Search results

  1. stangman

    Boost-a-pump

    then i must have mis-understood when it was explained to me how it worked
  2. stangman

    Wiggle in the driveshaft

    i'd be willing to bet that's it. but i have been wrong before :)
  3. stangman

    3650 fluid swap (help needed)

    also, did you undo the fill plug on the outside of the tranny? if not, undo it & fill it that way until some fluid comes out of the hole. that's how you know it's full ;) & also, it might help fill it as well
  4. stangman

    Boost-a-pump

    yeah, 6 bolts & it's down if i remember correctly. 3 for the filler & 3 for the tank. it's not a hard job at all
  5. stangman

    Motor Free Spinning??

    how do you know that the pump is good? & also have you changed your filter?
  6. stangman

    Driving in 4th gear at 3,000 RPM at Highway Speeds

    well now you shouldn't fear the gear welcome to 80mph with 4.10s :)
  7. stangman

    Motor Free Spinning??

    my first thought would be look at your fuel sources
  8. stangman

    spider gears

    if anyone knows if the number would be stamped on them, i can go outside & read it off of one of my busted ones
  9. stangman

    Boost-a-pump

    it goes off voltage, not boost. a tuner may increase certain fuel values in a tune depending on where the car needs more fuel. but, the bap itself does not go off of boost & i have a Novi 2000 & i have no issues with mine at all
  10. stangman

    Wiggle in the driveshaft

    are you getting vibrations at certain speeds?
  11. stangman

    3650 fluid swap (help needed)

    so what is it doing? is it overflowing when you put too much down? or just slowly going in?
  12. stangman

    what is factory safe with a stock motor and vortech anybody

    it all depends on who tunes it
  13. stangman

    TR3650 transmission gear ratios

    that is correct
  14. stangman

    Rear end help.

    hammer.......& if that doesn't work................a bigger hammer :D
  15. stangman

    31 vs 28 spline, do I really need 31?

    you mean other than the fact that they're hardened, unlike the stockers
  16. stangman

    A few LT Questions

    no on all 4
  17. stangman

    31 vs 28 spline, do I really need 31?

    it got the under side of the splines also
  18. stangman

    You Wanted a Video...You Got a Video

    are all of those 1/8th traps? cause 90 is way high for an 1/8th trap, unless you have more mods than i've seen :shrug:
  19. stangman

    31 vs 28 spline, do I really need 31?

    that's exactly what i did, except i used moser axles & double packed the clutches. if i have to open it back up to put anything else on, like a differential cover, i'm taking it out & putting carbon fiber clutches in it. $100 for brand new mosers (friend discount) $50 for an explorer $20...
  20. stangman

    Anyone still here from back in the day?

    4 years = 15 interweb years :D
Top Bottom
Back
Forums
Menu