Search results

  1. K.C.90gt

    anyone with an inline fuel pump please help

    so 8mm would be alright? cool thanks.. I need to get a relay too for this pump also, a 30 amp right? I think I remember reading that somewhere.... I just want to make sure I have everything i need before I start the install..
  2. K.C.90gt

    anyone with an inline fuel pump please help

    i dont think I need those adapters.. I just wanna know what inlet/outlet adapter I need from this list on this page Inline Walbro pump link, CLICK ME
  3. K.C.90gt

    anyone with an inline fuel pump please help

    I know where to install it I just dont know what fitting adapter sizes I will need when I order this, its a universal pump and you have to pick the adapter fitting size.. I was just wondering what size I need to fit the stock ford fuel lines, like what size are the fuel filter nipples that the...
  4. K.C.90gt

    anyone with an inline fuel pump please help

    i know they have a list of fittings but what size fittings fit the stock lines? Will I need two of these pumps or just one? I have a walbro 255lph intank right now..
  5. K.C.90gt

    anyone with an inline fuel pump please help

    TTT... anyone? no one runs an inline? :(
  6. K.C.90gt

    anyone with an inline fuel pump please help

    I am probably gonna get the universal inline Walbro GSL392 pump (255lph) and wanted to know what size inlet/outlet adapters I will need. I have stock fuel lines and tank/filter/etc... Also does anyone know if this is the high pressure version. I found it on www.fuel-pumps.net link and I have...
  7. K.C.90gt

    Driving a manual

    the first car I drove that was a manual was my mustang. All I did was drive it around the block a few times and then out on the street I was fine. Just takes about a week to get decent at it. But don't sweet it, its easier than you think. Just remember, YOU DONT HAVE TO RIDE THE CLUTCH OUT...
  8. K.C.90gt

    Fog Light Problem!!!!!!HELP!!!

    i was having the same problem as you with mine with my stock foglights, one would only work once and a while so I took apart the fog light and noticed that the bulb wire that connects to the fog light housing metal was all rusted, so I sanded down the connection real good and sprayed it down...
  9. K.C.90gt

    DYNO Guesses & 1/4 times?- Going April 15th

    i think around 330-350RWHP, but with a 2.0 60 ft I think high 12's around 112-114. Only reason is because I had a stock HCI 5.0 with ATI procharger 3-core IC seeing 10 lbs or a little more with basically same mods: 1.7 rock, bbk headers, o/r h-pipe, flows, 3.73, alum driv, 36lbs inj, 75mm MAF...
  10. K.C.90gt

    For the Guys who have removed their Front Sway Bars!

    another here with no front swaybar. No problems with handling at all and I even take corners fast sometimes with no problem.
  11. K.C.90gt

    Looking for advice on Drag Radials

    im running the 255/50/R16 BFG comp DR's on chrome ponies and have gotten about a year and a half of daily summer driving on them. They are now bald and one leaks pretty bad from a bunch of small holes. They pick up every pepple on the road but they are excellent tires for traction. They wear...
  12. K.C.90gt

    IGNITION SETUP???

    dude any brand cap and rotor should work fine as long as its for the right motor. MSD cap and rotor should work just fine with crane ign. I have MSD 6AL, MSD blaster coil, MSD Cap and rotor, Ford distributor and everything works fine, I have also used ACCEL cap and rotor and Ford and it was...
  13. K.C.90gt

    Kirban regulators good?

    i had an aeromotive FPR but it was too wide when I put on new intake so I bought a kirban and sold the aero to my brother, I did not have a problem with the aero and it was a good piece but is was a lot more money, I should've just got the kirban to begin with, its about stock size and works...
  14. K.C.90gt

    Chrome Door Handels?

    I think it would be a good idea to use new rivets, because I am not sure if you can reuse your old ones. Like I said I still have the chrome door handles sitting in my room waiting to go on. I haven't got around to putting them on because of weather and busy with work and girlfriend so I dont...
  15. K.C.90gt

    new interior and racing seats

    www.autoleathers.com is a pretty good place for redoing your oem seats. They are decently priced for front and back seats. You can pretty much get any style you want and color, even different stichings and lettering. My friend has them in his 99 SS camaro, they send you the fabric and a kit...
  16. K.C.90gt

    Chrome Door Handels?

    Mine came with the rivets so I didnt need to get them seperate.
  17. K.C.90gt

    Chrome Door Handels?

    this is where I got mine.. they are nice.. I still have them sitting in my room though.. haven't gotten around to putting them on yet. http://www.dallasmustang.com
  18. K.C.90gt

    Drag radial ?'s

    Thanks Sevan! yea its like a big boat drivin down the road, I've driven it before and its a tank. Gets lots of looks too, even more then my stang :D hehe
  19. K.C.90gt

    Drag radial ?'s

    I have the BFG's 255/50/R16's and they hook great, but if you drive daily you might want to try nittos or others unless you like replacing tires after a year or so. Mine are bald now and have all kinds of holes in them, they are so soft they pick up every pepple on the road and it sticks in the...
  20. K.C.90gt

    Why do you have to remove starter?

    it depends if your pulling the motor out with the trans still attached or not. If you are leaving the trans in the car and just pulling the motor than you will have to remove the starter in order to disconnect the bellhousing from the motor. If you pulling the trans/motor still connected than...
Top Bottom
Back
Forums
Menu