Search results

  1. ramjetlx

    help with nitrous

    Im using a 135 shot on my speed density with stock 19lbs injectors. No problems here. I set the timing to 8 degrees retard, 50psi on the fuel and throw in some octane boost on 92 octane. I also went two steps colder on the plugs and gapped them to 35. Hope this helps you...
  2. ramjetlx

    Bumpsteer kit, balljoint & bushing questions

    Yes they are compatible. I just installed Steeda c/c plates yesterday. It was fairly easy except for removing the strut nut. It was rusted so I had to remove the strut to take it off. Its a simple job, just labor intensive. Its well worth the 200 dollars I spent. It replaces the rubber bushings...
  3. ramjetlx

    useing a Dry kit on a 95 5.0

    Never heard of this on a dry kit. Only jet I have is the one that sprays the nitrous into the intake. Is this correct?
  4. ramjetlx

    Rotors?

    Go with the Power Slots. Steeda and now Summit have them for about a $100 a piece. Throw on some good pads and you will be happy.
  5. ramjetlx

    Bumpsteer kit, balljoint & bushing questions

    I am using the steeda bumpsteer kit with Eibach pro springs. The outer tie rods also sit at a slight angle. I would replace your tie rods first and see if it fixes your problem. Adding springs will only make things worse. I ended up replacing the entire steering rack,tie rods and steering pump...
  6. ramjetlx

    Roller Rocker question

    Its much easier to install rockers then a cam. Theyre actually simple bolt ons, the adjustments are the most difficult part. Upgrade the springs and you will feel a difference throughout the powerband. I did get valve float with the stock springs over 5000 rpms, so its a good idea to change them.
  7. ramjetlx

    Guys running eletric fans, what alt. you running?

    I have a dual 11" spal and Im running underdrive pullies also. Im using a Powermaster 140 amp. I also have PIAA driving lights, MSD box, nitrous system hooked up also, no problems with power.
  8. ramjetlx

    Why dont people run higher gears?

    I hope youre joking that a civic is real good at acceleration. I have yet to see one even accelerate quickly halfway decently.....
  9. ramjetlx

    How long for springs to drop?

    You have urethane spring isolators, so it might not drop as low or as quickly as rubber ones....
  10. ramjetlx

    track times...

    The talon had no traction off the line and probably going through the gears. Before I would run 101 mph at 14.5. Then I learned how to launch my car. Your mph seems about right for a car on street tires, mine is about there also. More practice is what you need.....
  11. ramjetlx

    Mods you wish you had not made???

    Same thing here. Switrched over to copper gaskets. Even the bolts were junk that came with it.(changed those too) I realized all gaskets and bolts that come with BBK products are crap.
  12. ramjetlx

    PA valve body VS. Transgo/Baumann shift kit

    Sorry everyone. Cant seem to upload video to here. But I can email to anyones pc if they are interested. Just pm me with your address....
  13. ramjetlx

    PA valve body VS. Transgo/Baumann shift kit

    Check out my garage. It has my mods to my car. I am currently using a 3000 stall with a hardened input shaft.(not one piece) I talked to Greg at Baumann engineering and he set me up with a combo that could handle over 400 horses. He told me to stick with a lockup since this is a daily driven...
  14. ramjetlx

    shift kit for auto 90' LX

    Yep, thats what happened to my Trashgo while using nitrous. Burned a new OD band after one month. Now I just have 3 gears, but thats better for me at the track, but not on gas while cruising the highway. Shifting into OD really messes up your ET. Stay away from Trashgo!!!
  15. ramjetlx

    PA valve body VS. Transgo/Baumann shift kit

    Get the manual valve body!! Dont waste your money on a Trashgo. Shifting into OD is not good, the stock bad is too weak. I burnt out my new OD band in a month using nitrous. It would shift into OD from the D position. Trashgo gave me too many problems about it and my shop wouldnt admit they...
  16. ramjetlx

    Where to get subframe connectors with seat brackets?

    Try Kenny Brown. They have some also.
  17. ramjetlx

    91 AOD stock running 17.8 (CO) what can I do?

    My stock aod with 2.73s went mid 15's, and thats mashing the pedal down and spinning bad. As mentioned before, easing out of the hole is going to do alot more for you then just stomping on it. Get some gears, converter and shift kit. Thats the biggest improvement you can for now besides nitrous.....
  18. ramjetlx

    Long tubes or equal lengths?

    I have no problems with my BBK equals either. I just bent up the plug boots more to avoid burns. The cheaper headers are going to give you problems. You get what you pay for.......
  19. ramjetlx

    Eibach pro kit???

    It lowered my front an 1.5" but the back sits higher, even with the battery in the back. But mine is a 87 coupe though. I can fit 245/45/17s all around, but up front they rub at turn. I did get some bumpsteer so I had to change the outer rods to the Steeda bumpsteer kit. The 90's and up got the...
  20. ramjetlx

    H Pipe Sound

    I have BBK catted h-pipes. They are loud, but then again I have Super 40's and BBK equals also. The Super 40's give a very deep bass tone, its crazy. The catted h-pipes give more drone at 2000 rpms, when I had an off road I could hardly notice it. I paid about $365 for my BBK catted h-pipe. If...
View older results
Top Bottom
Back
Forums
Menu