Search results

  1. 1

    AOD with B-cam

    nobody??
  2. 1

    Spark Plug Gap Question

    Think i may have figured out some of my fuel problems took it back to my machinist shop today and we ran a few pulls with diffrent fuels and once i got up to 101 octane in the car the spark knock disappeared through the mid rpm range and produced a tad bit more HP....So basically i can run 93...
  3. 1

    the OFFICIAL "crazy idle" thread

    "Crazy Idle" Intake Swap Car:89 Mustang GT Upgraded stock Intake to a new Cobra Intake,I installed the cobra Intake made sure to hook all the sensors and what vacum lines i had back up to new intake for the most part they hooked up alike...but when i tried to start the car it would not idle at...
  4. 1

    Rattling sound at high RPM, can't figure it out.

    Maybe exhaust rattling against the bottom of your car?? my buddys used to do that drove me nuts everytime i rode in it,I finally adjusted his exhaust for him one day when he stopped by before we went cruisin.And that cured it.
  5. 1

    idle way to high

    Well it could be a few diffrent things....could be the IAC since it idles down when you unplug it,Check your Air filter could be Dirty and clogged,Also check the inside of your MAF sensor make sure no large pieces of debree are hung up on the screen or blocking air from flowing past the...
  6. 1

    AOD with B-cam

    Is anybody running a B-cam with an automatic? I have a buddy that wanting to run a B-cam and he has a Beefed up AOD with a 3500 stall that he just installed and he changing cams and intakes in his mild 302.
  7. 1

    How much oil does your stang use?

    My cars also uses about a quart or a little less between oil changes,but i pulled my intake a few days ago and found oil in the intake appeared to be a bad pcv valve but i see you guys are saying Gt-40 and cobra intakes are bad about sucking oil through PCV valve is there a way to fix that??
  8. 1

    Spark Plug Gap Question

    I only go to run this motor once before the season end...Ran a 13.07@106mph
  9. 1

    B303 and cobra rockers

    Yeah swamp is right i dunno where i came up with .526 /.526 been playing with to many cams lately
  10. 1

    major problems with idle!

    Sounds alot like a vacuum leak on the intake have you had your upper intake off lately?check all your lines going to the intake a make sure every if you have any vacuum caps on your intake make sure none are missing or leaking.
  11. 1

    B303 and cobra rockers

    B-cam on 1.72 cobra roller rockers:226/226 duration .526/.526 lift.have your heads ever been milled?has your block ever been decked?need more info about the motor....Tolerances are very close on a stock 302
  12. 1

    Engine temp?

    Yeah Sounds maybe like a bad stat to me..im having same problem now since im running a elec water pump and elec fan on 3 core rad.....Im gonna start with replacing my stat.
  13. 1

    Spoiler and hood for my 1990 GT?

    yeah theres a few out there to chose from you can check out cervinis,Harwood,mr body kit.....Im running a Harwood 4" latching Cal and it great Harwoods are a little on the high side but the quality is great. check out http://www.mrbodykit.com for some ideas.
  14. 1

    this car really sucks

    Sounds like an Ignition problem to me Do you have any type of after market ignition on the Car or has anything been rewired?
  15. 1

    Spark Plug Gap Question

    Yeah when it was dyno'd it showed Air/fuel mix quality very poor all the way up to 2500rpms which im sure is from the aggressive lopey idle of the b-cam@226, and then the a/f jumps up to 91.4%@3000 and when stomping on it thats when it really seems to come alive you can feel an instant diff when...
  16. 1

    Spark Plug Gap Question

    *Bump* I figured this would be a stumper
  17. 1

    Spark Plug Gap Question

    Iam wondering if with this engine thats in my sig ,should i change my plug gap...i know stock is .054 but with this motor making 329hp@motor and having 10.7:1 compression,the plugs stay bright white.Im running a 155lph fuel pump and 40psi fuel pressure at idle on 93 octane. edit:forgot one...
  18. 1

    Stall Converter Brands?

    AOD transmission? Id say right around 3000
  19. 1

    20HP from this?!? No way-

    Yeah kinda reminds me of one of those as seen on TV type things...Like they really work as advertised.If you want to do something like that your best bet would be to get a custom chip burned for your engine specs.
  20. 1

    Fuel Starvation Problem

    When you changed the fuel pickup in tank did you change the fuel filter?
Top Bottom
Back
Forums
Menu