Search results

  1. C

    1966 Clutch/Brake Pedal Support Removal

    Kinda what I suspected (roller bearing mod) It's been a while, but I don't recall taking my steering wheel and column out to swap in the hanger, I guess it would help with clearance. I usually end up working harder to avoid a little work anyway...:rolleyes:
  2. C

    1966 Clutch/Brake Pedal Support Removal

  3. C

    1966 Clutch/Brake Pedal Support Removal

    The easiest way is to take the gage cluster out. Why don't you just swap the pedals? The support is the same.
  4. C

    Rear-end Question

    I have a '78, 8" axle I keep tripping over. I was going to try to use it in an early Mustang, but the bolt pattern is different.:(
  5. C

    Header leak

    I have a set of BBK equal length shorties on a 5.0 LX Coupe. I installed them with copper gaskets, but I still think they leak. It wasn't so bad with the off road H pipe as it drown it out. Now that I need a sticker I need to put the cats back in, it's so quiet now you can hear the leak:( After...
  6. C

    Updated photos, dialup users beware!

    Nice looking car. Good job:nice:
  7. C

    Stock 5.0 H pipe measurement please

    Well, I made a homemade flange and tried it, not quite sealed. It's still on the car. I want to make a better one at work (machine shop) and I didn't have time to take the pipe off again. I can always drop it tonight, but figured one of you guys probably had one kicking around. how about...
  8. C

    Stock 5.0 H pipe measurement please

    If you've got your catted pipe out and handy, can someone measure the diameter of the O.D. of the pipe where the flange bolts to the header just before the flare? Preferably with calipers. I'm trying to put mine back in for smog test and the PS side flange rusted away. I don't want to buy a...
  9. C

    Is this price right? Labor on rearend/gears install:

    Well, now I feel a little better. I dropped a 9" chunk off that was toasted and I'm paying 375 for new R+P, bearings, seals and setup
  10. C

    3 G Alternator Wiring question-Did search-no luck. What's a fuseable link????????????

    nuts... I just did this swap last weekend. Now it looks like I have revisit it to remove the black/orange wires :rolleyes: It does work quite well though, well worth the effort. BTW, I got my 4G wire from NAPA, they had a spool of it. I had to ask though, it was in the back. I had gotten my...
  11. C

    Need some advice?

    I've heard of fitment problems with new motor mounts. Some guys test fit them to the motor and brackets before trying to install the motor. A good source for "patch" metal is an old fender/door/hood that you're not going to use and that's got a good area to cut from.
  12. C

    2000 GT brakes on a 67

    Are those stock '67 spindles? I have a set of '02 calipers mounted to some Granada spindles. I tried to take pics (with my dual rate springs) but they came out crappy and blurry too, go figure :rlaugh:
  13. C

    How do I get 8" chunk to separate from rear end housing?

    Agreed, it's the copper washers. You'll never get it apart with them still there.
  14. C

    MA people

    Southwick. Vintage and Fox :D
  15. C

    THANK YOU!

    Sorta new here, lurk a lot. But I wish you all the best for a rapid recovery
  16. C

    Is it really THAT easy?

    I did a search on this and found some good info. I think I need a new clutch pack in the rear of my `91 5.0 Coupe. The axles have about 1/8" play in and out, although I would have SWORN it was 1/2" or better :( I measured it to be sure and then called a local guy who wants $250.00 + Is...
  17. C

    Help a 5.0 noob

    Well, that`s why I bought the `91 :D But now I can`t bear to cannibalize it :(
  18. C

    Help a 5.0 noob

    Looking at my computer I have a long range goal of installing a 5.0 EFI into a `66 Coupe :D I went to a swap meet and got an upper and lower intake with throttle body, fuel rails, injectors and heads off a `91 5.0 HO. I also found a complete(?) wiring harness from an `88 5.0, or so the...
  19. C

    Help a 5.0 noob

    computer loc. Thanks 88SC GT :banana:
  20. C

    Help a 5.0 noob

    I have a `91 5.0 LX Coupe. I know thjis is going to sound stupid but I was wondering what the computer looks like and where it`s located. :confused:
Top Bottom
Back
Forums
Menu