Search results

  1. Venom_Nitrous

    Dyno shops in Georgia???

    I just about fell over laughing when I read the title. Sorry to laugh but DUH! :doh: :lol:
  2. Venom_Nitrous

    to focus or boost apump

    I made 340 rwhp and 395 rwtq just fine with the stocker. held an 11.5:1 afr.
  3. Venom_Nitrous

    Will this Tire fit?

    Those tires run very wide. I have 275/50/15 and they bulge a bit on a 10 inch rim. Maybe a 9" would be a good idea for you.
  4. Venom_Nitrous

    Dynoed: what's with my A/F grapth

    My guess, and only that, is that the dyno operator didn't get on the throttle 100% until the afr started to go down around 3700. It looks like it is in open loop before that and it is trying to make it stoich (sp?). The cats may be throwing off the actual afr if he used a sniffer in the tail...
  5. Venom_Nitrous

    Windshield Replacement

    A ford replacement will be 600-700. If you ever get a chip, take it and get it repaired right away. The ins. company will pick up the whole tab w/o a deductible. They would rather pay $40 for a repair rather than 400 for a new one 2 months later. The ins. company will pay for a new on also...
  6. Venom_Nitrous

    Nitrous Problems with Diablo 2 min. after tune!! :0

    No, the o2 was fine the first time. after it stalled and I restarted is when it quit reading all together. I had to dri ve it home 177 miles and it never worked.
  7. Venom_Nitrous

    Nitrous Problems with Diablo 2 min. after tune!! :0

    I went and got my car tuned on the dynojet and it ran just fine on the dyno, and then the dude flashed the chip (delta flip-chip) and I was on my way. I turned it to the nitrous tune and got to 3500 rpm in 3rd gear and hit the nitrous. I felt a good sized surge in power and then at about 4500...
  8. Venom_Nitrous

    can i run a 100 shot with a stock tune/computer?

    I did for 2 runs on mine and I was ****tin' bricks the whole like 10 seconds. They were just test runs on the strret.
  9. Venom_Nitrous

    Rear Axle Leak

    Use JB weld to fill the seal between the axle tube and diff housing or weld it.
  10. Venom_Nitrous

    Anyone running M/T ET Street RADIALS?

    Yes sir I am running stock rear. Also I have the stock shocks and dampers. It is a MEAN MEAN combo - the springs and shocks.
  11. Venom_Nitrous

    Anyone running M/T ET Street RADIALS?

    I have never been to the track on them. On the street with eibach drag-launch springs, I can launch at 5000 with an quick cluch engagement and not even hear a chirp. I pulled .96 G's on my D-pic guage.
  12. Venom_Nitrous

    Anyone running M/T ET Street RADIALS?

    I have the 275/50/15 on my car and they hook like you can't imagine. My CF DF clutch slips before they do. They are BAD in the rain but not unusuable. If there is water on the road, no more than 40 mph. It will just float and fishtail. I have only had my tires for 300 miles and yesterday I...
  13. Venom_Nitrous

    Nitrous Fuel Pressure Problems

    Why is it that I can't operate the nitrous unless the fuel guage is at least 3/4 full? Does it starve the pump if it isn't full enough? I assume that when the guage reads 3/4 the tank is actually about 1/2 full. This makes me very angry. And also, would adding a bottle of NOS Racing formula...
  14. Venom_Nitrous

    Smallest rim that will fit 99-04 Mustang?

    for 15x10 welds you need a 6.5" BS and no spacer for 15x8 welds you need a 5.5" BS with no spacer (both rear) for 15x3.5 skinnies you need a 7/16 spacer, 3" studs and only 1 BS is available. Remember to get shank style lugs
  15. Venom_Nitrous

    QUICK QUICK OIL QUESTION--00 GT

    my 2000 calls for 10w30. Why :shrug:
  16. Venom_Nitrous

    Racing Fuel

    same question here. I live in an area that has a zero availability of premium gas and I want a supercharger. Can I fill with regular and mix in the right amount of UNLEADED race fuel that is 114 octane to give me a 92-93 mix? I have to drive 47 miles to fill premium.
  17. Venom_Nitrous

    Are There Any Drag Launch Springs That Will Lower Your Car

    I will get you a pic of my eibach's soon. It did lower it about an inch in front and 3/4 in back.
  18. Venom_Nitrous

    9004 or 9007?

    9004 has the same base but I believe it is a single filament for separate high/low bulbs. A 9007 is dual filament for high/low beams in one bulb. You want a 9007.