Search results

  1. ttopstang

    Magical Disappearing Brakes - 92 Mustang

    I finally helped somebody.:D I have been watching his videos at work for the past week and I remembered that video so I thought it might help. He has pretty good videos on diagnosing different problems and explains everything very good.
  2. ttopstang

    I think I got burned!

    The rear end is a junk 7.5", but you have a complete rear disc conversion, you just need to pick up some fox length 5 lug axles to use in your 8.8.
  3. ttopstang

    Should I Lower My Car? Thinking about B Springs.

    I should have went into more detail. When I first put them on, with no adjustment, one side was adjusted all the way back and one side was in the middle, and the side in the middle was .5" lower than the one all the way back. I haven't got an alignment yet, but I adjusted them the same on...
  4. ttopstang

    Should I Lower My Car? Thinking about B Springs.

    After I put CC plates on my car, the front left sits about .5 inch lower than the front right.
  5. ttopstang

    Magical Disappearing Brakes - 92 Mustang

    You might want to give this a try, seems like the same symptoms you're having. YouTube - Brakes hard to bleed
  6. ttopstang

    Need some advice on hatch alignment

    I have tried the adjusting the 2 bolts that hold the hatch on, but it still doesn't close right. At best, I have to SLAM it hard like 3 times to get it to latch. I bought a new bushing for the striker or whatever its called. Is there any tips or tricks besides adjusting the 2 bolts?
  7. ttopstang

    Anyone know where to get?

    I'm also looking for a sway bar mount. I know prestige mustangs will have one, but I'm too cheap and just waiting for the local pull a part to get a new stang in.
  8. ttopstang

    whatcha know bout

    Your car must be loud, look at the guys closing their ears
  9. ttopstang

    McDan's Notch 408w build

    Those headers look bad ass!
  10. ttopstang

    What do y'all think about this car?

    My bad, they are the ford racing valve covers but the "tall" versions. Just like these, except I got the black and red ones...Ford Racing M-6582-E302P - Ford Racing Aluminum Valve Covers - Overview - SummitRacing.com
  11. ttopstang

    What do y'all think about this car?

    I have trick flow valve covers and that's the side my oil cap is on.
  12. ttopstang

    What do y'all think about this car?

    I don't think its too bad for $2500, but I would take him $2000 cash.
  13. ttopstang

    By Passes Heater Need Info on hose on water pump

    I'm doing the same thing. A regular hose kinked on me so if I were you I would just get a preformed one. Does it matter which one of the outlets on the water pump you put the hose on? I thought it was the top, but you said bottom.
  14. ttopstang

    Buying my 1st Fox 5.0

    I wish I would have joined this forum before I bought mine. It would of saved me alot of trouble. Good luck, and let be sure to post pics of the new ride.
  15. ttopstang

    Buying my 1st Fox 5.0

    I'm with shaolin on the paint, I bought my stang with it needing body work and paint, so I paid a guy who says he paints on the side $1000 to paint it and I regret that everytime I walk in the garage. A good paint job with minimal body work will cost you at least $2500. And my brother just...
  16. ttopstang

    6AL problems

    I've also heard bad things about msd. Does anyone know the "best" ignitions? Crane, Mallory, Accel, etc.
  17. ttopstang

    Ford 9" vs 8.8"

    They showed this weekend on extreme 4x4 why the 9 inch was stronger and desired, 1 of the reasons was the ease of gear swaps like jrichker pointed out, the reason it was stronger was the pinion(I think thats what its called) shaft has a bearing at the end after the small gear and it keeps it...
  18. ttopstang

    good engine or bad engine?

    I agree with 2000xp8, don't go carb, it makes a bad impression when you pop the hood. You already have the trick flow upper intake, so all you would need is the 351 lower. I would change the heads out too. I swapped mine for some twisted wedges and have the old 351 heads in the shed that I...
  19. ttopstang

    good engine or bad engine?

    While its on the stand I would take the heads off, see what kind of pistons it has, they should be stamped if it was bored, and then take the oil pan off and just look around. To be on the safe side, replace the oil pump while your in there and get a 1 piece blue gasket. I don't know what...
  20. ttopstang

    Dyno day is near, any hp tq guesstimations?

    I've got a 4" cowl hood for sale, but you probably don't want one that big.
Top Bottom
Back
Forums
Menu