Search results

  1. Ourobos

    AFR vs. Trickflow cylinder heads

    I'de say the 165s and the RPM II, and a better cam, TFS stage 2 or 1.
  2. Ourobos

    Tire wobbling, whats are the possible causes???

    I had a bent pony wheel like that. Buddy following me said it wobble back and forth, but I couldn't feel it. New wheel in order possibly.
  3. Ourobos

    MSD6A install w/pics

    Couldn't be much worse than this.. Did you put it under the hood?
  4. Ourobos

    how do i disconnect the fuel rail?

    It's a three clown job: one clown to insert the tool and compress the spring, and one clown to pull the coupling apart when the tool is properly inserted. The third clown gets gas squirted in his face because none of the clowns thought to bleed off the fuel pressure. LOL
  5. Ourobos

    supercharger shipping weight

    Not exactly, but I sold just a V1 head once, and it weighed like 19 lbs.
  6. Ourobos

    how do i disconnect the fuel rail?

    Make sure you get the four rail bolts back in good also, no matter how you go about it. I left one out once, and my rail popped off, setting my engine ablaze. BTW see my post on corral.net about the tools. Good luck.
  7. Ourobos

    GT 40 Heads Question

    That all sounds good. Make sure you don't TRY the bosche platinums with those heads.. (Sux0rs)
  8. Ourobos

    NO CHARGE ABOVE 4K RPM??

    Check your ground strap to the back of the head. Make sure it's there and isn't frayed.
  9. Ourobos

    Winter Project buildup Questions...

    You MAY gain a few HP in the upper RPM range without upgrading the heads also. If you do the cam, do the heads or don't do either IMHO.
  10. Ourobos

    Broken pedistal RR mount, am I the only one?

    Pedestals I have broken many of the stock bolts off in the pedestals on my old GT40 heads. I ended up tapping the 5/16 holes out to 3/8 and machining the rockers out for socket head cap screws. Never broke another.
  11. Ourobos

    need some help with the adj fuel pressure regulator

    Did you set it with the vacuum off (finger over the hose)?
  12. Ourobos

    Some new pics of my Stang before Winter storage HUGE DUW *PICS*

    ^^ LOL Sirsureshot.. nice photoshop
  13. Ourobos

    Has this site been hacked

    Yup That's where I ended up.. Any moderators see that?
  14. Ourobos

    Has this site been hacked

    Wassup with the classifeds? I keep getting pulled into some dude's stuff, not a bunch of items? Also getting popups at www.stangnet.com . Has this site been hacked, or is my 25 years of PC experience useless.
  15. Ourobos

    Help me justify just buying Mac LTs and X pipe

    I had them.. loved em.. hope that helps.. It depends on your wallet.. as usual..
  16. Ourobos

    Burp the system

    May not open at all, may open when the latent temp reaches 180.. which would take alot longer. Back to the topic, the best way to burp it is like said, run the head wide open with the cap off until it heats up, then add coolant, close it up, and go.
  17. Ourobos

    Need HELP drilling out Broken Valve cover bolts!!!

    Skoobie is exact with the easiest way to do it, I've done it several times. Thing is, he said these are stainless bolts. Good luck with that one. I would recommend you grind them flat to the head first, then possible a carbide bit will get a starter hold going. If you can get one hole deep...
  18. Ourobos

    Stock rocker arm bolts, WTF

    And stock pedestals are 5/16 anyways.. Torque them to 26 ft/lbs.
  19. Ourobos

    shocks struts and springs install question

    The rears are a breeze. Should take you no more than an hour on them. On the fronts, you may want an inner spring compressor. I couldn't even get a jack under my a-arm without the springs compressed. They were so tall that they kept the a-arm vertical. Fronts are no 'easy' job, but do-able...
  20. Ourobos

    x-pipe vs. h-pipe

    I ran MAC 1 5/8 longtubes with a 2 1/2 Dr. Gas Xpipe and 2 chamber flowmasters.. Sounded evil. Just sold it yesterday. :( (going 3")
Top Bottom
Back
Forums
Menu