Search results

  1. fox racer

    Can you make a 347 stroker auto into a 5speed

    Is it the stock flexplate? The 5.0L HO came with a 50oz balance (IIRC), so if it's the stock balance, or stock flexplate, just swap it with a 50oz flywheel. The stock flywheel was 157 tooth/50oz, so if it's the same balance as stock go with that. Who built the motor? You can always ask whoever...
  2. fox racer

    Lifter retainers.......

    No spider/retainers and it's not flat tappet? Check the cam lobes, valvetrain, lifters etc for unusual wear. And locate a spider/retainers. If it's an older block it will need to be retrofitted to work.
  3. fox racer

    Mounting the 10 pin connectors on 93 Cobra intake??

    That's what I did. Although, I did have after market ones and they had a spot for them to clip on, but my clips were broken, so I just left them behind the manifold nicely tucked away and never had a problem.
  4. fox racer

    Removing a shell? R.I.P. Mustang

    Yea the Gotti look gets annoying, but there is a STRONG Mustang turnout on this little island, and 25th, you're car would be like a god here.
  5. fox racer

    Removing a shell? R.I.P. Mustang

    Most people hate SI... Because of the beautiful women here. So no hard feelings lol
  6. fox racer

    Removing a shell? R.I.P. Mustang

    Haha, I guess you've had the joy of coming through? What I was trying to say was this: My notch is a titled 4 cylinder, and I pay something like $166 a month. I figure if I get the R/T it will AT LEAST double, probably nearly triple (considering V8). The SXT is still a V6 but it is a pretty nice...
  7. fox racer

    Removing a shell? R.I.P. Mustang

    When did I say I was strapped for cash? I was just assuming it was going to be an exorbitant amount of money because it's just a body. If anything, I'm guilty of living too far under my limit and missing out on somethings. It's nice to see JY's will take it for nothing really. I was honestly...
  8. fox racer

    Removing a shell? R.I.P. Mustang

    Well guys, my Mustang R.I.P. I never got to finish my project, so I decided to sell my car as a roller. Mid tear down, I came across some serious rust on the rear floor pans, that went completely unnoticed. So I'm completely parting the car out now. That said, how the hell do I get rid of a...
  9. fox racer

    Swapped ignition cables and now...

    The check engine light is on and the car shakes when in drive. WTH. I am mostly certain that I put them on correctly (Order), but just to check, what is the firing order on these cars? What causes this? Do I need a tune after I swapped ignition cables? What am I missing here?
  10. fox racer

    94-95 Spindle Question

    Wrong. 94/95, 96-98, 99-04 are all different (I MIGHT be wrong with the 96-98 & 99-04, but the 94/94 is DEFINITELY different from the 96-04). Here's the quick way to tell the difference: Hold the spindle so the hub/lug nuts are facing you. Now look at the steering arm. If it has a curve in it...
  11. fox racer

    Installing Cobra rear pads?

    MODS: please delete. I got the info I needed. Sorry for the mis-post.
  12. fox racer

    Brake questions...

    I got my MC from 50 Resto (http://www.latemodelrestoration.com/iwwida.pvx?;item?item_no=LRS-2140D%20%20%20%20%20%201&comp=LRS) and a A1 Cardone Cobra Brake booster that I got off eBay for $105. The MC pictured is not the one you get, the one you get comes with a reservoir, reservoir cap, and low...
  13. fox racer

    How much upgrade are the 2001 calipers over the 95 calipers?

    Well, they are dual piston and made of aluminum. You get better braking plus a lighter caliper. 01 caliper (alum, dual piston) > 95 caliper (cast, single piston, not much better than fox body stuff)
  14. fox racer

    tensioner q's

    Or the pulley, I forget where but the sell a billet tensioner pulley that is a very nice peice. Remember, the bolt that holds the tensioner pulley are reverse threads.
  15. fox racer

    Finished 5 Lug conversion... *Pics*

    You usually have to bend/reroute the hard lines a little bit to get them to hook up to the 94/95 soft lines. OR you can cut and flare the lines shorter for a cleaner look.
  16. fox racer

    ball joints

    They're the same. Go with the cheapest set you can find, some have found around $100.
  17. fox racer

    Best handling struts/shocks to match B springs

    Whoops, sorry Dean, I misread the post. In that case, you might get away with B Springs ad a decent shock/strut. But if you want to spend the money, Bilsteins and H&R Race springs will give you great handling, but not kill your ride too much. That's the setup I'm going for. As for 87foxstang...
  18. fox racer

    Help build Mustang parts Search

    Maximummotorsports.com The best quality and service you can find for Mustang suspension needs. GEFRacing.com Good pricing, fast shipping. Buyfordracing.com Best prices on brakes anywhere.
  19. fox racer

    Notch or Sn95?

    Notch /Thread
  20. fox racer

    Best handling struts/shocks to match B springs

    You have to pick one. Saying you want a corner carving drag setup not only contradicts itself, but really won't happen. What you're looking for I would assume is a good overall performer? In that case, if funds allow it, you can't go wrong with Bilsteins.
Top Bottom
Back
Forums
Menu