Search results

  1. J

    3.73 or Exhaust?

    i was quoted mid 200's for used gears installed, its usually 150-200 for the install. Just remember if you go supercharged the gt doesnt have a forged bottom end like the 03 cobra so you shouldnt run more than 8 or 9lbs of boost on the stock engine internals. The cobra also has a 6 speed which...
  2. J

    Crown Vic Police Package Motor

    what year, ford starting using pi heads on the stang 99+ im not sure about the crown vic? and I think the horsepower was lower than on the mustang 4.6.
  3. J

    Keyless Entry Probs

    yes you put the key in the ignition and turn the car on and off about 7 times rather quickly, after the 7th time the locks should lock and unlock, than push any key on the remote.
  4. J

    Tire Sizes and Issues...

    I also have the yokohamas and I am not impressed, terrible wet traction, dry traction is so so. I think why he said not to go bigger than 255 in the front is because anything bigger will cause the car to pull at every little bump in the road. I went 275/35/18 all around and it pulls like a mo...
  5. J

    Speed Limiter/Governer

    Ive had my 99 up to 145-150 , it came with the 17's no governor.
  6. J

    New Hawk Pads Are Squealing and its driving me nutts!!!!

    i have them and they squek a little bit but not too bad, I'm pretty sure I installed them correctly, Ive heard of others saying they squell too so i guess its normal but they stop good. oem pads shouldnt squell
  7. J

    HPM megabite Jrs LCA's Are they any good

    sounds like a regular price to me, im not sure if theyre good though, but havent heard anything bad
  8. J

    Track Times..why so slow?

    running a full tank of gas will add a lot of weight , try using 1/8 a tank instead, and I hear the stock mustang wing will slow you donw in the 1/4 by 1mph so it doesnt surprise me the r wing would be 2mph.
  9. J

    ATTENTION, All exhaust pro's I need a recommendation...

    why not weld in some cats? Cheaper than replacing exhaust components
  10. J

    functional side scoops?

    you would have to cut a hole underneath the side scoops and run air ducts back to the brakes(like z06's have)
  11. J

    SOHC to DOHC swap

    :rlaugh: :rlaugh: :rlaugh: :rlaugh:
  12. J

    Magnaflow Magnapacks installed, next???

    I just ordered the upr x pipe to go with my magnaflow catback(not the packs). At 144 shipped it was a bargain and I hear it gives good performance gains and sits a little higher than most x pipes.
  13. J

    WHAT WILL A KB GT WITH FOLLOWING MODS RUN?

    I would think that setup would get you into mid to low 12's. Probably a little under 400rwhp. Faster than stock ss, z06, or 03+cobras, however if these cars are modified than differant results(ex. a 03 cobra with a differant blower pulley only can probably get into the low 12's, slap on a...
  14. J

    RPM Sticking...

    and you have the stock tb? kind of sounds like its getting stuck, but since you had the head swap and than it started makes me think its related to that. Is it possible you need a tune?
  15. J

    Please help, no knowledge about breaking in engines or 17x10.5 rear w/radials

    and youre sure they didnt replace your engine with an explorer engine or something?
  16. J

    Eibach Pro-Kit Springs question

    nope you wont have a problem, you wouldnt even have a problem with sportlines and 18's. If I were you id make sure to get some c/c plates at the same time as you install your springs, some say you dont need them with the pro kit drop , but when I get my springs(pro kit or sportlines cant...
  17. J

    Where can I find MACH1/BULLITT gauges?

    junkyard? I havent seen them for sale elsewhere, I thought I heard something about the mach gauges not being a direct swap(maybe wiring harness is differant?)
  18. J

    Low Idle and Quick Stall out

    I agree its the iac, I paid 51.99 at napa, try cleaning it with some carb cleaner first, if it helps you know its the iac and can go ahead and replace because its gonna mess up again eventually. Its located on the front of the upper intake plenum, it looks like a cylinder and has one wire and...
  19. J

    HELP PLEASE!

    how did you drench the thing in carb cleaner if you cant find it? on my 99 its attached to the upper intake plenum, right on the front of it, it has one wire running into it and one hose. Do a search on here if you cant find it there was a pic posted with it labeled. Definately sounds like a...
  20. J

    Stupid sound (Neer tire)

    screw them go elsewhere, how many miles have you put on your car since the pads were changed? 800 for injectors? you could have went with some better ones for less than half
View older results
Top Bottom
Back
Forums
Menu