Search results

  1. F

    Post Pics Of Yourself

    Here's a couple of me and one of the gf:
  2. F

    Gasket Question

    Ight thanks guys i found it. I was just missing a 3. I don't like the graphite gaskets in my car right now because i'm going to be spraying it over xmas and i want the softer material Felpro gaskets since they're better for power adders.
  3. F

    Gasket Question

    Does anyone know where i can get a set of Felpro gaskets, part # 933PT1? I looked at summit, but they don't appear to have them. Any help would be appreciated. thanks
  4. F

    Post pics of black cars

    Caldwell, your car is the ****zy.
  5. F

    Lowering springs

    Eibach Sportlines: Very old pic, but it works
  6. F

    If I drain the anti-freeze and it is below freezing, will the block crack?

    When you rebuild, its a known fact to run non-synthetic oil. When its nice and thick it will pick up any debree and send it to the oil filter. Its not NECESSARY, but its smart. When i redid my motor (heads, port work, cam, etc) i used non-synthetic and then 800 miles later i changed the oil back...
  7. F

    MSD 6AL Ignition, Anyone have it??

    Its really not going to be a noticeable difference unless he replaced a bunch of other ignition components on the car at once that may have been corroded. That was the case with me and my car ended up pulling much harder up top because of it. The 6AL doesnt really add power, it more utilizes the...
  8. F

    Blank Canvas, 95 Gt vert (lots of questions)

    The dogbone is a weight attached to the bottom of your rearend carrier housing. You can actually see it if you duck down under the back of the car. All it requires is a ratchet set to get the two bolts that hold it on. Thing was like 12 pounds if i remember correctly. I don't know exactly where...
  9. F

    Need pics... red SN95 w/ black bullits?

    Here is a 94' Rio red cobra with black deep dish bullets. Scroll way down for daytime pics: http://www.svtperformance.com/forums/showthread.php?t=233905
  10. F

    Lopey cam idle

    I've heard a TFS stage 1 in person and it sounds a bit rougher than my E cam. It really does sound nice. His was even turned up to 900rpm and my E cam is at 800.
  11. F

    Nice looking motor

    wow. Screw that. I wish i could throw on a pair of STOCK tricflow out of the box heads, paint the block and sell it for $3400. "These are trickflow heads with AFTERMARKET springs." woohooo. "up to 420hp depending on intake and headers." Are they seroius? Unless these are some fully worked TFS-R...
  12. F

    Dyno Numbers In!!!!

    wow stock rear end and a 2.5 inch catback? Shouldn't you be running at least a 3 inch? And that thing with 4:30's!!!!!! DAYM. That thing must RIP through the gears. Hope you're planning on building the rear before you shoot for low 10's.
  13. F

    Blank Canvas, 95 Gt vert (lots of questions)

    The Biggest restrictions on a stock vert are: Intake manifold stock gearing (get a stall, 4:10's, and shiftkit in there asap. For reference my friends AODE 95 GTS coupe picked up 0.5 seconds in the 1/4 going from stock 2:73's to only 3:55's!!) stock midpipe with its FOUR cats...
  14. F

    my H/C/I parts list. what am i missing?

    I agree with RIO 5.0 on the gasket set. I looked at summit and tried buying gaskets seperatley since i didn't need every single one that came in the kit but when you buy head gaskets($65), intake gaskets($30), and timing cover gaskets ($20), it adds up to more than you'd pay for the FRPP gasket...
  15. F

    Nitrous

    Im not 100% sure on what came with the Trickflow kit, but i think it had pretty much everything you need: pushrods, lifters, valvesprings (pretty sure the heads come complete.) With a combo like that, 24# injectors are sufficient but since you are planning on running nitrous through it, i'd go...
  16. F

    Whew!! Got some heads! Have some Q's

    The 2031 cam is a great grind and is very AODE friendly. Its designed for GT40 heads with 1.7RR so that would be my combo. I think it was like 513/517 lift. Dont remember the exact specs with that setup. Check the sticky on it at the top of this forum. Another cam you could consider is the...
  17. F

    275's on a factory rim??

    Some tires are narrower than others but 95% of 275 tires will fit no problem on stock 8 inch rims. The Nitto 555DR's in 275 form fit very well because they are a narrower tire than most.
  18. F

    Nitrous

    my b. Yes i dunno what happened there. For reference i am running 10* timing on my 100 shot.
  19. F

    For all of you handling suspension gurus..

    The guys above me have covered most of the bases except one. Since you autox/road race, you are going to want a very high spring rate or you will be scraping your fenders with your tires. This is what my car is doing when i run it hard through the turns and i am switching springs this christmas...
  20. F

    Nitrous

    not necessarily. Alot of it depends on the maintainance of the car. There are 94/95 stangs with over 450K miles on them and still running strong but obviously there will be a few things you will need to check up on. A car with that many miles will have worn parts like valvesprings, lifters, etc...
Top Bottom
Back
Forums
Menu