Search results

  1. D

    EEC Analyzer CAM specs input

    How do I input custom cam specs into the EEC Analyzer software I know thae standard specs, but its to also requires exhaust events open and close. Comp Cams was not any help.
  2. D

    Strut Tower Brace

    I actually have a Kenny Brown STB I used with the aftermarket intake. I had to replace it with a 351w specific STB to clear the even taller 351w. My old STB is for sale, if you're interested let me know.
  3. D

    Engine swap?

    AJE sells a tubular k-member with chevy motor mounts.
  4. D

    afr pushrod

    My afr 185 pushrods were about .05" longer than the non-hardened pushrods I had.
  5. D

    So how old is everyone?

    48, retired, married 26 years, 6 kids and 2 grandkids with a 3rd on the way. If my wife doesn't stop giving me new jobs around the house I may get a job, no...not really. I find that I spend more time waiting on parts for my stang than actually working on it, although I am slowly getting it...
  6. D

    Where to start with a 95 gt

    I started with a Tweecer and 180 deg thermostat; changed fan turn-on/off speeds and timing. I tweeked my aode, and later tuned the eec to work with my new tko, and will use it to tune the 351w. I also added an explorer intake and gt40P heads, which also made a noticable improvement in power...
  7. D

    351w question

    The lower intake manifold is not interchangable between udsthe 5.0 and 5.8. The 1/2 inch stud refers only to the heads, not the lower manifold which does not have 1/ inch bolts in eith case.
  8. D

    Can pistons be ID'd with heads off?

    The description reads: Recessed head 0.110 in. deep. Approximate compression ratios: 8.56:1 with 69cc, 9.06:1 with 63cc, and 9.30:1 with 60.4cc head. I know that a gt40x 58cc head was used on it before. Any rearson the larger valve twisted wedge 58cc neads can'tr be used. looks like about...
  9. D

    Can pistons be ID'd with heads off?

    Here they are at summit: http://store.summitracing.com/partdetail.asp?part=TRW%2DL2446F30&N=401105+4294908331+4294840125+115&autoview=sku Now I work on my CR.
  10. D

    Can pistons be ID'd with heads off?

    The symbol on the piston is a speed pro symbol: http://www.campbellenterprises.com/trw_pistons_speed_pro_pistons.htm I'll e-mail them the part numbers.
  11. D

    Can pistons be ID'd with heads off?

    Thanks, Found this number on the piston top L2466 030 31101 with a symbol that looks like alighting bolt go up within a cirlce.
  12. D

    Can pistons be ID'd with heads off?

    I took a closer look, and do see flycuts within the diashed area.
  13. D

    Can pistons be ID'd with heads off?

    I have a mildly built, low mile 351w w/o heads. I'm rying to identify the pistons before buying heads so I can determine the CR and correct CC size to order. The previous owner said that they are TRW forged ffycut pistons, but they don't look flycut to me. They have a large oval dish shape in...
  14. D

    94-95 bellhousings

    If you do go with the stock bellhousing, I have the bellhousing shifter cover plate (inspection plate) I can get to you for $20 shipped within US.
  15. D

    Exhaust leaks do matter

    Had to replace my or-hipe with a catted pipe. I just stuck the air pipe tube in place. I lost a noticable amount of power, but just figured it was the cats. Well, after 5k miles I finally got the air pipe welded up (I was in getting the WB o2 bung welded in). I was shocked, it put me back into...
  16. D

    94-95 bellhousings

    Convert to the standard bellhousing. I decided to go that way myself, then went rest of the way to a tko.
  17. D

    MANUAL TRANNY HARNESS....

    http://www.corral.net/forums/showthread.php?t=763852
  18. D

    i Can't Install my transmission , Whats the Trick ? 1994 GT 5-speed

    I install two studs onto the bellhousing were the tranny mounts. With the Bellhousing installed to the block, I slide the tranny over the studs and inch it forward, often having to turn the yoke to get the splines to line up. Never had to tighten the bolts to pull it in, but I do tighten the...
  19. D

    Wiring Diagrams???

    I use the autozone wiring diagrams for my 95 GT. Have been very accurate. http://www.autozone.com/servlet/UiBroker?ForwardPage=/az/cds/en_us/0900823d/80/1d/db/3c/0900823d801ddb3c.jsp
  20. D

    Yet another lame question from a Noobie

    The calibration needs to be used within the same startegy family, otherwise you get bad parameters. You can test it out using just the caledit software and see the crazy numbers that result.
Top Bottom
Back
Forums
Menu