Search results

  1. D

    #8 Fuse popping

    With the mach 1000 sub, the keyless entry module is tough to get to. But it is the next thing I will look to disconnect. I discovered that when the door lock is pressed to lock the doors, the brake lights go on. This is without fuse (which of course blows immediately when installed). Anybody...
  2. D

    #8 Fuse popping

    Without warning, # 8 fuse popped. Now, it always pops. I've disconnected radio, amp and antitheft. The fuze still blows. Any ideas on what to move next?
  3. D

    explorer elbow

    The explorer elbow is not usable. Any of the after market elbows will work, just make sure to match up to opening size of TB and intake. I believe the explorer side os 70mm.
  4. D

    Removing Airbags - Need Directions

    FYI, of what I think is interesting to know: I've gone through this before and would point out that is against federal law to remove/disarm the airbags if driven on the street. However, a previously removed airbag (stolen or deployed for example) does not have to be replaced. It is...
  5. D

    INTAKE HELP ??

    I submit that the explorer intake will be the best for a stock motor. I read through a intake compare article in allformustang.com, in technical article section, which clearly showed that below idle to 5500 rpm was best served by the explorer, cobra, Gt-40 intakes. The eldebrock intake seemed...
  6. D

    fox vs sn95 headers

    The headers are different. In particular, the Long Tube headers are not the same. The firewall setback seems to be about 1 inch further on the sn95 vrs the fox. The fox headers (351w) I went to use curved down 1 inch sooner then needed on the sn95, making the collector hit into the passenger...
  7. D

    351W Install

    I have a 351w and originally tried fitting a tubular k-member. The k-member had two slots for motor mounts on each side. The front facing mount locations cleared the firewall, but the headers hit the steering shaft. The rear facing mount position put the engine up aginst the firewall...
  8. D

    Weird Tire Rub/Wear Problem - Plz Read

    It hurts. I just had to replace two front tires due to a bad alignment. They had set toe-out and the tires were ruined on the inside. I set by own toe-in and things are running smooth now.
  9. D

    Weird Tire Rub/Wear Problem - Plz Read

    In my experience, toe out will cause the wear you describe. Y ou can check this on a flat concret pad. Take a straight edge and place it vertically against the the front tire's side wall, just outside the rim. Mark the floor where the straight edge lands. Do the same on the tire's rearward side...
  10. D

    Mishimoto Radiator Cap

    The import cap fits.
  11. D

    mishimoto question.

    There return policy is: 1. contact distributor, who will send you warranty form to fill out. 2. Fill out form, including proof of purchase and credit card #. 3. A new radiator will be shipped, you will be charged shipping cost of radiator. 4. Replace radiator and return bad unit in box...
  12. D

    Mishimoto Radiator came in...*PICS*

    How did you fit the stock overflow bottle?
  13. D

    Group Purchase: Mishimoto Radiators

    Defective rad update. I got the replacement today and it looks fine. Even included a decal. The original did not include the decal, clean instructions, unbroken packing and fully taped plastic wrap. Got the 10% back to. Thanks Mike.
  14. D

    Group Purchase: Mishimoto Radiators

    Defective Rad return update: It's been two weeks since receiving the original radiator. Mishimoto received it two days ago. They still don't have a plan for replacing it. Waiting to hear back, but could be weeks more according to the contact I spoke with I won't even neded it until next summer...
  15. D

    Group Purchase: Mishimoto Radiators

    Mike, Thx for dealing with this. Got the label and shipped it out today. BTW, the manufacturer knew exactly what the situation was and had the pic. Chris (manufacturer) said that they'd send a unit out that day and that no shipping would be charged. But then Mike, "Mr Warranty," said that...
  16. D

    Group Purchase: Mishimoto Radiators

    The top seal is required to seal so that the overflow vacuum is created at cool down. This suction, created at cool down, draws the coolant back into the radiator. If not repaired, coolant will flow out the top defective seal and some into the coolant tank, but won't be drawn back up. I'd...
  17. D

    Group Purchase: Mishimoto Radiators

  18. D

    Group Purchase: Mishimoto Radiators

    Mike at KTeller is not satisfied with the manufacturer either, so he offered to handle it directly for me. I'm fine with that and not really worried about making it a rush deal.
  19. D

    Group Purchase: Mishimoto Radiators

    I have pic that I sent them. I never figured out how to post. I can repair it. Reguies some welding to fill gouges, grinding and sanding to smooth out. Be like repairing wheels.
  20. D

    Group Purchase: Mishimoto Radiators

    Update on the rad replacement (Delivered to me defective). Not good, I'm getting tossed around and being told that I have to pay $10 shipping for the new rad and return shipping. No other company has ever charged me anything when they sent defective product at the get go. Not the...
Top Bottom
Back
Forums
Menu