Search results

  1. 4

    shock/strut install pics

    Just remove and replace in the opposite order in which you removed the parts, it is pretty basic. BTW don't forget to get an alignment when you are done. Dwayne
  2. 4

    ? about Fr500 steering wheel

    The FR500 wheel is a stocker that has been wrapped with padded leather, this is what makes it thicker and feels much better. I like it a lot. Dwayne
  3. 4

    clutch slip noise ???

    Why do so many people say the tranny is weak? I have been banging gears on mine for 11 years with absolutly zero problems. Of course I have been driving a stick for the better part of 30 years now and know how to use a manual and not ABUSE a manual. And yes I think it is the serp belt...
  4. 4

    Pinging that I can't solve.

    It is probably just a case of carbon in the combustion chamber raising the compression. The only way I know of positivly removing 110000 miles of buildup is removing the heads, cleaning the pistons and having the heads rebuilt. Dwayne
  5. 4

    Calling Randy S

    I guess it would be easier for all if I just went to my local dealer and got them there. Greatly appreciate your help Dwayne
  6. 4

    help with miss?

    Clean MAF, Clean/replace air filter,Check/replace plugs, injector cleaner, seafoam or similar. 95% of the time just basic tune up items will take care of your problem. Dwayne
  7. 4

    Calling Randy S

    Thank you Randy, shoot me a price mailed to 87124 please and I can paypal you. Dwayne
  8. 4

    Calling Randy S

    I have a leak in my power steering system, it is coming from the pressure line to pump union. Are there replaceable seals in there and are you able to procure them? Thanks, Dwayne
  9. 4

    How to drill/screw drag wheels?

    are they slipping on the rim? if not why bother. Dwayne
  10. 4

    $1300 and a slow 98 GT Conv....Advice?

    I honestly believe that for $1300 you would be better off just installing the PI cams and intake, that is where most of the power gain is in the swap. Now I said MOST not all but a good 80% that will run $300 or less leaving you with a cool grand to invest in gears and a 100 shot to really wake...
  11. 4

    $1300 and a slow 98 GT Conv....Advice?

    I would install the PI cams and PI intake, that will run you less than $300 then gears and a 100 shot to eat the remaining 1k just pray you don't have a backfire and you will be smokin' Dwayne
  12. 4

    More EGR BS

    try removing the vac line to the egr valve, if you are still flowing exaust gass into the motor you will know because your idle will be poor. Try taking the valve off and cleaning the carbon out of it to see if that helps. The sensor is known to go bad so therre is a good chance that is your...
  13. 4

    Anything else? Re: Replacing manual transmission with automatic in 2001 Mustang GT

    Just one Q why? You refer to gas milage well manual trans are more efficent than auto's. Just my preference I know but there you go. Dwayne
  14. 4

    Where is the clutch adjustment on a 97?

    just stick your left big toe under the clutch pedal and lift till it stops moving, if you hear a clik it needed adjusting if not it didnt. Dwayne
  15. 4

    Oil leaking

    I guess that is the last time you try bump starting a car. I have never herd of a motor fragging like that before how strange. Dwayne
  16. 4

    97GT still pings like a bastard

    clean your maf and change the air filter. Failing that get your codes read and go from there. Dwayne
  17. 4

    low gas light question

    no low light here. Also when the tank is full or empty the pickup is in the same place, therefor if there is crap in the tank it will get sucked up regardless of the amount of fuel in the tank. Dwayne
  18. 4

    How to shed 100lbs?

    no fries or biggi sizing your fast food, lay off the beer, pizza, or anything else that will add weight get plenty of exersize. Free weight reduction and could even save you some money. Dwayne
  19. 4

    crank bolt pulley

    TTY bolt? I must question that call. It is a standard 10.8 hardness 12mm x 1.5 thread pitch bolt. As far as removing it put it in 1st gear firmly apply the e brake and chock the wheels. Just keep turning the breaker bar until it lets go. Sometimes it is helpful to strike the bar with a hammer...
  20. 4

    Compress Front Caliper Pistons

    Please remember it is good policy to replace your fluid every 2 years to remove moisture that break fluid loves so much. This will prevent corrosion in the break system. No I know most people don't but there you go.... Dwayne
Top Bottom
Back
Forums
Menu