    Mishimoto Radiator user feedback

    just earlier today i noticed that my replacement mishimoto is leaking...i put about 600 miles on this one and the previous one i had for about 1500 miles i dont think i'll be taking them upon their warranty again...i want my $$$ back:notnice:
  18. vladasap

    Help Please Pump Question

    im pretty sure its LPH....
  19. vladasap

    A/C removal with A/C delete pulley, A/C Condenser and line questions

    dont spend money on a delete pulley. simply run a shorter belt and run it straight from the PS pump to the WP
  20. vladasap

    Help Please Pump Question

    a 255 walbro is really not pricey:shrug:
Top Bottom
Back
Forums
Menu