Search results

  1. J

    My car keeps stalling.

    how old is the fuel filter? pump? any changes in the combo lately?
  2. J

    ACT sensor- who, what, when, why and where?

    I found a good picture of another 5.0, it had the same colors going to the ACT, by the #5 intake runner/injector. I stripped the two wires/plug out of the injector harness and plugged it right up to the ACT sensor...... not real sure about the wires colors jrichker, but its the only two pin...
  3. J

    ACT sensor- who, what, when, why and where?

    was it in the runner by the #5 cylinder? I wander why there isn't a place on this explorer intake? does the colors sound right for that sensor? white/red, green/red?
  4. J

    ACT sensor- who, what, when, why and where?

    First off, I bought this motor.....explorer intake, GTP heads, mustang 306 block, sc trim vortech. motor is in a 85gt, with a 86 harness, converted to mass air.....OK. car barely runs when cold....(I think I have more than one problem) the dude has mounted a sensor in the elbow just...
  5. J

    new swap won't start----help please

    car is started and running. I soaked the injectors over-night, and blew them out this morning, all of them started working. I put it all back together and she fired right up..........after getting it all running, timing set etc I have noticed #2 and #6 are not firing......I turned out all of the...
  6. J

    new swap won't start----help please

    pulled the upper and fuel rail.....allot of trash in the rail. not a one injector "clicking", going to soak them over night and try to get them working in the morning. If I can't get them to work I will be looking for some........maybe will upgrade now. thanks for the replys, will update when...
  7. J

    new swap won't start----help please

    hooked up an injector tester. good injector pulse on all injectors I could get to. I was able to get the car to fire off with some starting fluid, but it wouldn't do more a cylinder or two...... I am thinking bad injectors.....the motor had been sitting for a while.....what do you all think?
  8. J

    new swap won't start----help please

    I guess I should add, its a 85 GT(was an auto), with a 86 GT harness, converted to mass air by myself (I have done four conversions)
  9. J

    new swap won't start----help please

    just checked it, it is grounded to the top bell housing bolt
  10. J

    new swap won't start----help please

    The car cranks, has spark and seems to have power at the injectors. cranks like the timing is dead-on, but no hint of ignition. Pulled a plug, it was dry. The fuel pump runs like it is supposed to, I checked fuel pressure the shrader valve on the rail, there is pressure. there are two...
  11. J

    Pinion seal/bearing

    hold on to the yoke flange with your hand and a rag......use impact obviously.
  12. J

    T-5 trans sensors?

    thanks, that is what I thought it was, but wasn't sure.......
  13. J

    T-5 trans sensors?

    I am getting ready to put the motor/tranny back in the car. what is the top forward sensor on the T5? up top, right by the bell housing? is it needed? thanks
  14. J

    Alternator Identification

    I bought a complete motor/supercharger/tranny to put in my new project......the alternator looks new, how do I tell what I have? thanks all!
View older results
Top Bottom
Back
Forums
Menu