Search results

  1. gibson89LX

    Stumped

    It's aluminum. I'm using the blue rubber one yes. and all the old spacers came out with the old gasket.
  2. gibson89LX

    Stumped

    I added teflon tape...
  3. gibson89LX

    Stumped

    Ah great, replaced ALL the seals and gaskets on the front end AGAIN and I'm STILL leaking oil!!!
  4. gibson89LX

    Stumped

    the front crank seal comes as a kit with a pan gasket, dust guards, and seal I am finishing replacing ALL the front seals AGAIN today to see it that corks it up finally.
  5. gibson89LX

    Stumped

    Not at idle, no. I read about 60 when I'm goosing it for the first few times. Then it settles down to 30
  6. gibson89LX

    Stumped

    I have a phantom front-side oil leak. the whole front just seems to be wet, which leads me to believe it's being slung from a gear or something. I have replaced the valve cover gasket, the cam seal, crank seal, aux seal, and the front plate gasket and it's still leaking. I'm going through...
  7. gibson89LX

    radiator coolant.. what is it

    indeed :rolleyes:
  8. gibson89LX

    radiator coolant.. what is it

    to answer your question YES, antifreeze is more or less coolant. just mix it with water. read the instructions on the bottle.
  9. gibson89LX

    you guys underestimate these cars

    Don't knock the guy for wanting a 5.0 it's probably more straightforward if you just want a carb'd engine anyway :p And notched, I don't have fun filling up at 18 miles gallon :p
  10. gibson89LX

    JUST CURIOUS

    158k on the body about 70k on the engine :)
  11. gibson89LX

    Good Idea! Or is it?

    it'd be kinda pointless. Theres a reason that people who own twin turbos swap to SINGLE setups mate :D
  12. gibson89LX

    hmmm wtf

    yeah but if you real my original post, It's pretty much brand new! :(
  13. gibson89LX

    hmmm wtf

    well everything in my ignition is sinched down really well with dielectric grease on the connections. Mike, everythings in spec, I haven't checked the fuel pressure though, I may do that when it stops raining here. but the ACT works fine because I'm running non intercooled and it's pulling...
  14. gibson89LX

    hmmm wtf

    Nope, no codes. Yes I still run EGR.
  15. gibson89LX

    hmmm wtf

    nah, because it happens after it's been sitting, not after I've been driving through it
  16. gibson89LX

    hmmm wtf

    Whenever I start the mustang after rain showers when it's like 60* outside it runs and idles fine but when I get up into the boost it misfires. My plugs and wires are less-than-a-month-old motorcrafts. I have also swapped out the TFI, cap, and the coil. I have also replaced the Coolant Temp...
  17. gibson89LX

    i want to stay auto

    Hell mines turbo and I beat the **** out of it and I have yet to break it :p And I STILL contest that I have THE fastest auto 2.3 on stangnet. I need a CT saying that :D
  18. gibson89LX

    FS: turbo mustang in Ohio

    hmmm... Do I REALLLY NEED ANOTHER turbo mustang?? hmmmmm :p
  19. gibson89LX

    How the heck do I get this out?!?

    Ya mean one of these? :p yeah you pop out each vent before you pop out the casing. Be warned the clips will more than likely just snap off.
  20. gibson89LX

    Gas Prices!! and thankful to own a 2.3

    dayum, that's about $4/gal :eek:
Top Bottom
Back
Forums
Menu