Search results

  1. pirotec354

    MSD Boost Timing Master help

    So i just recently installed my msd btm but im not really sure what to set the boost start point at or what i should set the retard knob at( 1, 2 , or 3). My cam timing isnt advanced or retarded at all either. im currently running 15-17 psi and just wondering what the best set up with this would...
  2. pirotec354

    Congratulations turbogt, our January 2009 SN of the Month Winner!

    Thats a clean ride man, nice:nice: I got a 94 crystal white cobra with fr500's but there anthracite not chrome. But you got me beat on how clean yours is:(
  3. pirotec354

    Vibration at and above 80

    Ok so Ive had a vibration coming from the rearend I believe ever since i bought my 94 cobra about a year ago. I never really thought much about it since i dont really drive over 80 too much except for at the track. Once i reach 80 the vibration starts and it souds like its coming from the rear...
  4. pirotec354

    Window problems - Help

    I had this same problem. If you can hear the regulator running but the window doesnt move, thats a pretty good indication that the bushings inside of the regulator are bad. Mine were, so instead of spending good money on a new regulator I spent four dollars on the bushings and now the window...
  5. pirotec354

    Vacuum line?...and wire hiding

    Isnt the condenser located up front by the radiator or am I thinking of something else?
  6. pirotec354

    ABS IS ACTING WEIRD

    Alright ill check that out tomorrow probably and see if i can find the problem there.
  7. pirotec354

    ABS IS ACTING WEIRD

    If your talking about the rings that the wheel sensors read off of then yes, i checked them on every wheel when i checked the sensors, and they seemed to be ok. And i dont think i hit anything when i was checking the hcu, i was pretty careful there. But no i havent checked the e-brake or the...
  8. pirotec354

    gauge install problems

    On the Autometer phantom style gauges they have two seperate power and ground connections for illumination but thats not to say that the style you used didnt. Like toyman said you may have lost your ground if you used the teflon tape. I used pipe dope on my tranny temp and oil temp senders and...
  9. pirotec354

    ABS IS ACTING WEIRD

    Oh no its fine. But yea i just got the car out of winter storage about a month ago but its been driving fine ever since. I did a complete tune up right when i got it out, changed all the fluids and everything. Then it started doing the ABS thing and know all of a sudden its doing this. I cant...
  10. pirotec354

    ABS IS ACTING WEIRD

    Yea i took all my wheels of to check my wheel speed sensors and ive double checked the lugs and made sure that they were tight. I can feel the vibration in my clutch and the steering wheel just a little bit. I can feel the vibration the best at 30 mph but if i go any faster it gets better and...
  11. pirotec354

    ABS IS ACTING WEIRD

    Alright cool thanks Zero_Chance for that. Well after doing that, i have found that the control unit is bad so i just disconnected the power supply to it for now. Having said that, the kickback in the pedal is gone but now i have a slight vibration at about thirty mph that wasnt there before. I...
  12. pirotec354

    ABS IS ACTING WEIRD

    OK i pulled the code tonight and i got a code 63- voltage supply interruption (detects ignition voltage but not voltage for ABS controller). Im going to check the fuse in the engine bay and one under the dash tomorrow b/c its too dark now. But does anybody have a pinpoint test for this. It would...
  13. pirotec354

    Help with codes

    Have you tried checking out your iac solenoid and valve? It could possibly be that cuz some of those can get gunk and stuff on them and prevent them from working right, Causing your idle to be a little higher then normal. Just a thought:shrug:
  14. pirotec354

    ABS IS ACTING WEIRD

    Alright ill check the wheel sensors first and then if that doesnt work ill go to the dealership and get the codes pulled. Thanks guys
  15. pirotec354

    ABS IS ACTING WEIRD

    Ok i can try and pull some codes but my check engine light isnt on its just the ABS light that is on all the time. Will i still be able to pull saved codes without the check engine light being on? Seems like they would all be cleared if it wasnt. Do you know where the ABS electrical connector...
  16. pirotec354

    ABS IS ACTING WEIRD

    Ok so I have a 94 cobra and lately when I go and start the car the ABS light flickers and when I drive down the road and brake, I can feel the brake pedal kicking back at me. And this is on completely dry pavement. And it kinda feels like its pulsing the brakes a little when im actually driving...
  17. pirotec354

    Compression

    Alright well thanx guys i guess ill just take my heads off while the car is in storage for the winter and go from there.
  18. pirotec354

    Anyone know of some good sticky tires?

    drag radials
  19. pirotec354

    Need Help Extreme Hesitation!

    Sounds like a tranny problem. You push in the clutch and it goes away slighlty. Sounds weird, is there any holes in your air intake between the filter and the plenum, there could be a leak and the maf sensor could be reading wrong. Idk just a thought
  20. pirotec354

    Anyone know of some good sticky tires?

    Thanks for the help guys. Yeah i was planning on getting a seperate set of rims for the track, but i just wasnt sure which was the best option. Ive heard multiple things about multiple tires, but now im leaning more towards the MT drag radials and keeping the summitomos for the street. By the...
Top Bottom
Back
Forums
Menu