Search results

  1. Jerry Leaming

    Driveshaft loops

    Who makes the driveshaft loops on everybodys car? The last P.O.S that I tried to put on my car didn't fit even thou it said it was for my year car. I know there is a difference between a fox and a sn-95 so who makes a loop that fits and isn't a major pita to install?
  2. Jerry Leaming

    Mustang w/ a miss

    Check for any vacuum leaks also. Or a stuck PCV valve?
  3. Jerry Leaming

    Question about LCA & sway bar

    You installed the arms wrong they need to be switched left to right and vice a versa. If you look at the bracket where the sway bar mounts the plate should be off to one side or the other.
  4. Jerry Leaming

    people with magnaflow catback, what x/h to go with?

    Go with the Mac Prochamber off road pipe they claim more hp then a X or H pipe and they sound really nice.
  5. Jerry Leaming

    Which engine to use?

    I'd say 351 stroked to 393. Only price diffrence will be a new crank. stock rods work and you'll need new pistons anyway so 393 is my vote.
  6. Jerry Leaming

    What do you think? Good idea, or bad?

    Go for it................NITROUS is fun.
  7. Jerry Leaming

    Clutch Question

    Sounds right to me.
  8. Jerry Leaming

    $200 to Spend

    1.7 cobra roller rockers FMS aluminum drive shaft. Short throw shifter
  9. Jerry Leaming

    Over heating

    HEAD GASKET Seen this problem many times before and most if not all of the time its a head gasket. Hopefully you wanted to do a H/C/I upgrade really soon.
  10. Jerry Leaming

    Difference between a 95 Cobra and a 95 GT?

    Price!!!!!!!!!!!!!
  11. Jerry Leaming

    rear seat delete

    Anybody using a rear seat delete with a roll bar? It looks like the delete kit will hit the down tube behind each of the seats. Is there a kit out there that is designed for a roll bar or do the kits on the market just fit right in? Looks like a 37 lb saving with leather seats and the cool...
  12. Jerry Leaming

    Damn aftermarket seat brakets SUCK

    I used corbeau seat brackets on mine, they line up fine. My problem is the same as red ink they sit to high for my taste. I did some modifing to get a lower seating position. Now they are fine.
  13. Jerry Leaming

    Nitto DRs vs BFGoodrich DRs

    bfg's are way softer and have less tread from the get go and IMO they hook better than Nittos(ran both). On the other hand the nittos will last longer than bfg's if your doing a lot of street driving. So I guess choose your poison....
  14. Jerry Leaming

    steering wheel alignment

    Anybody else????????????
  15. Jerry Leaming

    what to do......help

    Hold on to it until you can make your own choices............ then put it on.
  16. Jerry Leaming

    How to protect polished rims?

    Zoop seal or clear powder coat them
  17. Jerry Leaming

    How many miles do you have on your Mustang?

    low 12's at 119.5 with a limited traction(1250-1500 launch) and clutch problems.(damb Mcloed sent me the wrong part, fixed now) Full weight/full exhaust/full power Shooting for 11's this year.
  18. Jerry Leaming

    How many miles do you have on your Mustang?

    67000 and everything new or rebuilt
  19. Jerry Leaming

    steering wheel alignment

    Need to clearify I'm not refering to a out of align front end causing the steering wheel to be turned while driving straight. I'm refering to the steering wheel being further away from you on the left hand side and closer to you on the right hand side. Almost like the steering wheel needs to be...
  20. Jerry Leaming

    steering wheel alignment

    Has anybody else noticed there steering wheel isn't square(cocked to the left) to the seat in the sn-95 stangs. I was wondering is there a way to adjust/square them back up. I know mine isn't the only one out there because I have seen numerous other stangs like mine. Any thoughts?
Top Bottom
Back
Forums
Menu