Search results

  1. ttop88

    can i fit 325/50/15 bfg drag radials on 15x10 welds on fox?

    27/11.5 quick time pro is as close to a 295 50 as you can get as a DR that I know of.
  2. ttop88

    can i fit 325/50/15 bfg drag radials on 15x10 welds on fox?

    Not my car. They are m&h tires. They run very narrow. A mickey 275/60/15 has the same cross section. The back was beat to death and the front lip was rolled straight up.
  3. ttop88

    can i fit 325/50/15 bfg drag radials on 15x10 welds on fox?

    Another view
  4. ttop88

    can i fit 325/50/15 bfg drag radials on 15x10 welds on fox?

    Yes, if you use a big enough hammer.
  5. ttop88

    intake manifold question

    It is a awesome intake and it is great with a blower. However, you will never see it potential without a good set of heads.
  6. ttop88

    help me win pool

    Yeah, the cam, intake, t-body, heads and the blower. EVERYTHING matters.
  7. ttop88

    welder and welding sheet metal

    Its just 22 ga steel. ANY mig welder will work fine. You will have less trouble with a 110 unit if you are not a welder. A NON flux core welder will make it even easier. (one that uses a shielding gas) If you have the fenders off dolly the hole closed first. That will make the hole much easier...
  8. ttop88

    How to convert to roller lifters...?

    Cheap and easy. This is the best way I have found and it will be cheaper in the long run. http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=350104850620
  9. ttop88

    Started the 84 t-top coupe

    How did the new pans fit? i passed up a capri that needed pans because I was afraid they would fit like chit and be a pain to put in.
  10. ttop88

    BBK shorty install ? HELP!

    Yup, I'm down to two stangs now (Out of seven cars). The old ladys 92 vert and the beater four eye coupe I picked up today.
  11. ttop88

    BBK shorty install ? HELP!

    This is the price we pay for power. Now that you have it under your belt, next time do long tubes. More power and a better sound and it won't take any longer than this did.
  12. ttop88

    Biggest tire and rim on a fox?

    Both of these were taken from the americanmuscle.com website. 8" wheel has 5.72" backspace Wheel Specifications Style: Bullitt Finish: Chrome Size: 17x8 Centercap Size: Large (2-1/2") Back Spacing: 5.72" (145mm) Offset: +30mm (1.18") Bolt Pattern: 5x4.5" (5x114.3mm) Fitment: 94-04...
  13. ttop88

    Rear quarter windows..

    3M strip caulk, aka dum dum. You need .250" I do believe.
  14. ttop88

    Overspray question

    The Mothers Clay bar would work great for this as well. It would take all the contaminants off of your paint before you grind them in with a buffer.
  15. ttop88

    BBK shorty install ? HELP!

    Depends on who made them. On my first set of equal lengths I had to jack the engine and bring it in from the bottom. One tube just stuck out too damn far.
  16. ttop88

    Biggest tire and rim on a fox?

    A pony wheel has more back spacing than that! It will be a full 2" outside the wheel well. On a 10" wheel I would run a 315 drag radial.
  17. ttop88

    BBK shorty install ? HELP!

    If your oil is that high you have a REAL issue. Just pull the tube and twist. It will come out. Cover the hole till the header is in place then put the tube back in. No need to change oil.
  18. ttop88

    Overspray question

    Wipe it off with wax and grease remover and then buff it back up.
  19. ttop88

    Four eyed coupes?

    85-86
  20. ttop88

    Four eyed coupes?

    Whats up BK? Not sure, I kinda want to run hookers. Nobody runs them and they are straight through.
Top Bottom
Back
Forums
Menu