Search results

  1. 94CobraPace

    quick question about 3.73 and mpg

    The speedo is approximatly 5% off.
  2. 94CobraPace

    Nitrous Purge through hood is FINALLY done! Video!

    That is kewl. Most definalty different and not in a bad way.
  3. 94CobraPace

    *PICS* My 331 stroker

    Nice.... You can always have a machine shop machine for stud mount rockers for around $80, then get some roller rockers. The ped mount is not bad if you keep the revs below 6k rpms. Makes me wanting to get my 331 stroker with AFR 185 head together when the machine shope gets done.
  4. 94CobraPace

    massive gas leak

    Yep, that groumet is the problem. I always change that out when the tank comes out, cheap insurance.
  5. 94CobraPace

    I smell Anti-Freeze

    Sounds like the heater core.. I just did one in my 01 V6 driver. It took me all saturday, I'm too cheap to pay someone else to do it. What a pain. The steering wheel, center console & the entire dash. Had to evac the AC system also.
  6. 94CobraPace

    94 AC/Defrost vent issue

    On the 5.0's there is a vacuum tree on the drivers side fire wall that breaks and causes a leak. The vacuum hose controls the vent location. Check on the fire wall for any vacuum hoses that have came apart or broken.
  7. 94CobraPace

    "Drive" pretty kewl new show

    No a bad show for entertainment purpose only. It probly won't have any more cool cars. I'll keep DVRing it also.
  8. 94CobraPace

    Cobra R Hood Question - Cervini - Fibertrends

    My Cervini fit perfect. If you are that worried about the logo, you can have the body shop sand if off and finish it, no free advertisement for them.
  9. 94CobraPace

    Broken door hinge?

    What kind of truck. Chevy trucks hinges are not bolted on, or used to be.
  10. 94CobraPace

    TrickFlow vs AFR's

    For the price difference, especially at what you got the TW for, keep the Trick flows.
  11. 94CobraPace

    what kind of times could i expect at the strip with my mods ?

    High 14's with street tires. Mid to low 14's with traction.
  12. 94CobraPace

    Drilling Fuel Injector Holes?

    I would not try if with a hand drill, posssible a drill press at a min. Then make sure the intake is at a 90 degree angle. Most drill presses have a scale on the handle for depth. Then I would not do it on a new intake, possible a older cheaper one. Getting 8 all the same angle and depth...
  13. 94CobraPace

    teach me about superchargers

    You can run a FMU & keep the boost on the low side, yes the FMU is not the most efficient and leaves some power on the table, but it does work. You will need a larger fuel pump, retard the time to 10 degress, 1 step colder plugs, fuel pump & FMU caled to your 19 lb injectors. Lots of people...
  14. 94CobraPace

    New track times

    Good times... Congrats on the new times & not breaking anything.
  15. 94CobraPace

    Line lock questons

    I have a Hurst line lock. Works good. I had a shop install it, too lazy. I also got the Summit installation kit & not sure if it had all the necessary fittings. I installed it to make it easier with a manual, save the rear brakes, clutch and rear. Plus easier.
  16. 94CobraPace

    Pic Request: cobra R hood on a vert

    Here is the Cervini Cobra R on my 94 Cobra Indy pace car vert: Hope this helps.
  17. 94CobraPace

    Vert rear speakers

    Remove the lower & upper rear seats. Remove both door sils. There are a couple of plastic push pins inside the door jam & 1 in the top well & another behind the upper rear seat. Once those are out, the interior quarter panel can be removed. There will be 3 screws holding the speaker box in...
  18. 94CobraPace

    Rollbar: Weekend Progress PICS!!!

    Looks good, always liked your car. I need to save money & get me a roll bar for the vert Pace car for sure. Drive the car yet? Wondering if it stiffened the car up any.
  19. 94CobraPace

    searching around on ebay look what i found a radiator???

    It is a good looking radiator. Yes it looks like the Fluidyne, but how different can it be? Looks like a stock rad that is aluminum.
  20. 94CobraPace

    convertible top boot

    The boots are different from the SN95 to the new edge, but they are interchangeable, the SN95 boot will fit a new edge car.
Top Bottom
Back
Forums
Menu