Search results

  1. H

    Cobra brakes -> '02 GT

    If you get front Cobra rotors you'll also need Cobra calipers+brackets+hoses.
  2. H

    White Face Gauges

    Pics? :D
  3. H

    Mach 460 6 disc swap completed

    Mr. Burton.
  4. H

    Q's about Tokico suspension kit

    These are the non-adjustable Tokicos, I think. Not Illuminas.
  5. H

    Emission Failed>>>>

    Why wouldn't it still work if it's been sitting? Unless you jammed it full of ***** while it was leaning against the wall.
  6. H

    Where to get subframes installed?

    What's "regular" length?
  7. H

    when i hit the tree...

    Just swap bulbs from the other foglight, dude. If it doesn't work, then your harness is FUBARed.
  8. H

    Clear Corners from eBay

    I didn't say I owned the same Mustang for all 12 years. :) 6 in a Fox, 6 in an SN95. At the end of my ownership of the Fox they weren't really scratched up, just yellowed.
  9. H

    Need Help Installing Clear Corners!

    I did buy them off eBay, but they were part of a set that included the Cobra-style headlights, so I can't say anything about cheaper or not. I did notice that the weather-stripping on the corners isn't as good as the stock parts, but hey, you can't have everything, can you? :)
  10. H

    Projector Headlights?

    Who makes a projector set for the 94-98?
  11. H

    Where to find Pony Calipers??

    The entire Bullitt fronts kit is $400 at mustangparts, including stock Cobra hoses. The Cobra hoses are actually much thicker than the stock GT ones which I was just looking at a couple of nights ago. I was shocked at the difference.
  12. H

    Cobra Brake Conversion

    You'll need copper crush washers to go along with your banjo bolts and new hoses.
  13. H

    Clear Corners from eBay

    In the 12 years I have owned a Mustang, I have never owned "rok-gards" and I have never had a headlight cracked by a rock.
  14. H

    Tips on replacing the Clutch Kit, Clutch Cable and Quadrant

    Don't get any grease/oil on your clutch or flywheel.
  15. H

    White Face Gauges

    I'm pretty sure mine connected to the brown wire. The dimmer and gauges are controlled independently. Of course, the needles are controlled by the dimmer.
  16. H

    Need help....rim sizing, what these numbers mean?

    More like a monster, monster, monster truck! That's a huge rim! :D
  17. H

    Need Help Installing Clear Corners!

    I just installed these last Friday. It's dead simple. They're held on by a single nut. Just look in front of the radiator support and behind the headlight housing. You should be able to see the three headlight mounting bolts. To the side, where you'd expect to find it, is the single...
  18. H

    MM Caster Camber plate & shock install

    Do you still need an impact wrench for the bigass nut on top of the strut? I recall needing one on my old '89.
  19. H

    Stupid Question: 94-98 Headlight adjustment?

    I know the bolt between the headlight and marker light is adjusted by a regular phillips-head schrewdriver, but what tool do you use to adjust the other two bolts? They look like they have a hex end on them, but it's really thin.
  20. H

    borla cat-back 99up gt

    You painted your differential bump stop?
Top Bottom
Back
Forums
Menu