Search results

  1. rusty428cj

    1966 Mustang Coupe Restomod

    The repair is finished and a little epoxy was brushed on to stop the surface rust on the weld Fitting the shock tower panels Welding finished just need to start grinding
  2. rusty428cj

    1966 Mustang Coupe Restomod

    We had a major set back. Brian lined up the doors but when he went to line up the fenders and hood he found a major problem. A former employee welded the front end on wrong even though he measured and remeasured before welding. There was very little gap on the left door and a large gap on the...
  3. rusty428cj

    1965 Fastback with DSE

    We had a problem with the original fiberglass hood and front valance so we ordered replacements from NPD. The hood required a little work but the front valance fit great and it was a Dynacorn part. The hood had a low spot in the back and the front corners needed a little fiberglass added to...
  4. rusty428cj

    1965 Fastback with DSE

    Two coats of Slick Sand polyester primer
  5. rusty428cj

    1965 Fastback with DSE

    The undercarriage, engine compartment and interior was seam sealed. The extra firewall holes were filled in Epoxy primed Brian is taping the body so we can spray a couple coats of Slick Sand primer
  6. rusty428cj

    1966 Mustang Coupe Restomod

    Brian is welding the rear floor and modifying the inner wheelhouse for more tire clearance. Rear bulkhead panel welded in place Welds ground and interior sanded and ready for SPI epoxy
  7. rusty428cj

    1965 Mustang rust repair

    We are nowhere near finished
  8. rusty428cj

    1966 Mustang Coupe Restomod

    The drip rails were removed and welded Welds ground We still have more work to do inside the car but to stop the surface Brian sanded it down to bare metal I sprayed two coats of SPI black epoxy and it is back in the fab shop
  9. rusty428cj

    1968 DOHC 4.6 Coupe Project

    Brian and I were trying to figure out what we were going to do to cover up all the wires in the trunk and we found out about Mustang to Fear's trunk kit for the coupe. At the time we inquired they only had one made for the Eleanor style taillights. Rich said he was going to make one for the...
  10. rusty428cj

    1965 Mustang rust repair

    Brian welds a little stops and and takes the air hose to it to cool it down.
  11. rusty428cj

    1968 DOHC 4.6 Coupe Project

    I forgot to show this but awhile back Mark Houlahan came by the shop to help us install the Ron Francis wiring harness for the SOHC Mod motor. We are not finished under the hood Brian was helping Mark Takes a lot of wires to run a modern engine Every wire is numbered so you can't...
  12. rusty428cj

    1965 Mustang rust repair

    Yes that is the original roof and we have done it on at least 3 others with the original roof.
  13. rusty428cj

    1965 Mustang rust repair

    Wet sanded with 600 and sprayed three coats of Caramel Bronze metallic yesterday and this morning 3 coats of SPI Universal clear.
  14. rusty428cj

    1965 Mustang rust repair

    Block sanded the body and fixed a few minor imperfections, taped and epoxy primed. The rear wheel wells have not been taped in this photo Epoxy primed
  15. rusty428cj

    Build Thread 1978 Mustang I I

    The body has been block sanded and I sprayed a couple of coats of SPI Turbo urethane primer.
  16. rusty428cj

    Build Thread 1978 Mustang I I

    Two coats of SPI Turbo primer
  17. rusty428cj

    Build Thread 1978 Mustang I I

    I finished the bodywork and sprayed a coat of epoxy to seal it before spraying urethane primer
  18. rusty428cj

    1966 Mustang Coupe Restomod

    The quarter panels, roof, rear deck panel and taillight panel lined up and welded in place
  19. rusty428cj

    Build Thread 1978 Mustang I I

    I painted a few more parts
  20. rusty428cj

    1966 Mustang Coupe Restomod

    Brian has done a lot of work since I last posted The rear frame rails had a little rust and needed to be replaced Test fitting the trunk floor and gas tank Plug welding the trunk drop offs Fitting the rear package tray and sail panels The quarter panels were shaped wrong and had...
View older results
Top Bottom
Back
Forums
Menu