Search results

  1. O

    And why can't Ford figure out how to do this?

    Heh, Walter and I will argue a lot about a Watts vs PHB. The Watts is technically better, but I not the biggest fan of the packaging of a lot of the Watts links, they tend to be a little bulky and I would like the see the arms be a bit longer. Replacing the PHB on our cars makes a huge...
  2. O

    Custom Tune Gremlins!!

    The MPG is an obvious sign that something is amiss. Call brenspeed, but I would also try resetting the ECU. Dan
  3. O

    And why can't Ford figure out how to do this?

    An IRS would be awesome, but you can make a stick axle perform very well (very close to IRS levels). The main issue with our rear suspension is the very short upper control arm, it's far too short for proper geometry, which is one of the main causes for our wheel hop issues. A torque arm setup...
  4. O

    next mod... opinions...

    The stage 3 Roush is putting down about 380 HP, they have a better suspension (for corners anyway, better matched shock/struts, springs and sway bars), and better tires. To beat a stage three you're going to need some help, mainly in the power and tires department. The off-road H isn't a bad...
  5. O

    What type of gauges should I run??

    That's the gauge pod I want, they have a version with an attachment point for a raptor shift light. Dan
  6. O

    What type of gauges should I run??

    I have the IUP (that includes all the extra gauges), but the temp gauge is way too vague and the oil gauge is a dummy gauge that comes on at 6psi I believe. I could do without the water temp if something else was more useful, but I don't find A/F that useful on an NA car, unless you're pulling...
  7. O

    What type of gauges should I run??

    I agree for a boosted car get A/F fuel pressure and boost. I'm probably going to keep my car NA, so I'm thinking I'll go with water temp, oil temp, and oil pressure. I hate not having an oil pressure and oil temp gauge. Dan
  8. O

    Saleen (stoptech) 14" brake kit clear the 18" TQs?

    Walter, give stoptech a call. They have the templates, but they are also pretty good at keeping track of which more popular wheels fit. It looks like increased backspacing on these wheels kills brake clearance, it was never this much of a problem with the SN95 BBKs. Dan
  9. O

    Shelby Twist Hood Pins?

    They use double sided tape, if I recall. If they were bolted the bolts would go through the hood anyway... Dan
  10. O

    Rattle from Right Vent

    my cabin light rattles sometimes...
  11. O

    Opinions on SPC C/C plates

    I would probably just suggest camber bolts, but if you really want CC plates, I would go with Maximum Motorsports. Maximum Motorsports :: The Leader In Mustang Performance Suspension
  12. O

    SuperShaker done. The Wolf is ready.

    I had the same reaction...
  13. O

    SuperShaker done. The Wolf is ready.

    That graph really makes me want one. I dunno if I would up the boost on it any, those are awesome power numbers and you can do a lot to up the power without a pulley swap (though the pulley swap is the cheapest:D). I'd just start to worry about durability, since my car is my DD. Turned out...
  14. O

    400 HP AT THE WHEELS ALL MOTOR,"YES"!!

    The difference between the LT1 and the LS1 power levels is the LS1 has a much better head/intake package. The difference between the ls1 and the 3V is 65ci. The differences between the LSx and mod motors are many, any direct comparison is fundamentally flawed. Dan
  15. O

    The UPS MAN IS HERE !!!!! HE'S HERE !!!!!!

    Ahhem, :worthlesb Congrats though, nothing more exciting that 100+ HP in a box!
  16. O

    Comp Cams 127500 Cams with Blow By Racing Lockouts

    Definitely sounds better with a little heat in it. Kooks LT with their catted X-pipe and loud mouths? No wonder, I bet that's loud as hell. Dan
  17. O

    Comp Cams 127500 Cams with Blow By Racing Lockouts

    Not cold, but cool. Actually 45 out today, damn this global warming...
  18. O

    Comp Cams 127500 Cams with Blow By Racing Lockouts

    Bah, you were just trying to outdo me again! I'm looking forward to the new clip, I know how bad these cars can get when cold. Mind hates the cold, good thing I live in Texas, heh. Dan
  19. O

    Do I have keyless entry?

    Did you buy it from a Ford dealer? If so I'd go there and demand they give me a fob for free. Dan