Search results

  1. D

    LMAF 30# injectors and eec tuner

    Where's the old forum G?
  2. D

    LMAF 30# injectors and eec tuner

    I've been having my eec tuner forever and am looking to upgrade my combo. I currently have all the bolt ons and am about to switch to a stroker, ported tfs heads, port matched systemax, 75mm t.b., LMAF with 30 #ers.... I'm looking for a transfer fcn for my 90mm LMAF and some info on what I...
  3. D

    95 Stang - Nitrous Install Questions

    You don't need a window switch for a dry kit but it's highly recommended for a wet kit. Need enough air velocity to keep the fuel suspended in the intake tract.
  4. D

    What would cause this?

    I use Taylor spiro pro wires. They're pricey but well worth the money in my opinion. 350ohms/foot is almost the best you can find w/o having to go to 80+$ for a set of better wires.
  5. D

    95 Stang - Nitrous Install Questions

    Don't forget to install a window switch. You don't want to run a wet kit below 2500-3000 rpms because you'll be more susceptible for a nitrous backfire b/c of fuel puddling in the intake (i think that's why). Also it allows you to shut the juice off before you hit the rev limiter. I run an MSD...
  6. D

    Noisy Valvetrain after H/C/I install and I thought I did everything right

    Installing pedestal mount roller rockers is the same as installing the pedestal mount stamped steel ones.YouTube - BadShoeProductions's Channel check out this video it should help.
  7. D

    Noisy Valvetrain after H/C/I install and I thought I did everything right

    Out of curiosity, why didn't you upgrade your rockers while doing all this work? Crane makes a good set of rockers. Anyway, did you install your rockers while on the base circle of the cam? What was your process for installing the rockers. Your cam isn't the problem. To get proper pushrod length...
  8. D

    How much install time for new h\c\i?

    I just did this and it took me about 3 days working about 3-4 hrs a day taking my time. The things that take up most of your time is tool organization. try to keep your toolbox as close as possible not having to walk back and forth to your toolbox. Remember to pick up all your gaskets, fluids...
  9. D

    My upper control arms are flexing and bushings ripped...Good Uppers?

    I've been running my steedas for over 10 years with no probs.
  10. D

    New to the site and mustangs, first upgrades?

    I'm telling you some 3:55's, exhaust, and a supercharger will get you as fast or faster than most n/a guys. Combos change all the time as you'll soon learn. This will get you headed in the right direction. You can add the intakes, throttle bodies,..... as you go. As your car develops you can...
  11. D

    New to the site and mustangs, first upgrades?

    If I were to do it all over again. gears, exhaust, supercharger/turbo.
  12. D

    Convertible guys. Found water in trunk and floor

    Found a few trunk leaks. 1. one rear wing bolt (of no significance) 2. gas fill tube gasket 3. Where the trunk hinge mounts to the body. The major leak. It seems that the sealing compound cracked and allows water to infiltrate through the upper trunk seam. My questions are; Can I remove...
  13. D

    Convertible guys. Found water in trunk and floor

    I have a pretty new top but I'll try to send it to my guy to re check it.. Any ideas on where to look first if the top is not the prob? any notorious seals? I'm going to have to pull out the whole interior and trunk. Any help would be appreciated.
  14. D

    New Engine won't start, HELP!!!!

    First, Take a day or two off. Pull the plugs and wires and let the fuel completely evaporate out of the cylinders. Are you rotating the engine while your finger is over the #1 spark plug hole? Get yourself a remote starter trigger so you can crank the car while you're still under the hood. put...
  15. D

    Why won't my car idle? New 306 build w/ edelbrock performer HCI

    Did you get a maf to match your 24lb injectors? Definately check your timing. You could probably run 16-18 degrees of timing with the aluminum heads. Good luck and keep us posted.
  16. D

    Does eec tuner work with windows vista?

    Looking for a new laptop and they all come with windows vista. Thanks.
  17. D

    My aluminum driveshaft is getting trashed somehow. HELP!!!

    I had the same thing happen to me at the track when my rear control arm broke on me. Every launch/takeoff from a stoplight would force the driveshaft upward into the tunnel creating a groove gouged in the driveshaft.
  18. D

    Still need AC help!!??

    fill it while switch is jumped. I just had to do mine.
  19. D

    head studs while engine in car??

    I've done mine w/o unbolting the engine. If I remember correctly, I think the heater hose or ac lines made it difficult on pass side.
  20. D

    Cylinder full of fuel/ plug not fouled

    How do I run a cylinder balance test?
Top Bottom
Back
Forums
Menu