Search results

  1. M

    351 W, how much power?

    LoL, no the heads are gonna be TFS TW heads, and it will be a DSS short block. I was just wondering what a level 10 block should be able to support. I was hoping to see about 540 rwhp. thanks Sean
  2. M

    351 W, how much power?

    I am planning on putting a 357 W in my stang after the end of the year and I was wondering how much HP the block will hold SAFELY. I have a vortech S trim, (I know its a little small) but I was wanting to see about 530 rwhp. Is this feasable, or just dumb?
  3. M

    Need Help Asap Car Dies On My While Driving

    Coil possibly, or bad connection to the coil could do that. It has happened several times to my stang
  4. M

    Car wont fire

    I left my car for 3 weeks and came back and it wont fire! Any ideas of what it could be? Its been kinda rainy/snowy here and I figured it would either be the coil, or something got wet maybe? Thanks Sean
  5. M

    PMS question and Heater core question

    ttt
  6. M

    is it ok if throwout bearing is bad

    I would replace it if I was you. Mine chirped for a while, then all of a sudden after a high speed pass it exploded, took out about 3 teeth out of the PP and part of the damn bell housing blew out too. I was lucky, I just had to push start my car and drive it 45 mins home and had to shut it...
  7. M

    PMS question and Heater core question

    ok fellas, here is the new development with my PMS issue. The left bank is STILL going lean at around 4500 after replacing the 02 sensors. I tried to add fuel and it still happens, any ideas, maybe the PMS is just broken? Also, I think my heater core just happened to crap out on me. Fogs up...
  8. M

    Snapped Rear Sway bar?

    Two days ago I snapped my rear sway bar, has this happened to anyone else? I know they are kinda wimpy, but I wouldnt think that would snap when launching on street tires. Maybe it was just worn out. I didn't hit anything either, no speed bumps etc. Thanks Sean
  9. M

    ILLINOIS WHO?

    Yeah, I work on my car, don't trust anyone else to work on it, I am living in Carbondale IL
  10. M

    Left bank going lean when plugged up to PMS

    also, how hard is the PMS to tune with WB 02 sensors?
  11. M

    Left bank going lean when plugged up to PMS

    I am not using Stand Alone due to the fact that I wont be pusing it above 6000 rpm at the moment, but the new motor should push 7000 :hail2: but anyhow, how much to WB o2 sensors help compared to the stockers?
  12. M

    Left bank going lean when plugged up to PMS

    LoL, yes I am still using the old o2 sensors, my fuel table at WOT is -2%, thats what they recommended before, BUT I tried adding more fuel and it still didnt work, any ideas of where to get good o2 sensors?
  13. M

    Left bank going lean when plugged up to PMS

    Well fellas, I found out why my car is surging at 4500 rpm when the PMS is plugged up, it appears that the left bank is going lean. I tried to add more fuel to the extent that the injectors were not all the way maxed out but I think this dilema is rather odd. When the PMS isnt plugged in it...
  14. M

    TPS set, car idles right now, as for the PMS now!

    ok, here is the new problem. I put in all the settings that they gave me, but I run REALLY lean on the left bank at about 4500, and by lean I mean like 30 and less on the PMS scale, any idea what would cause that, mebbe a bad o2 sensor?
  15. M

    intake/head combos

    where can you get heads for $960 at summit? is that just the castings? Sorry for the hijack
  16. M

    TPS set, car idles right now, as for the PMS now!

    Wow, nice interior, mine is stock as it comes cept for my white face guages and short throw. Ok, as far as the idle settings go, do you set the idle timing setting at 10* or do you set that manually w/ the distributor? That may have made my car run stupid also. Thanks Sean
  17. M

    TPS set, car idles right now, as for the PMS now!

    ok fellas, my tps is set to .98 volts, this is right on the money cause I used a military spec volt meter, and it started to actually idle half way decent :D but anyhow, with the things I have listed, what is a good setup for my stang on the PMS? I know they are all different, but I need a...
  18. M

    Need Advice w/ PMS

    looks like this guy is having the exact same problem I am having cept he has heads. http://www.stangtuning.com/showthread.php?t=1266 also, it wont let me post there for some reason :(
  19. M

    Need Advice w/ PMS

    Yeah, I called up there to ask what the deal was a while ago, and rick couldnt tell me a whole lot. Not that he doesnt know his stuff, it is just that it is a strange problem and we tried alot of stuff, but didnt try adjusting the TPS :rolleyes: . I REALLY hope that it works, I am in the...
  20. M

    Need Advice w/ PMS

    Do you think if it is out of wack it could make the PMS run retarded? It runs good w/o it, just curious
Top Bottom
Back
Forums
Menu