Search results

  1. 94CobraPace

    Vortech+TB question

    I don't think it would make a much of a difference. The reason is the small plastick tube from the discharge opening of the supercharger is smaller than the TB.
  2. 94CobraPace

    Source for Nylon Gears for Electric Windows

    The help section at the local auto parts store.
  3. 94CobraPace

    Cobra Engine is IN! (the conversion continues)

    Always feels good doing something like this yourself. Congrats.
  4. 94CobraPace

    AFM power pipe

    Mine is coming as I type.
  5. 94CobraPace

    Latest engine bay mods!

    Awsome dude.....
  6. 94CobraPace

    stock 94-95 cobra rwhp?

    My 94 dynoed 231 rwhp & got up to 255 rwhp with basic bolt ons. A friends with 7k miles put down 222 rwhp.
  7. 94CobraPace

    Rear main seal Question... replacement

    Get the car as high as possible. A good set of hand tools, with long extensions a must. A 12 point 12 mm for the drive shaft, it's tight also. A extra set of hands will be so valuable with the heavy AOD. Can do in a saturday. Worth doing yourself, save money and knowing you did it yourself.
  8. 94CobraPace

    Weld In Flowmasters (finally)

    The flows drone BAD on my 01. So bad that they did not last over 2 weeks.
  9. 94CobraPace

    Canton Rad Overflow Tank Problems

    I got mine from someone who could not get it to fit. I removed 1" from the front side, radiator side. Cut with a band saw and removed 1", then had it welded back together. Moved the mounting tab to be able to fit also. I have a aftermarket radiator, Ron Davis and a Vortech and it fits NOW...
  10. 94CobraPace

    Power Steering Pulley Installer

    What part of the rental tool did you break? If it is the threads, then possible the power steering shaft internal threads might be messed up?
  11. 94CobraPace

    Subframe connectors for 95 Vert

    Get the full length sub frames, much better than the shorter ones.
  12. 94CobraPace

    Can I get SUPERCHARGED???

    Need to know where the piston is in the hole. I'm running KB flat tops (6-7cc valve reliefs) with my AFR 185's (63 cc) and .010" in the hole, .039" head gaskets and the caclulated compression ratio is around 9.3. I had a Powerdyne (9lb pulley & made 390 to the wheels & 425 rwtq), but have...
  13. 94CobraPace

    96 Cobra Hood on 95

    Fits with no issues and is a really good looking hood. My 2nd choice.
  14. 94CobraPace

    vortech v1 T trim

    That is a good price for sure.. The T trim puts out lots of air and will make good block spliting power. A good safe tune with 42 lb injectors (minimum).
  15. 94CobraPace

    Painting Dashboard--How To--WARNING---Ton's Of Pic's.

    Looks good.. Nice write up. Subscribed for when I have to paint some interior panels.
  16. 94CobraPace

    finding borla stingers

    Those "look" like the stingers I have on the 01 Cobra.
  17. 94CobraPace

    Installed new engine wont start

    Does sound like the timing is off. Rotate the dizzy and try again.
  18. 94CobraPace

    Can stock '03/'04 cobra injectors be used in a pushrod engine?

    Yes they work, need adapters for the electrical connections. I have them on the 94. EV6 to EV1
  19. 94CobraPace

    stupid emissions

    Run the car before taking the car there to get the cats hot, but don't let them idle the car and get the temp way up (what they did with mine). Next time back I pulled the spout, drove it for a bit, then did not let them let the car sit and idle, pass with ease.
  20. 94CobraPace

    Simple question about line locks?

    One will work fine, mine is between the MC and porpotinal valve.
Top Bottom
Back
Forums
Menu