Search results

  1. 4.6andSlicks

    Low RPM miss? No codes showing...

    Been driving it for a couple months now and the issue seems to be solved with the O2 sensors. (front 2. don't bother with the back)
  2. 4.6andSlicks

    Anyone have lowering springs w/out C/C plates?

    H&R Sports, 1.5' drop, no C/C Plates and had it aligned. The guy told me he got it in but it was close to the max of adjustment. Close is OK with me.
  3. 4.6andSlicks

    AC blowing warm air

    I believe this is usually caused by low pressure. The gauge set you hook up is to measure pressure while the compressor is running. If you add refrigerant and then wait, and the length of run time of the compressor becomes longer, you're definitely low on refrigerant. I don't see you're...
  4. 4.6andSlicks

    You know you are...

    ...and I thought I was the only one with the CJ Pony Parts catolog in the bathroom.
  5. 4.6andSlicks

    What's the best shifter???

    +1 for MGW. Man, that thing has a tight pattern. No more missing 3rd.
  6. 4.6andSlicks

    Transmission Problem Please Help.....

    I actually put a return spring from the end of the fork to the transmission support. I had to punch a hole in the back side of the sheet metal fork cover but it pulls the TB off the surface of the pressure plate, stops the noise and preserves the bearing. The OEM is a bad design IMO. I wish I...
  7. 4.6andSlicks

    what gears are in a 2001 Cobra?

    Lovin' my 4.10s
  8. 4.6andSlicks

    Can I powder coat my valve covers & upper intake?

    TTT Anyone?
  9. 4.6andSlicks

    Can I powder coat my valve covers & upper intake?

    01 Cobra 32 valve N/A. Are the valve covers metal? Also, is my upper intake metal or plastic? I'd like to powder coat them the same color.
  10. 4.6andSlicks

    Low RPM miss? No codes showing...

    :shrug: Thanks but I think either you missed the point of the thread or I'm misunderstanding your post.
  11. 4.6andSlicks

    Low RPM miss? No codes showing...

    Well, I installed the new O2 sensors and got to drive the car twice before the New England snow and salt trucks parked the car until further notice. It seemed to do the trick but I can't really tell without a few days to drive it. I'll post again when I'm sure.
  12. 4.6andSlicks

    Rear End Vibration!?

    I also had FRPP 4.10's (w/bearings) professional installed in a mustang with original 3.73's by a trusted speed shop in the area. I had the same vibration as described. It almost sounds like a bad bearing. I took it back to the shop and the tech also thought it sounded like a bearing...
  13. 4.6andSlicks

    Is my Predator unmarried?

    Look for the section that says "Last Tune Installed". It should say something like "Stock Tune" or "Original" or something like that indicating the previous owner last action was to put his original tune back in the car.
  14. 4.6andSlicks

    Low RPM miss? No codes showing...

    That's good enough for me. I'm on my way to the parts store tomorrow. Thanks
  15. 4.6andSlicks

    Low RPM miss? No codes showing...

    I'll be waiting because this is driving me crazy. I'm going to try the same thing but I won't get to it for a few weeks. Let me know how you make out. Thanks
  16. 4.6andSlicks

    What quadrant and firewall adjuster to go with?

    I got this setup and absolutely agree. It has the same radius as stock so it won't change you pedal at all except for one thing. When you remove the old crap, you remove the clutch pedal return spring also. I modified the sheet metal clutch fork cover underneath and added a return spring. Now...
  17. 4.6andSlicks

    Whining sound

    Get a stethoscope. They're fantastic for finding the source of noises like this
  18. 4.6andSlicks

    A few more pics of the Mach!!!

    You just made my October 08 desk calendar
  19. 4.6andSlicks

    Are all my O2 sensors the same

    I'm troubleshooting an issue and would like to swap my upstream O2 sensors with my downstream. I'm running MIL eliminators and their shut off anyway through my tuner. Any difference in the O2's ??
  20. 4.6andSlicks

    I changed my fuel filter. What a PITA

    What the heck was Ford thinking when they put the fuel filter above the IRS. There's so much ***** in the way, I had to get the hoses off with one hand with gas running down my arm. The next time I pay someone. It took me a freakin' hour with getting the car in the air and all.
Top Bottom
Back
Forums
Menu