Search results

  1. Wallzy

    Dyno Tuning Question...

    Bubba-dough, Overall i was just curious to know what people's before and after stories were; I really wasn't looking for specific numbers to get excited about or claim that "my car will have this when/if i tune it." I am planning on tuning my car for drivability because there are a few...
  2. Wallzy

    17x9's rubbing strut

    more offset
  3. Wallzy

    Dyno Tuning Question...

    I have searched thru the forum and haven't found exactly what i am looking for. I know that the overall driveability would be improved as well as the total area under the curve but i am looking for some before and after numbers for SC cars that have been dyno tuned. Besides the max power that...
  4. Wallzy

    need some imputs please

    I hate these questions - FAIL :nonono: Walz
  5. Wallzy

    how to tell

    haha, direct and obvious, nice! Walz
  6. Wallzy

    Hey carb guys!

    Flyby84, With that cam i would imagine you are making peak power around 5500-6500 RPM, and with your 306 you will be pulling 576cfm@6500rpm, 620cfm@7000rpm and 664cfm@7500rpm - when do you plan on shifting? Your peak cfm should be how you choose a carb becaue of the velocity to vacuum...
  7. Wallzy

    metal coolant line on intake

    yea, the bottom one is the one that turns. Walz
  8. Wallzy

    metal coolant line on intake

    Yes, the bottom part will thread out and remain connected to the top part - remember to use a second wrench when holdint the top part to prevent damaging the line. Walz
  9. Wallzy

    what mass air?

    Pro-M makes an incredible product, they should be able to help you out. Walz
  10. Wallzy

    24lb injectors

    I am not trying to be mean, but those should have been questions asked before you purchased them - if you do not know the brand, do you even really know that they are 24# injectors? Walz
  11. Wallzy

    quick question about intake install

    I put a very thin coat of silicone on both sides. I also like to use thread lock on the threads if i'm not using a lock washer on top of a flat washer, but i don't think that you would have a problem with a dab of silicone there either. Walz
  12. Wallzy

    Loc-tite on flywheel bolts?

    loc-tite = :nice:
  13. Wallzy

    Crazy 408 in the works....Compression Ratio question

    347HO, I'm not here to start an argument with you, was trying to provide insight into cause and effect. I can't count the amount of camshafts that i have degreed on chevy, dodge, or ford nor is that really important to me. I have spent my time behind a dyno, flow bench, spintron and...
  14. Wallzy

    Crazy 408 in the works....Compression Ratio question

    347HO - "In my experience, you are incorrect... cylinder pressure is extremely important and is never misleading. You can dial in a camshaft using cylinder pressure, you cannot using CR." What i am saying is that cylinder pressure is a result of camshaft duration and overlap as well as a...
  15. Wallzy

    compression test results

    I would say that your fine; not one cyl is conciderably low. I am under the impression that you have the stock camshaft in the car - which if you didn't may be another reason...but sometimes the cam timing or lifters may have an effect on cyl psi. For instance if your timing chain was...
  16. Wallzy

    Crazy 408 in the works....Compression Ratio question

    90LX - My bad, yes it is 3 - 4bolts can be done. 347Ho - Average Cyl Pressure is often misleading because it is highly dependant on the overlap of the camshaft, that's not to say that CR has absolutly nothing to do with it, but same compression ration and different camshafts can have dramatic...
  17. Wallzy

    Help with 5.0 Stock Hydraulic Lifters

    Rollers.
  18. Wallzy

    new brake upgrade

    Search Function
  19. Wallzy

    Crazy 408 in the works....Compression Ratio question

    2 - 4 bolts can be done, the cap is usually match drilled to thru the block at an angle, have actually seen this done very successfully a few times. As for CR, I assumed flat top pistons with no valve relief. I also assued the ring gland is in the noise for most calcualtions unless you are...
  20. Wallzy

    Question about timing

    Timing wouldn't be the only thing that would affect it, could also be going lean/rich. Start by letting us know what you have done to your car. Walz
Top Bottom
Back
Forums
Menu