Search results

  1. rednotch

    Need some camshaft guru advice on power loss from supercharger to nitrous

    I'm still going with jetting. Over on corral he said its 73/42 jetting which is a super fat "175" jetting on old shark kits, not 125. I still use those but keep nozzles kits at 150 or below, otherwise something all ways ended up hurt eventually with distribution issues on efi intakes, prefer...
  2. rednotch

    SOLD Free Xmas goodies

    Ill take the cable save me from having to order new one. PayPal ok?
  3. rednotch

    Need some camshaft guru advice on power loss from supercharger to nitrous

    Exhaust timing of the cam for nitrous vs boost are two different animals, a cam designed for a nitrous combo is almost of always a dog on motor but I doubt that's the issue. What's the jetting and fuel pressue , Is a shark nozzle? a "100- 125" shot would be 52/33 on old fox body kits and...
  4. rednotch

    Progress Thread BluePrint 347 long block engine swap

    Fine from what I've seen for the most part if you don't try to rev them up there, there heavy for a roller rocker, like 250 grams.. Judging by the dyno cut off of 5900 bpe probably sets em up for 6k and under with the valvetrain and hardware..
  5. rednotch

    Any 1 find any decent blackfriday sales for Foxbody or car stuff?

    Cardones are reman units, skp is the new units.. Used both skp was way better shape than the reman I bought years ago, both worked fine.
  6. rednotch

    Progress Thread BluePrint 347 long block engine swap

    China rockers, stainless, many brand them just like the China sourced dart clone heads bpe brands, there the only one with those castings in the pedestal option but many sell the stud version yongyu industrial cast the heads, think Y&j make the rockers but never dug into those much...
  7. rednotch

    Any 1 find any decent blackfriday sales for Foxbody or car stuff?

    The skp boosters still cheaper elsewhere $82 plus shipping on RA plus there discount code.. SK5473155 same thing lmr's branding...
  8. rednotch

    Any 1 find any decent blackfriday sales for Foxbody or car stuff?

    Didn't see many good sales this year but snagged some junk. Speed master has damn good price cuts up to 60% off for the next cpl days but not many products I have used. Picked up a couple of there header stud extra Clarence kits half off, some basic gaskets, cheap $40 valve covers for the 79...
  9. rednotch

    Fox Ideas for Theft Deterrence in Storage

    That's why you use a soft one under the waterproof stuff and strap them.
  10. rednotch

    Fox Ideas for Theft Deterrence in Storage

    If its outside pull the fuel pump relay or ignition rotor and buy wheel chalks you can chain together on both sides of the tire. Will stop all but a lift gate repo truck from taking it. As for out side storage go buy a cheap budge car cover, then a cheapy water proof 185-193 generic car...
  11. rednotch

    Best plugs for carb'd roller

    Its a carb car, bit different for initial vs the efi stuff, what's it seeing full advanced, are you checking it with a decent dial back light or just setting initial, good way to see if the marks are off with a dial back light. How are you controlling the timing, threw the msd box or a vacuum...
  12. rednotch

    Progress Thread Epaws Fox

    Lol at the parts list. "Mater" axles probably moser... If the rear springs are blue and has a bag on the p/s rear probably the old eibach drag kit race drive shaft is probably just an old motorsport aluminum looks like a basic late 90's build
  13. rednotch

    Best plugs for carb'd roller

    All ways ran auto lite 24's in stock heads, though they call for 25's 1 heat range higher, 3924's if aluminum heads, stock ignition systems mostly gapped at .045 since almost every car had a nitrous kit on it at some point never had issues.
  14. rednotch

    79 with 130amp alt

    Pa has a kit for it with a regulator..... The regulators needed for factory gauge to work. The 79 I picked up has neither but haven't messed with it yet, or looked into it too much other then the PA performance kit. Right now mines got aftermarket gauges and a rats nest of wiring with a...
  15. rednotch

    Engine Explorer - Lower intake internal cleaning

    A few mins with a cut off wheel taking the corner bracket off the upper cleans them up a bit if your painting the upper. If not I would at least clear it to keep it from oxidizing. Edit looks like you all ready sprayed it based on the core plug color though.
  16. rednotch

    Engine Explorer - Lower intake internal cleaning

    Not really early ones used the same -BA lower as the motorsports stuff, only different was the big baffle.
  17. rednotch

    Engine Explorer - Lower intake internal cleaning

    That's pretty much the standard any more..... Used to just by the cheap gasket set for a 96-01 explorer from parts stores that came with the graphite lower intake gaskets for under $20.. MS 95952, but they ain't cheap any more at the stores these days.
  18. rednotch

    Oil Pressure Sending Unit Connector

    Your local parts stores should have them... Even Napa sells it for $6 and change.. ECH EC104
  19. rednotch

    Newbie looking for some info on speedo gears

    Pretty much have to swap aod Speedo gears for t5 version anyway most of the time... Jack the rear of the car up on stands, mark the driversahft, spin the tire 1 time and counting works pretty well for figuring out what gears, then find out which of the three drive gears is in your T5 and your...
  20. rednotch

    Oil Pressure Sending Unit Connector

    This except I use a ring terminal for the auto meter electric then the factory connector on top ofit if I want that to work, sending unit ohm range is the same for the canister style and 2241 autometer uses with the short sweep gauges.
Top Bottom
Back
Forums
Menu