Search results

  1. RMODEL65

    Cracked Lowering Blocks

    theres a reason lowering blocks arent considered safe. plus the extra lenght of the bolts require constant tightning because a longer bolts stretches easy
  2. RMODEL65

    Fixing Poorly Made Fiberglass Parts (warning: lots of pics)

    yellows fade extremely quick thats one of the reasons the paint doesnt match great plus there was no blend i got a hood from freddy at mustang masters it fit great out the box gap wise im not sure where he picked it up from though? probabl at one of the many shows he attends
  3. RMODEL65

    Cowl vent paint question - 66 Stang

    the silicone wax and grease remover is what your gonna want to clean with after it evaporates there will be no harmful residue just wipe down the part with a tack cloth then prime if you use an etch primer you have to usea 2k primer over that before topcoating personally id go the epoxy route...
  4. RMODEL65

    Condensation inside of Headlights?

    drill a small hole at the top and the bottom to let the condensation escape abd make sure to wax the lights when u wax the car to help keep them from turning yellow
  5. RMODEL65

    Aftermarket Doors for '65 - How's the fit?

    i got mine from the mca augusta show a few years ago for 80$(it had a dent ;) ) but it lined up perfectly fine. im sorry i dont know what retailer originally it came from
  6. RMODEL65

    Using touch-up paint..

    its not gonna look good with touch up paint sorry but ull need to sand prime then topcoat u might want to take the car to a macco type shop and pay them 150-200 esp if u dont have a paint gun and compressor
  7. RMODEL65

    SN65 fender flares

    not tring to steal you thunder but whats the widest tire u can run in the rear of the 65 with your flare? i got maier racing on mine i got there i piece fender in the front and i put the 1.5" flare in the rear also i believe they told me i could run a 10.5" tire
  8. RMODEL65

    Thumpr cam?

    because they have the same firing order the cylinders are just numbered differently
  9. RMODEL65

    Motor Mount Warnings hatch vs vert

    theres the problem right there
  10. RMODEL65

    Fox Body Alternator on a Classic?

    look for an alternator off of a 1993and up lincoln mark8 they are 3g(130amp alternators)
  11. RMODEL65

    Anyone seen the "S Tail Lamp Kit" on a 64,65, or 66 Coupe?

    ive got the kit from mustang project that are led but i gota fastback with the 67 style spoiler
  12. RMODEL65

    65 Coupe Original Seats

    how much are you looking to get for the fronts? email me at [email protected]
  13. RMODEL65

    Just saw thr original Gone in 60 Seconds

    i like the fact that they only used one car for the whole 1974 gone in 60 seconds movie for the stunts! and that scene where he hit the telephone pole was an accident he nearly died filming that movie
  14. RMODEL65

    Mustang Drop Spindles

    +1 on a 1" drop how much do you figure a pair would run if u had enough interest?
  15. RMODEL65

    Metallic Paint Problems, Please HELP!!!

    ive never had a problem with dupont lifting anytime ive done custom stuff with my boss we would base,clear next morning wetsand do the design with dupont base and then reclear?
  16. RMODEL65

    car or college?

    anything is like that as long as u change the oil my ranger wouldnt die for anything i bould it for 1700 drove it for about 5 yrs and sold it for 1500$ my 5.0 goes without needing anything major and its got 170,000 miles and its very quick fior a vert imho
  17. RMODEL65

    car or college?

    degree pays for the hobbies easier
  18. RMODEL65

    On the subject of DIY paint jobs

    with the single stage you need a spray gun with a tip size of 1.2-1.3 busts up the material better, clear also likes a 1.2-1.3 tip 1.4 is good for base coats. now for the ppg omni line ive used the bc/cc system it was killer i painted my neighbors ranchero it laid out nice and flat with minimal...
  19. RMODEL65

    Pics and tips from owners with fiberglass deckilid w/spolier

    maier recommends some kinda of adhesive they said the vette guy use? i diddnt use it i molded mine in with glass for the trunk lock i shave it and bought a factory style release that goes beside the driver seat
  20. RMODEL65

    Pics of 17X10 on 65 fastback

    on second thought that might be y its sitting funny might have already dont that on one side
Top Bottom
Back
Forums
Menu