Search results

  1. F

    Is my cam going to clear my valves? IM SCARED TO DEATH!!!

    You could always pick up a set of dual springs and some 1.7's, but it should deff clear with your combo.
  2. F

    Some new pics of the rebuild............

    I will take some more pics of the heads when i get back. The gasket kit i bought from summitracing for $90. Its really a great deal. I was only going to get intake gaskets, timing cover gaskets, and head gaskets, but buying them seperately was almost $80 so i went ahead and just got the full...
  3. F

    Some new pics of the rebuild............

    Rear is packed with extra clutches. Pistons have been fly cut to clear the bigger valves.
  4. F

    Some new pics of the rebuild............

    Sup guys. Some of you may recall my motor taking a crap on me and losing compression in the #5 cylinder. There was also oil on that plug so i knew it was something internal. Anyways i pulled it today along with the tranny and while its out i am rebuilding it/modding it. Problem ended up being a...
  5. F

    Had someone ELSE drive my car last night.

    Me and my friends all drive each other's cars. Its cool to see your car driving around in front of you and listening to it etc. Plus its not like im hopping in my friend's taurus lol. My closest friends have 944 turboes, corrado s/c's, S2000's, etc.
  6. F

    What short block?

    Well if your results show a pressure drop, don't throw the block out yet. For examply my friend recently cracked one of his cylinders because he ran high boost through his motor from a blower. Instead of getting a new block, he just got a new cylinder wall welded in place of his old one...
  7. F

    Front suspension help needed

    I vote QA1's. They are a great drag strut and not as hardcore as the lakewoods. That might be a good thing for a daily. I don't know much about cutting springs as far as if it would damage the integritiy of the spring or not but i think you should be ok if you did that. If i were you though i'd...
  8. F

    gt-40p exploler head question

    For $250, you wont find a cheaper price. Like was said above, you will have to find P specific headers for those heads. MAC makes a P specific shorty but you can use their longtubes on them too. If you are planning on just doing a mild sub 300whp combo the GT40 stuff is the best way to go. If...
  9. F

    E cam too much

    I agree with outlaw. I've known many people with AODE's that have put the E cam in there with horrible results. Manual cars seem to run much better with them than autos. Some milder cams are the Steeda 19, Crane 2031, and Comp Cams makes many great cams for your setup.
  10. F

    Where is your MSD 6al located?

    With a well setup ignition, you aren't really going to get much of a hp increase but your car will work tons better with the hp it has. I used to have a completley stock ignition and the car would pull hard down low but would sorta run low on breath above 4K rpms. It would be kinda waiting for...
  11. F

    E cam too much

    Just have to set the idle higher is all. If problem persists take it to a dyno and have them adjust or a/f and timing. Thats around $50 cuz its not a full blown tune.
  12. F

    Where is your MSD 6al located?

    Mounted mine here:
  13. F

    Radiator???

    Griffin
  14. F

    where do you guys buy parts for your cars

    summitracing for everything.
  15. F

    Long tubes and tuning question.

    If you have any other mods, adding longtubes and an open exhaust would necessitate turning up the fuel pressure some.
  16. F

    94-95 cobra exhaust clips?

    Don't cobra's have a little higher compression? I'd think that would change up the sound a tad.
  17. F

    Which X pipe to get for the price?

    Best X pipe ive ever heard hands down is the Dr. Gas.
  18. F

    Ultimate Engine - 94 Cobra - Give the wish list.

    Your request of "the fastest thing on the road" makes me think. Mostly any 500-600hp car can do that, but some of these guys are suggesting 1000whp+ combos on here which are all good and everything, but you have to ask yourself if you really want all that power because that is going to be some...
  19. F

    bassani midpipe sound characteristics?

    The 5.0 sound with that midpipe will be much deeper but will still be raspy. 5.0's sound AWESOME with chambered mufflers and offroad X pipes.
  20. F

    How hard is to install a pro 5.0 shifter in 95 gt............

    Its very simple to do. You do not need to get under the car. Its all done from the interior. I did it in just over an hour but thats because i started at dusk and it got dark damn quick. My friend had to hold a flashlight the whole time so i could see lol. If you're not dumb like me and do it in...
Top Bottom
Back
Forums
Menu