Search results

  1. 9

    bbk fuel pressure gauge wont read pressure?

    to install most fuel pressure gauges you do have to remove the schrader valve as the schrader valve has a stem in it to keep the fuel from entering the gauge.
  2. 9

    need help asap on holley

    The motor is a ..che..che I hate to say it on a ford site, it is a chevy 406 with world 205cc heads. I was told to set the corner idle screws 1.5 turns out. I just sold the truck today But I know the guy so I will probably have to adjust it for him.
  3. 9

    need help asap on holley

    I have a holley on my truck I am trying to sell. I need to fix the carb asap. I have a 3310 750 vac. secondary. It is running very rich. I got on a site to see how to adjust but they will not tell you , you have to buy a book. But the site did say if you adjust the air mixture screws all the...
  4. 9

    Which mass air meter, Granatelli or C&L 76mm?

    I have a 76mm c&l mass air meter but I only have 24 lb. injectors I had to rotate my meter to get it to idle better, but it runs perfect and is very responsive. I absolutely love it and would recommend it. I also have a cold air kit and have no problems... Ricky..
  5. 9

    QUICK help with 76mm mass air and cold air kit

    Yes my cold air is the fender mount. I have heard people say it will not run right like this but I have seen mine and also 2 friends run fine like this. But that does not speak for millions of other cars, every car is different..
  6. 9

    QUICK help with 76mm mass air and cold air kit

    I have a moroso c/a kit and a 76mm c&l mass and I have no problems. The car idles and runs fine, I also have an e cam.
  7. 9

    Champion Fiberglass Products Hood, what do you think?

    There is a hood company in cincy ohio called boss, he is on ebay and makes the cobra r hood. A friend of mine from work just bought one and it looks awesome. The finish on it is perfect and takes hardly any prep work to be ready for paint. Check this guy out..
  8. 9

    Spanked a GTP tonight

    You guys that knock the GTP's shouldn't. My GTP with a 3.4 pulley and k&n ran a 14.17 @ 97 mph 2.2 60' and it is a 4 door. The guys that run slower need to hold second gear out until 5800-6000 rpm if not it will shift very early. Also do not manually pull it down to 1st gear it will shift at...
  9. 9

    Fuel Injector Question

    93-97 LT1 camaros had 24's (Iknow is said camaro SORRY) That is what I put in my fox, I like them better because they have 6 holes in the bottom instead of 4 but no big deal, and they were free.
  10. 9

    thumbs up for summit exhaust

    I bought a Dr. Gas X-pipe and it did not fit for *****, I had to cut and reweld my own angles and put the driver side pipe on the pass and pass side on the driver side. I have heard the summit fully welded mufflers on a 90 fox w/331 in it and it sounded bad as hell. It sounded like the car was...
  11. 9

    has anyone had any toruble installing a Dr. Gas x-pipe with BBK longtubes.

    my front tubes were labled wrong also. I had to put the pass. side on the drivers side and the pass. side I had to cut there so called 45 degree bend and weld my own angle in. Now it fits great. I just have to wait two weeks for my mufflers to come in.. As many of these as Dr. Gas makes they...
  12. 9

    Anyone know what might be the best Jet-ski forum?

    pwctoday/forums that is the best pwc forum site I have been on. Do a search on pwc forums and you should find it.
  13. 9

    has anyone had any toruble installing a Dr. Gas x-pipe with BBK longtubes.

    I bought a Dr. Gas X-pipe for my BBK longtubes and tried to install it, and there was no way in hell it was going to fit. So I call up Dr. Gas and ask them about it and the guy says you have to trim fit the front pipes off of the header. So I did this and it only made it worse. I cut little bit...
  14. 9

    GM, Nissan, and Toyota, Oh My? Possible Merger?

    At the plant I work at we make several Toyota interiors. I do not think toyota would merge. They gave my company 2 million dollars to setup a production line to run parts if the other company that competes against us went out of bussiness. That way they would still be able to produce enough...
  15. 9

    BBK Long tube clearance problems

    I installed my BBk 1 3/4 lt last week and no problems anywhere. They look great but waiting on an x-pipe.
  16. 9

    does ford stamp #'s on rods from factory

    I have a 90 lx and I just dropped the oil pan while in the car, I looked at my rods and they are all numbered. I know if you have your rods reconditioned they will stamp them to keep the caps from being mixed up.
  17. 9

    1992 FOX oil pan gasket replacement

    you have to remove the rack and pinion, I just started on mine tonight. I am changing my oil pan due to it being smashed up a little.. I am just wondering about the sensor in the pan, my new pan does not have it. Will this make the oil light come on or not?..
  18. 9

    I saw a crazy fast Firebird last night at Kil-Kare

    I think it was a V-Tech LOL, It was amazingly fast and put off a lot of heat. They also had a jet semi it ran in the 5 sec range 1/8 mile. You can probably see picture @ Kilkareraceway.com. go to the drag racing link. It was called The Night Of Fire.. They also had a School Bus and a radio...
  19. 9

    I saw a crazy fast Firebird last night at Kil-Kare

    I saw a Firebird at Kil-Kare run an amazing run in the 1/8th mile last night, 3.94@207mph I also saw a station wagon from Sinclair community college that runs the 1/4 at 179 mph also seen a Astro van run side to side with the grocery getter. OOPs I forgot to mention the Firebird had a JET...
  20. 9

    are long tubes headers hard to put on?

    I just installed my BBK 1 3/4 in. LT and I had to raise pass. side about 4 inches and it slid right in. I tried to do it not raising the motor and it was NOT going to happen. Drivers side I had to remove the steering shaft and it went in without raising the motor.
Top Bottom
Back
Forums
Menu