Search results

  1. Jozey

    3.08 to 4.10 question

    i love 4.10's for n/a.i wouldnt go with anything else.just my .2
  2. Jozey

    tryin to add a supercharger

    or you can just sell me the blower and then you wont have to worry about it.:p im just kinding
  3. Jozey

    AFR heads

    i pretty sure you can with a stock cam but you always want to check piston to valve clearence when going with a bigger valve and or cam
  4. Jozey

    uppers and lowers

    what about south sides for street use?
  5. Jozey

    AFR 185's and valve clearance.

    just take an old lifter and pull the spring out of it.then put some small washers in the lifter and put the top back on and wolla soild lifter.just dont run the motor like that.you should be fine on the clearance.im running DSS pro lite pistons with a F303 and no problems
  6. Jozey

    f303 cam help

    if you are running stock heads it will not work.you will have to fly cut your pistons to fit the lift of that cam.if you have stock heads a E-303 or B303 will work good for you.
  7. Jozey

    Intake

    you can also consider the Holley systemax intake.i went from a trick flow track heat to this and i ilke it better and i'm n/a
  8. Jozey

    e-cam timming

    you could call a ford racing dealer and they should tell you
  9. Jozey

    M/T drag radial question

    damn hook me up on that deal also
  10. Jozey

    Mac Pro-Chamber

    i would like to hear what a pro chamber sound like.
  11. Jozey

    uppers and lowers

    i have seen the blue oval one and the UPR one.geuss i have to see what i can afford now.thanks for the info ya'll
  12. Jozey

    Nitto 555r Drag Radial

    nitto d/r's=crap
  13. Jozey

    uppers and lowers

    what are a good brand of control arms to go with for street and track use?nothing to much.any info will be helpfull.
  14. Jozey

    Throttle body help

    yes you will need gaskets.you can buy the 70mm egr spacer or if you know of anyone that does machining you can bore the stock one to about 73mm or so.thats what i did and it will save you 50 bux or so
  15. Jozey

    AFR 185's and Rockers???

    what size push rods are you using?i have the 185's and 1.6 ford racing rockers,i dont have your problem but i need longer pushrods.if you can give some info that would be awsome.
  16. Jozey

    My Big Block Fox Finished Product...56k Warning

    clean install,looks stock from the outside
  17. Jozey

    The thread of the nicest FOXES!

    they are hart racing 3peice wheels,18x9 in front and 18x10 in rear.im running a 265-35 in front,275-40 in rear and i think i can fit a 305 up there.maybe.thanks for the props.:D
  18. Jozey

    The thread of the nicest FOXES!

    just got her up and running
  19. Jozey

    T5 Question

    The input shaft is longer.My freind got one and matched it up to his T-5 from a fox body and saw that the input shaft is longer.
  20. Jozey

    First run at the track

    I had that problem once and it was the bushings but i had a bigger throttle body so I put that on
View older results
Top Bottom
Back
Forums
Menu