Search results

  1. bill302

    Transmission ID, pics

    http://en.wikipedia.org/wiki/Ford_AOD_transmission
  2. bill302

    How to tell what gear ratio is on ford gear

    what brand of gears are they?
  3. bill302

    bout to give up!

    what kind of cable are you running and do you have a firewall adjuster,clutch quadrant or running stock quadrant and cable...how does the throw out bearing look when you replace clutch. clutch could be out of adjustment or stock quadrant could be defective not allowing clutch to fully...
  4. bill302

    I need help!With 1995 GT

    do not crank it until you check the balancer you can damage the engine. a bad balancer will have the symptoms you describe...
  5. bill302

    What should I do next? Thanks for the help!

    first i would check for vacuum leaks...
  6. bill302

    How to tell what gear ratio is on ford gear

    divide the number of teeth on the ring gear by the number of teeth on the pinion gear, example: 41 teeth on the ring gear & 10 teeth on the pinion gear = 41 divided by 10= 4.10..
  7. bill302

    Need help solving KOER error codes, 12,21,41,91

    a bad ect sensor could cause all of these codes If the sensor reading is lower than normal, the PCM will think the engine is hotter than it really is and enlean the fuel mixture and advance timing, which makes for cold driveability and idle problems. you can test the sensor before replacing...
  8. bill302

    Timing ?

    On 87-93 cars its at the end of a wire that is hanging near the distributor...its called a spout connector. WELCOME TO :SNSign:
  9. bill302

    alternator amperage??

    130 amps.
  10. bill302

    PIP?????

    The primary function of the TFI-IV ignition system universal distributor is to direct the high secondary voltage to the spark plugs. In addition, it supplies crankshaft position and frequency information to the ECA using a Profile Ignition Pickup (PIP) sensor in place of the magnetic pickup or...
  11. bill302

    1.7 rockers always tick like a sewing machine?

    read the aritcles below in the links i posted pushrod length can be a factor in your valvetrain noise links describe how to check and what to look for also if the valvetrain geometry is off you can Build your own homemade adjustable checking pushrod. Take a common 5/16-inch OD stock-type...
  12. bill302

    Stock Rocker Arms

    pedestal mount...
  13. bill302

    Any suggestions: MY 88 cuts out at above 1800rpm.....

    same thing happened to me but the check engine light illuminated on mine and i noticed my evp sensor wire harness was not connected. the evp is mounted on top of the egr valve, i connected it and it ran great...might want to check that...also check for vacuum leaks...
  14. bill302

    How do you bench bleed a master cylinder

    click on link below its a chevy magazine article about bench bleeding but it has some nice pictures and the master cylinders are identicle... http://www.superchevy.com/technical/chassis/brakes/0509sc_bench/
  15. bill302

    94/95 Convertible Subframe Connectors

    both are good brands i would go with the best price...wow $250 to install, it should cost around $50 thats the price here...might want to call some muffler shops. we have a muffler shop here that does it for about $40.
  16. bill302

    95 gt - Will not turn off - Ignition loose -

    replace ignition lock cylinder see instruction below....see 1-9 under removal and installation.picture in figure #30 shows the steering wheel removed but it does not need to be removed...
  17. bill302

    Randomly Dies

    pull codes and repost results click on first link for directions on how to do this without a code reader...and click on second link below to learn how to clean iac valve which may fix your problem.... http://www.muscularmustangs.com/test1.php http://www.muscularmustangs.com/iac.php
  18. bill302

    self test?

    anytime...your welcome..you can also click on the link i copied the picture from, there is some good info. there..link is below the picture..
  19. bill302

    self test?

    copied from:http://www.muscularmustangs.com/test1.php
  20. bill302

    Need help, car won't run....

    click on link below and within the link click on (Cranks but No Start Checklist - jrichker) http://forums.stangnet.com/showthread.php?t=643651
Top Bottom
Back
Forums
Menu