Search results

  1. myslo50

    8" steel wheel

    does ford make a 8" steel that will fit the 5 lug mustangs. if so what did it come off of????????
  2. myslo50

    EFI TO CARB

    u need to hook up a scan tool to it to see what sensors are doing my buddy had a problem with idle when he pushed the clutch in and out, found out it had a bad ground in the tps ground wire. incorrect maf meter for injector size will cause problems. check to see if the maf conversion was...
  3. myslo50

    mac longtubes

    keep all the pipes 3". just put a quieter muffler in its place or just put convertors on. keep the 3" for improvement down the road. trust me u will get the bug for more power when the 347 isnt enough, everyone does it. jaay allen is building a cam for my buddies 347, hes got mac 1 3/4 primarys...
  4. myslo50

    block ?

    what years was the 351w a roller block, the factory block what years was the 460 a roller blockif there was a roller block offered
  5. myslo50

    typhoon intake

    i wouldnt mind loosing a little down low. my car doesnt hook as it is. i wouldnt mind having a little more up top too. plus it will match the powerband of my cam.. i dont know im asking u guys for your opinion
  6. myslo50

    typhoon intake

    you know i dont speak spanish...........speak english
  7. myslo50

    typhoon intake

    i tried tmoss website and i couldnt get the site to come up. thanks for clearing things up with the typhoon. the rest of my mods are in my sig, the car runs very well, the throttle responce is great. i just wanted more umph with out going real crazy. in addition, i like the stock look of my...
  8. myslo50

    typhoon intake

    i thught eddy made only a performer and a rpm2 ill have to look into it some more
  9. myslo50

    typhoon intake

    is the efi typhoon intake power range idle -5500 or is it 1500-6500 some sites say its idle to 5500. professional products web site says its 1500-6500. who is true? next question is how well will it work with my set up. or should i sell my explorer intake too and buy a better intake. im going...
  10. myslo50

    New T5 short shifter.. Which One???

    i have the steeda tri-ax......love it
  11. myslo50

    2 quick ?

    the rest of my planned combo would be some sort of power adder. hoping a custom turbo setup. but i was looking today at the tfs intakes and their nos kits with the spacer. i was also thinking of going a custom cam from jay allen. but looking mostly at a new intake for now. also an option of a...
  12. myslo50

    2 quick ?

    need to know what the length of stock pushrods are in a 96 explorer motor? was wondering if there is a big flow difference between the explorer upper and lower intake and a tfs track heat upper and lower? i might be looking to upgrade an intake here soon. i just dont want to spend the...
  13. myslo50

    ?

    i planned on keeping the motor the same until it splits........disreguard #3, i was rambling on. as far as what i want with the car, is more power! plus the fact that i want to make everything myself. all i do with the car is take to shows and take it to the track more. im not looking to get...
  14. myslo50

    ?

    need to know a few things about a turbo........................ 1-go with a single t70 and why? 2-go with 2 t3-t4 and why? 3-go with a single t3-t4 and upgrage to a t70 later and why? on the t3 t4, internal or external wastegate, pros and cons how would i route the oil feed/return lines...
  15. myslo50

    1/4 mile times

    i figured that it would be a 12 second car, which is very impressive with what i got. i just need to learn how to drive.........lol.......thanks for the replies, im starting to build a list for a custom turbo setup. now ill never get traction. MyHoFoSho---------you will never get that 347 in...
  16. myslo50

    Um i broke a bolt

    pull the intake off and u might get lucky, there might be enough stud to pull out with a pair of channel locks
  17. myslo50

    1/4 mile times

    25th, post your video at the track
  18. myslo50

    EGR

    i had to hammer mine off, it was a PITA. if u got a new spacer coming than use a chisel and have at it. try using some pb blaster and let it soak. after u get the spacer off DO NOT use a inverted torx socket, i used a pair of vise grips in the center of the stud.........but i would soak the piss...
  19. myslo50

    2 weeks is all it took... kid drivers

    too much power muy guess...........j/k....sorry to see that
  20. myslo50

    1/4 mile times

    i will perfect the launch on dr's...i dont want to buy slicks cause ill have to race with a different group of cars, and i dont want to do that. i like racing with street cars..ill change to a different type of dr's. ill start with the t-lock and go from there. ill havt to perfect something...
Top Bottom
Back
Forums
Menu