Search results

  1. soontobefastfox

    15x6 Street Lites w/ 99-04 PBR GT Brakes (5 Lug Swap)

    That's what I thought! I am very happy because I really didn't want to grind calipers or mess with spacers! I can't wait to see the improvement in braking power! I just love the look of 15x6's up front with rear 15x8's with 275/60's! 15x3.5 is too narrow for my street car taste!
  2. soontobefastfox

    Line Lock/2-Step Wiring Question: Clutch Switch?

    I am currently preparing all of my instructions for my winter mods. One of them consists of installing Hurst Roll Control (Line Lock). I already have an MSD Digital 6 Ignition Box (which has a 2-Step feature). My question is can I wire up a circuit that will only allow for the line lock/2...
  3. soontobefastfox

    15x6 Street Lites w/ 99-04 PBR GT Brakes (5 Lug Swap)

    That is what I thought. I contacted billet specialties and they said that the wheel has an inside diameter of 13.17" therefore pbr gt brakes should work! Posted via Mobile Device
  4. soontobefastfox

    15x6 Street Lites w/ 99-04 PBR GT Brakes (5 Lug Swap)

    Does anyone have the combo? Does it need a spacer or any caliper grinding? I am curious because I am converting my fox to 5 lug using 99-04 Brakes w/ 94 spindles. I am going to be running Street Lites and wondering if they fit or require any modification. I know the 15x3.5 need a spacer, I...
  5. soontobefastfox

    LX 2.5" Tailpipes with 3" Tips

    Anyone?
  6. soontobefastfox

    LX 2.5" Tailpipes with 3" Tips

    I have the Dynomax Ultra Flo SS Catback and the tailpipes it came with are 2.5". I don't want to replace the catback because I LOVE the way it sounds (much deeper than most 5.0's). Anyone have part numbers or places that sell these tailpipes?
  7. soontobefastfox

    LX 2.5" Tailpipes with 3" Tips

    Who makes these? I am in need of some new tailpipes and would like to have 3" LX tips (my entire exhaust system is 2.5").
  8. soontobefastfox

    Help! Won't Start or Crank

    Got it to start! Looks like assesment was correct. I replaced the starter cable and it started right up after noticing the replacement starter solenoid I purchased has 4 posts instead of 3 posts like the stock motorcraft solenoid. Put the stock solenoid back on and it fired up no problem. I...
  9. soontobefastfox

    Help! Won't Start or Crank

    Just checked the clutch safety switch and the reset the inertia switch and the car still won't start. I'm going to get a new cable from the solenoid to the starter because when I tried the screw driver method on the solenoid post (jumping) I didn't hear the starter do anything. I know the...
  10. soontobefastfox

    Help! Won't Start or Crank

    Other items to mention: - I have checked to see if there is Fuel pressure My starter solenoid only makes on click when trying to start it. That is good correct? It is not rapidly clicking. Last night I had a buddy measure the voltage at the starter side of the solenoid and it read 0 volts...
  11. soontobefastfox

    Help! Won't Start or Crank

    I can't figure out for the life of me why my car died will driving on the highway on Friday. I was driving and lost ALL electrical power. Car wouldn't start again. After being towed home I noticed that my Optimum redtop was pretty much dead. So I charged it up tried to start it again, won't...
  12. soontobefastfox

    My LED taillight panels... which version should I use??

    Did you create a wiring diagram or a parts list for this? Thanks
  13. soontobefastfox

    Ordered my Exhaust today!

    They aren't that bad, I just prefer it to be a little quieter and drone free at cruising speeds. My fox which is extremely loud doesn't drone on the highway. I also like the tips a lot more on the GTA's compared to the borlas.
  14. soontobefastfox

    Ordered my Exhaust today!

    I just ordered my exhaust today! Pypes SS Emissions Legal X-Pipe from Brenspeed and Ford Racing/Supreme Performance GTA Axle back from Ninosport. The axle back is on back order and won't be shipped for 1 - 2 weeks. I am in no rush but I am looking forward to hearing it. I assume it will be...
  15. soontobefastfox

    ROH Snipers...pics

    Nice deal. ROH makes awesome wheels for the Foxes. I got the ROH ZS on mine and absolutely love them.
  16. soontobefastfox

    Cometic Head Gaskets LEAKING!

    Finally got my stang running. I decided to go with Fel-Pro 1011-1 gaskets because I don't plan on running to much boost (~10-12 psi). Thanks for all the help guys. Sorry for bring this back from the dead.
  17. soontobefastfox

    Which HG for boost

    NO! I would high suggest to stay away from Cometic head gaskets. I ran them on my stang they leaked water into the exhaust valve. So my exhaust was steaming. Just do a google search about cometic gaskets and their problems you'll find they aren't worth running. Also their customer service is...
  18. soontobefastfox

    OEM Shift Light?

    From what I've heard its not enabled. Its for the GT500 only.
  19. soontobefastfox

    Champion 1 Piece Spark Plug Rebate

    I am on Summit's email list. Check your PM.
  20. soontobefastfox

    Champion 1 Piece Spark Plug Rebate

    Good to hear. I am going to change my plugs very soon.
Top Bottom
Back
Forums
Menu