Search results

  1. tom281

    Ford Racing CMVC Delete under $100

    No, you just reuse the original gaskets. No, I don't notice any difference in sound.
  2. tom281

    Ford Racing CMVC Delete under $100

    Install took me about an hour, including stopping to take pictures every couple of minutes. Here's the highlights: FRPP plates: Engine with intake removed: Factory intake with factory plates still bolted on: Close up of the seals- remove these from the factory plates and...
  3. tom281

    Ford Racing CMVC Delete under $100

    I have a custom tune from Brenspeed, but they modified that just for the addition of the plates and re-emailed it to me. So, I guess it's kind of like a custom canned tune:rlaugh:. Like I said I'm going there next week to get the tuned on the dyno with the plates installed. I was at 296/316...
  4. tom281

    Ford Racing CMVC Delete under $100

    I like the mod- I can post pix if you want. The only thing that I dislike about the mod (so far) is that upon cold startup, my car idles at around 1500 rpm for several seconds, then slowly comes down. Brent at Brenspeed may be able to adjust for this though......... Otherwise, easy install...
  5. tom281

    Ford Racing CMVC Delete under $100

    I installed mine a couple weeks ago. I didn't buy them from Summit though....... http://www.pmpparts.com/ or www.lightningforceperformance.com I'm going to Brenspeed next Monday to get dyno tuned. Thanks, Tom
  6. tom281

    Correct way to do a burnout...???

    look here: http://rpmoutlet.com/05gtjet.htm
  7. tom281

    Ford Racing CMVC Delete under $100

    I bought mine 2 weeks ago for $95 delivered. Can't beat that!
  8. tom281

    Installing Steeda Under Drive Pulleys

    C'mon Rich, just do it........ Remember that whole peer pressure thing?????
  9. tom281

    Got Jenn'ed today.

    Uh, no offense, but I think we were hoping she'd explained it........ sounds A LOT different coming from a dude. :rlaugh:
  10. tom281

    Problems with LCA

    Keep us posted with what they say......
  11. tom281

    Got Jenn'ed today.

    Yeah, I don't get it either........ maybe a drawing, or some pictures (:D ) would help clarify.
  12. tom281

    Got Jenn'ed today.

    Did someone say boobs?
  13. tom281

    Problems with LCA

    I have these same control arms, and have no issues. Did you make sure to install them with the offset facing the correct way? It's been so long that I don't remember the specifics, but there is a specific way to install them. I don't mean to say that you installed them wrong, just trying to...
  14. tom281

    Brenspeed SCT X-Calibrator 2 Custom Programmer Arrived Today

    Installing a tune is the first mod to do on these cars. If you can spring for a tuner AND cold air kit such as JLT or C&L, you will be amazed. My car stock dyno'ed 264 horse. With Brent's tune, JLT II kit, and offroad H I got 296 horse. Brenspeed dynoed the offroad H pipe separately and it...
  15. tom281

    Brenspeed SCT X-Calibrator 2 Custom Programmer Arrived Today

    Next stop: gears- and head straight into the 12's!
  16. tom281

    CEL-Check engine light code P0340

    That's alot of miles on the car! You must be enjoying it :nice: . Anyway, hope you get'er figured out. Also, try posting at modularfords.com- there's some pretty good tech-heads there that may know. Tom
  17. tom281

    05/6/7 cdc shaker hood pics?

    I installed it myself- took just over 3 hours. I was talking to an installer at Brenspeed, and he said it's been taking him about 3 hours too. As long as you can get over the initial fear of cutting your hood, it's actually a very easy install. The hardest part for me, was actually...
  18. tom281

    CEL-Check engine light code P0340

    Can't help ya........ I asked about the pullies because I've read that if the crank pully isn't torqued properly, you can get some kind of crank position fault. However since you don't have aftermarket pullies, I doubt that your pully is vibrating or the balancer has failed. Maybe since you...
  19. tom281

    CEL-Check engine light code P0340

    Is the CAI and tuner your only mods? No pullies?
  20. tom281

    05/6/7 cdc shaker hood pics?

    Sure. A couple more available here: http://www.cardomain.com/ride/2377171
Top Bottom
Back
Forums
Menu