Search results

  1. cruisinV6

    What to do

    I would find out who is responsible, show the kids' parents the damage and see if thy will help with the cost of repairs. The parents are responsible for the kids' actions while they live in their house and are under 18.
  2. cruisinV6

    Underdrive Pulley Question

    I believe its all belt size anyway. If you supercharge it in the future, you will need to make sure you get the correct size belt. I am almost positive it will work with no adverse affects as long as you get the correct belt size.
  3. cruisinV6

    supercharge or turbo

    V6 to V8 swap is way more involved than most people realize. Best bet for power quick would be to use Nitrous, and also do an intake swap to the 99+ as it went to double port intake that year and will gain you 25 HP right away. Then maybe exhaust, CAI and UD pulley to round it off, all can be...
  4. cruisinV6

    Bumper mounting locations

    Hey guys, Been a long time since I was roaming around on here. I'm in the market for a new bumper this spring through a series of "fortunate" accidents. Mostly minor ones like people hitting my car in a parking lot and making the paint flake off. Anyway, I'm looking at getting an 03-04 Cobra...
  5. cruisinV6

    Dose anyone have a mustang like this?

    A few mixed match parts at that. 99 was the 35th annv. for the stang. Some owners ill never understand their decisions.
  6. cruisinV6

    HELP "POWER WINDOW CRISIS"

    I had the exact same problem a few weeks ago, only the driver's door window. I pulled of my door panel, unhooked and hooked up the wiring harness, took out the fuse for the window motors, and unhooked my battery for 15 mins. put everything back and it worked fine. I have no idea what caused it...
  7. cruisinV6

    02 MUSTANG V6 DUAL EXHAUST

    If you REALLY want volume, go with an O/R x or H pipe. That's what I did. Sounds good up to about 3200 RPM, then the V6 sound really kicks in, kind of ricey, but not too bad.
  8. cruisinV6

    MUAHAHAHAHAHAHA!!!

    Haven't seen you around much man. But then again, I haven't been around much either. What's new? How's life?
  9. cruisinV6

    engine cooling fan won't come on (1995 mustang)

    I would have to agree with above, I wouldn't have them do any more testing on it. I would say your best two possibilities would be to go ahead and do the aftermarket thing like 2muchtime says or go with just a manual switch. When i did the manual switch it took me maybe 15 mins to install, super...
  10. cruisinV6

    engine cooling fan won't come on (1995 mustang)

    I have a similar problem on my 99. Fan hasn't worked as far as I know for the 4 years i have owned it. Last summer I finally re-did the positive wire conection. I tested the wire along the way and it losses power somwhere in the wiring harness(no idea where). So i just spliced into it at the...
  11. cruisinV6

    Any way to permanently disable a sensor that's triggering a Check Engine Light?

    I have the same exact problem with my car, a 99 also. Heard it was about a 400 dollar trip to the dealer so I havent fixed it for the past year and a half. I figured when I put my O/R x-pipe on, if I dont get MIL eliminators, the light will be on anyway.
  12. cruisinV6

    Online Buyers Guide

    How about Supersixmotorsports.com and rpm-mustangs.com
  13. cruisinV6

    MustangGT

    As far as I know, this may be different in Europe but I doubt it, the GT model is the V8 4.6L. The 3.8L is most likely the car you are looking at, its a nice vehicle. A EURO3, I have no idea what that is, maybe it exists? I really do not know anything about Ford's models over seas.
  14. cruisinV6

    Gt hood scoop installation

    hopefully it still has the bolts on it. You will have to mark the holes you need to drill on the hood somehow, this part is key to get it jsut right. I had my holes spaced out a lil bit too much and the scoop never sat right. It is really easy to do, just make sure to get the holes right. I had...
  15. cruisinV6

    Where can I find a intake gasket ????

    I know you can get one over at rpm-mustangs.com. good guy there runs that place. its on the website as part of a gasket kit, but if you call him I'm sure he can send you jsut want you need for your application.
  16. cruisinV6

    MAF/TB

    im not sure exactly, but be careful of the thortle cable positioning. It may have changed when they redid the intakes on the new style to the split port.
  17. cruisinV6

    V6 with hood scoop - stock?

    In 2003 there was also the Pony Package (I think it was called) and it was an appearance package that included the GT hoodscoop.
  18. cruisinV6

    mustang hoods

    Cervini's Stalker hood is killer. Got mine used, then painted to match, for about $650. Exspensive, but very worth while!~ And anything does beat the stock look, I had put the GT hood scoop on my old hood a while back, that's fairly inexspensive, and does a lot for the looks.
  19. cruisinV6

    Your best/worst self-install

    Damn, that is some list of minor problems there. But you do have a SC, which I want real bad. Most exspenive would be the used Stalker hood, cost about 300 shippped, but had some rock chips, so cost me another 325 to get it repaired and painted. Looks awesome as hell, and was worth it since it...
  20. cruisinV6

    fog light site

    Its from Velocity Mustang Performance. It's where I got mine, great guys working over there. http://www.vmptuning.com/cart/home.php?cat=9 From here just select the year of your car, you can get a complete kit, easy install.
Top Bottom
Back
Forums
Menu