Search results

  1. 03trubluGT

    Did You lose bottom end when u put a intake on???

    :stupid: Nowhere in the dyno sheet was there a loss in HP or TQ when going from stock to 70mm OR 75mm TB. Matt
  2. 03trubluGT

    Help on intake please....

    If they were restrictive, then I wouldn't be making the kind of power that I am, and I even have the snorkel on it. I just dropped in an Accel Kool Blue filter. Matt
  3. 03trubluGT

    off-road X or H pipe?

    The Offroad X, after my research, has proven to me to be the best choice, that's why I bought one. I lost no low end torque, and made good gains throughout, but you also have to remember I did my exhaust as a whole. I gained 23 RWHP when going from stock to what's in my sig. Matt
  4. 03trubluGT

    Installed a Intake and TB and i got problems!!!Please HELP????

    That's only a difference of 1.63 HP. Do you really think 1.63 HP will net you 2 tenths and 2 mph??? That's not realistic. If you can find someone who can "feel" the difference in 1.63 HP, then I have a pea you can hide under their mattress... Matt Oh, just make sure everything was...
  5. 03trubluGT

    Accufab plenum and 70 mmTB installed yesterday

    6 in one hand or 1/2 dozen in the other.. I don't think it makes much difference. I stayed with the 75mm after the testing becuase the car made more total HP with it on. I may go Vortech someday, and that was another reason to keep the 75mm TB. Matt
  6. 03trubluGT

    anyone Dyno'd a stock GT--Actual HP

    Mine did 232 rwhp 274 rwtq with just a drop in Accell air filter. Matt
  7. 03trubluGT

    How many miles you have?

    16 months old and 40k miles. Matt
  8. 03trubluGT

    O2 sensors and LT's

    If you aren't hard on the clutch, you don't need to replace it. It's just that you have (from what I've read, I haven't had to do it yet myself) to take the LTs off before you can to tranny work with BBKs. I've had my BBK LTs on for almost a year (next month is the anniversary) and my...
  9. 03trubluGT

    Accufab plenum and 70 mmTB installed yesterday

    I'm happy with mine... Matt
  10. 03trubluGT

    Plenum ? for a 2001 GT

    Look around this link, you will see some pics and ideas. You should be able to find the pic that goes with what you are looking for. Browse around. Matt http://www.modulardepot.com/?show=articlesdet&aid=38
  11. 03trubluGT

    blown GT--what should be my next mod--need advice

    Or, you should do a brake upgrade. Your brakes are currently way out-classed with the power you are running. Matt
  12. 03trubluGT

    blown GT--what should be my next mod--need advice

    I'm with this guy.. With all that power, you're gonna snap a 28 sp axle. Matt
  13. 03trubluGT

    Anyone with 3.73's wish they had gone w/ 4.10's ?

    Are those actual numbers you got while driving, or from a gear/speed calculator? I have noticed that the gear calculators are way off for me and I was looking for actual numbers. For example, it shows that with stock 3.27s, I should be at 67 mph at 2k rpm, but at 2k rpm, my speedo is dead...
  14. 03trubluGT

    Finally got my Stang dynoed..#'s seem a little low.

    I'm just not sold on the CAI, Optimizer, MAF, etc... I'm making great power with what little I've got invested. Matt
  15. 03trubluGT

    whistle on newly installed accufab tb?

    It's the vein in the Dragon plenum. Both Dragons I tested did the same thing. On the second test, I had 2 guys say "hey, you didn't tighten something"... I checked and everything was tight. I then leaned over the car and gave it some manual throttle, and you can tell that the whistling is...
  16. 03trubluGT

    Plenum Question:

    He said it LOOKED the best. It didn't PERFORM the best. I thought it was the best looking plenum in the test, but that's not getting HP. You might as well port your stock plenum for the amount of HP you are going to get out of your Trick Flow. Matt
  17. 03trubluGT

    What's Your Exhaust Set Up's

    I love mine! Matt
  18. 03trubluGT

    PLENUM RESULTS ARE IN!!!!!!!!!!!

    That's what Accufab was promoting all the time, but you know how everyone thinks "bigger is better" and wanted to "supersize" their throttle body.... So, Accufab started making the plenums to accept the 75mm TB... Consumer demand........ I think it will be VERY worth it. I tend to...
  19. 03trubluGT

    PLENUM RESULTS ARE IN!!!!!!!!!!!

    It ended up being around 11 miles for the day. I'm sure I didn't help the longevity of the car :( Matt
  20. 03trubluGT

    PLENUM RESULTS ARE IN!!!!!!!!!!!

    I don't have a paypal account, but if someone wants to send me any Kenne Bell SC parts, or Kenny Brown suspension upgrades, please do so! Matt
View older results
Top Bottom
Back
Forums
Menu