Search results

  1. TheSalad

    Tranny/Clutch Problem, PLEASE HELP!

    I emailed Mustang Warehouse and they said the bolts I have are too long, and I should get bolts that fit...what an awesome answer. I am thinking of on monday going to a nut and bolt place and buying every 8mm bolt there, and seeing what fits, any other ideas?
  2. TheSalad

    Tranny/Clutch Problem, PLEASE HELP!

    Today we got the clutch, flywheel and all the stuff out. I broke the clutch disc in more than one spot, and also, the pressure plate side was ripped off the clutch, and "melted" to the pressure plate, I did it quite well. There is one problem...this is the flywheel I bought for...
  3. TheSalad

    L/T/Exhaust question...

    All right, I have Mac L/T headers, ,and am really tired of the work I have to go through to get the tranny out. I have heard that Flowtech headers let the tranny drop, is that true? On Summit, they have these.. headers for only $230 or so. The picture on the site, shows a ball and socket...
  4. TheSalad

    Tranny/Clutch Problem, PLEASE HELP!

    I loosened them up really well :) Should have saved a headache and just taking them out...they still got in the way :(
  5. TheSalad

    Tranny/Clutch Problem, PLEASE HELP!

    Well, tonight, with the help of two other buddies, we got the tranny out, and what can I say, what a nightmare! It took forever. I had just a minute to get a glimpse at the clutch plate through the pressure plate, it is destroyed :) So, tomorrow, I will work on getting the stuff off, then back...
  6. TheSalad

    Tranny/Clutch Problem, PLEASE HELP!

    All right, so today I didnt have any help, but I got the driveshaft off, as well as all but the top two tranny/engine bolts. I didnt want to take them out without anyone there to help lower the tranny, so that is tomorrow nights work. I will get some pictures of the mess when I get the tranny...
  7. TheSalad

    Tranny/Clutch Problem, PLEASE HELP!

    Well, I took off the k-member myself..well, it well to the floor by itself ;) I loosened up the l/t a considerable amount, I hope it is enough or I will kill myself, and removed the starter(getting a new one) Afterwards, I cleaned off the k-member, and had a neighbor help with the jacks to...
  8. TheSalad

    Tranny/Clutch Problem, PLEASE HELP!

    I would be a little worried about putting the tranny and stuff back together alone, but I should have some help by then, should make it a little easier on me. But I do plan to drop the k-member solo :) Thats today, I'll post pics later :)
  9. TheSalad

    Tranny/Clutch Problem, PLEASE HELP!

    Yeah, the pilot bearing, not looking forward to getting that out. I am using a new flywheel. And, the reason I am not oulling the motor, is that I dont have the tools for that, the motor lift, or the motor stand. I justwant this done. When I get a new motor, I will pull it ;)
  10. TheSalad

    Tranny/Clutch Problem, PLEASE HELP!

    Okay, so this morning, went out to Sears and got the Torx set, and came home, and started up on taking the front suspension apart. So much fun. I fnished but driver and passenger side, just need to take off the steering linkage stuff, and then hit the k-member, I am excited. Here are some...
  11. TheSalad

    Tranny/Clutch Problem, PLEASE HELP!

    I guess it really wouldnt been to hard to put the motor mounts back on, as well as the k-member to work on the tranny. I am thinking I will do that. Exactly what kind of bit am I going to need to get the ABS sensor out? It says E8 which is external, but all the pictures I have seen, the bolt...
  12. TheSalad

    Tranny/Clutch Problem, PLEASE HELP!

    Yeah, I have a crappy MAC short throw shifter. I wish I would have paid up to get the Steeda or another one.. Question.. I am dropping the K-Member, and will only have the motor on a floor jack when I take off the tranny too...when I get the flywheel on and off, will I need to support the...
  13. TheSalad

    Tranny/Clutch Problem, PLEASE HELP!

    I decided to drop the K-Member, I will get started on it Monday. I will take lots of pictures for you all, I hope! Thanks for all the help. Will there be a problem of taking the flywheel and junk off the motor, when the K-member is out? What kind of support will I need?
  14. TheSalad

    Tranny/Clutch Problem, PLEASE HELP!

    I am having some issues getting to the rear four passenger side header bolts, any ideas? I am using some stubby gear wrenches, and extensions and swivels. I can actually get to the second to last rear bolts, but they are torqued down to much to break loose with the stubby... Also, I have no...
  15. TheSalad

    Which Tremec Tranny?(have part number)

    It isnt a stock trransmission, my stock one went out 2 1/2 years ago. Thanks though!
  16. TheSalad

    Which Tremec Tranny?(have part number)

    bumpy
  17. TheSalad

    Tranny/Clutch Problem, PLEASE HELP!

    Thanks for all the support, I will need it! I have the mid-pipe out, and next up is the driveshaft, then I can get to the hard part. I only had 2 hours to work on it tonight, and I spent forever trying to get the clutch cable off. For som reason, when I pull rearward on the pedal, it doesnt...
  18. TheSalad

    Which Tremec Tranny?(have part number)

    Hey, I am getting my clutch done, and wanted to know what tremec tranny was put in, The number on the tag is YR33 7003AA F0102 TSET 1386AC 0872 Thanks! What tranny is this?
View older results
Top Bottom
Back
Forums
Menu