Search results

  1. H

    puttin some neon's (not the car :| )under driver side dash board?

    WTF do you need to see your feet working the pedals for?
  2. H

    need help cutting out stock mufflers

    If you're cheap/broke you can use a regular hacksaw. Cut the stockers as close as you can to the top of the inverted U that goes over the axle.
  3. H

    IAC location?

    Cleaning my IAC did work for me. Car wouldn't idle (of course) and would only keep running if I held the throttle down a little. As a temporary fix I had to stick a piece of an old credit card in where the throttle linkage is to keep it from going all the way back to idle position. When I...
  4. H

    Got Screwed NEED ADVICE

    They're idiots?
  5. H

    ABS Light

    Short circuit.
  6. H

    Hesitation and popping in exhaust

    laser, did you have the MILs on constantly?
  7. H

    Question about the warranty! (yah i know)

    They might even go so far as to void warranty work on your tranny.
  8. H

    Rear Suspension Help!

    So they just do the lambada? :) Certain suspension setups will let you remove the quads with little to no impact, e.g. TA+PH.
  9. H

    Hesitation and popping in exhaust

    ^
  10. H

    New Throw-out-bearing, now clutch to high

    Yes, the adjustable cable/quadrant is the solution to your "problem."
  11. H

    Dealer wants $120 just to clear ODB code!

    You could just buy your own code reader at HF: http://www.harborfreight.com/cpi/ctaf/Displayitem.taf?itemnumber=46030
  12. H

    Hesitation and popping in exhaust

    You're not throwing codes either, are you? Might it be the fuel filter?
  13. H

    hesitation problems after mod

    Have you checked your idle air control valve?
  14. H

    Need help installing new taillights

    Chiltons/Haynes
  15. H

    Hesitation and popping in exhaust

    I have a '98 GT, stock aside from a cat-back. I'm getting this engine hesitation and these popping noises in the exhaust under acceleration, mostly when I'm under about 1500 rpm, any gear. It happens less frequently when I'm accelerating gently, and happens often when I floor it. But when it...
  16. H

    Stripped bleeder valve ...

    How did you manage to strip it? You screwed it in too tight???
  17. H

    Help with squeeky front brakes!!!!

    Got no squeaks here after almost 6 years...
  18. H

    How To Remove Window Tints

    Just dilute some ammonia and soak the sucker. Then use a non-abrasive pad and some more ammonia mix to scrub off whatever adhesive remains. As long as you use something non-abrasive, the defroster wires will be fine.
  19. H

    Getting rid of the X-Pipe raspiness! Baffles are the answer!

    Same dude but the pic looks like it's from "Office Space" to me...
  20. H

    Headlight adjuster screw came out! Please help!

    Time to get some blingy headlights on eBay. :)
Top Bottom
Back
Forums
Menu