Search results

  1. 4.6andSlicks

    HELP!!!!!!!!!!!!!!!! wheel loose

    I would jack it up, grab the wheel top and bottom and see how much movement you get that way (Ball Joints, loose strut mount bolts maybe). Grab the wheel left side and right side and see how much movement you get that way (Tie rod ends or rack) If you can get someone else to do those...
  2. 4.6andSlicks

    HELP!!!!!!!!!!!!!!!! wheel loose

    Is it the whole spindle that moves or is the wheel moving on the spindle?
  3. 4.6andSlicks

    Alignment with bumpsteer kit

    Just did a Steeda bumpsteer kit this past Saturday using a bumpsteer gauge. I have an '01 Cobra with H&R sports dropping it about 1.5". I used a level to set the camber as close to stock as I could, but at the new "lowered" position. If you're just trying to get rid of bumpsteer, you won't need...
  4. 4.6andSlicks

    HELP!!!!!!!!!!!!!!!! wheel loose

    So the hub is moving with the wheel when you shake it? Does it move up and down or side to side? I'd get a look behind it. Could be bad wheel bearings (you'd hear those big time particularly when cornering). Could be ball joints (they wouldn't make to much noise). Are the bolts at the base of...
  5. 4.6andSlicks

    another accident thread :(

    That sucks. I'm going to go with fixable though.
  6. 4.6andSlicks

    Unexpected Findings, Steeda Bumpsteer Kit

    Will you be using a bumpsteer gauge? I'd be curious at the results you get.
  7. 4.6andSlicks

    Unexpected Findings, Steeda Bumpsteer Kit

    Finally got my Steeda Bumpsteer kit installed useing a bumpsteer gauge and to my surprise, found the following: Adding all the spacers above the tie rod end, made the bumpsteer worse than stock. I ended up with: 1ea the smallest space + 1ea the next size up. Everyting else below the tie...
  8. 4.6andSlicks

    My Computerized BumpSteer Gauge (pic)

    It's called Microsoft screw two dial indicators to a chunk of wood and attach to the top of an old PC to hold it in place......v2.0. :rlaugh:
  9. 4.6andSlicks

    My Computerized BumpSteer Gauge (pic)

    Don't know what to do with that old computer? :)
  10. 4.6andSlicks

    Video of my car for you guys.....

    Nice ride. What do you have for a front bumper cover.
  11. 4.6andSlicks

    4.10??? 3.73??? BULLITT

    Once it comes off the jack stands gettin' the H&R springs and Tokico shocks, it heads for the shop to get 4.10's. I only use the car for fun on the weekends in the nice weather so I don't much care about the high rpm's on the highway.
  12. 4.6andSlicks

    E85 conversion

    No E85 stations here in Connecticut :nonono:
  13. 4.6andSlicks

    4.10??? 3.73??? BULLITT

    Here's some calculations I did to make my decision on my '01 Cobra. Not sure if the Bullitt comes with the TR3650 trans. .....................................3.27s........3.73s..........4.10s 4th gear@40 mph........1700 ..........2040.......... 2125 ...............@30 mph...
  14. 4.6andSlicks

    How To Pass Inspection

    No Cats? How do they miss the smell? :shrug:
  15. 4.6andSlicks

    IAC

    I bought the one made out of gasket material off of ebay. The first time I put it on, I didn't have an inch/lb torque wrench available and I did hear a hiss (more of a whistle). I removed it and put some silicone sealant on my finger and kinda rubbed it in to the surface leaving absolutely no...
  16. 4.6andSlicks

    I need a pic of your car....

    No body?
  17. 4.6andSlicks

    I need a pic of your car....

    if it's a 1999 -2004 silver hard top with black GT strips, say 10". I wanna see what my car would look like with them. I have an '01 Cobra.
  18. 4.6andSlicks

    wheel spacer questions

    It's not all about the lugs and I said the same thing when I bought mine and here's what happened. I bought the cheap ones and they were hubcentric but the centers where it met my axle was a couple thousanths to small and wouldn't go on the axle so I had to carefully and equally remove that...
  19. 4.6andSlicks

    Anyone using GlowShift gauges?

    Thanks William. I'm hearing good things about them. Do you have any pics?
  20. 4.6andSlicks

    Steeda bumpsteer tie rod end ?

    No body? No comments? There's got to be 10's of thousands of these out there.
Top Bottom
Back
Forums
Menu