Search results

  1. Stang951

    Pictures of Antenna Shave Project

    MustangJoe, what type of glue is used in this process? Is it like JB Weld or some other type of epoxy? Sounds like a good alternative to those of us who don't have access to welding machines!
  2. Stang951

    ! ! ! Beautiful - check it out ! ! !

    Gotta get my post in too
  3. Stang951

    Do I have to have GT body parts for a Cobra kit to work?

    Yeah I had to get the door mouldings, got'em from 50resto. HMMMMM, wonder whats wrong with the site, all the pics are on the Stangnet servers. Try these pics:
  4. Stang951

    Do I have to have GT body parts for a Cobra kit to work?

    If you get the Cobra kit from Cervinis you will be fine using the Stalker front bumper and you will not need any extra hardware or mounts. That is the kit I used on mine. Check out my Stangnet site: http://www.stang951.stangnet.com/
  5. Stang951

    swapping aero-nose to four-eye - how hard?

    The mouldings wont match and you may have to change the fender extensions as well. So far you are looking at a new hood, front bumper, wiring and possibly extensions, as well as mouldings.
  6. Stang951

    Can get a 140mph cluster from junkyard will the speedo work in my 87

    Well you are correct. That is what I did to mine. Check out my article if you have any questions.
  7. Stang951

    Can get a 140mph cluster from junkyard will the speedo work in my 87

    There is one problem, the cluster for 90-93 have clearance for airbag crap. If you want to do it right you either need to send your speedo to someone to recalibrate it or you can follow my directions and swap just the mechanicals.: http://personal.msy.bellsouth.net/j/p/jp951/140mph_gauge_swap.htm
  8. Stang951

    gas guage going crazy where to start the hunt??

    You shold be able to use the tank, the chasis is the same back there. You may also want to check the sending unit. My flaot assemly comes loose from the assembly, making the rheostat inside jump all over the place, sometimes not even making contact.
  9. Stang951

    fuel system for carb options

    I originally did mine that way too. Only difference was I used an aluminum tube where the pump was with rubber connectors at each end. The problem with that is the lines are way too small. They are great for high pressure, but not for volume, which is what you need for carbs. If you are on a...
  10. Stang951

    anyone in Louisiana ?

    lol.....Givin ya a hard time
  11. Stang951

    fuel system for carb options

    I left the line for the cannister filter to the front, sumped the stock tank and ran -6an braided line to the front from my Holley Blue. You might run into a problem with the tank pick-up and an electric pump because it will have to work twice as hard to draw the fuel UP into the line and then...
  12. Stang951

    More electrical problems...

    If not the TFI module check all of the connectors under the hood. The power wire to my coil in the grey connector shorted out and would not make contact inside of the connector. I had to jump it out. Another thing to check would be all of the connections to the fusible links. I also had this...
  13. Stang951

    anyone in Louisiana ?

    Dude where are you talking about? Airline is South of the airport and runs East to West. I-610 runs in New Orleans only, between Franklin Ave and Canal Blvd. Do you mean west of airline past the airport, toward St. Charles parish and Laplace? ****for a side note, I heard that the...
  14. Stang951

    how to relocate starter solenoid to the trunk..anyone done this

    Thief gets in the car, pops the switch with a screwdriver (HIGH quality Ford locks) and wont start because of alarm, etc. A quick look under the fender and vroom, there goes my car.
  15. Stang951

    redoing my taillights.... ???

    89Sleeper is right. It is like a putty that comes in a roll. It is some kind of trim or window sealant. Shouldn't be too hard to find. I didn't use any when I polished and repainted the housings on my taillights and haven't had a problem with water, even with the 150% humidity and constant...
  16. Stang951

    What causes A-Pillar Cracks?...picture

    I saw a 4 banger that happened too also. Eventually it cracked the roof as well. Better stiffen that thing up fast.
  17. Stang951

    Who sells a COUPE rear seat delete kit?

    Check ebay. You can find the kits and just plans to do it yourself......and nect time SEARCH, this question has been covered TOO MAny times.
  18. Stang951

    how to relocate starter solenoid to the trunk..anyone done this

    I put mine in the trunk, but the battery and the cut-off is there too. That and I dont have inner fenderwells, so a good examination from a thief could lead to my car missing in action since all it would take is a screwdriver to start it!! Did anyone think of that???Maybe I'm paranoid.......
  19. Stang951

    Mustang Owners Worst Dream

    I am a police officer just outside of New Orleans. I have to work 36 hours extra a week to support my family and sometimes dump a couple of dollars into my Stang. If someone tried to steal any part of my Stang which is not just a collection of replacable parts, but is also a collection of my...
  20. Stang951

    Roller conversion!!!

    I just looked the Crane lifters up and came up with part number CRN-36532-16. From Summit Racing the lifters alone are 419.95. That seems expensive to me since you have to add a camshaft and special lenght pushrods to go with them.
Top Bottom
Back
Forums
Menu