Search results

  1. 92rohcp

    DIY air to air intercooler on Kenne Bell for 92 LX

    For anyone who follows my progress here is a little update on my current winter projects and progress. I have moved on from the stock programming the EEC and dropped the MAF and have moved on to a stand alone tuning system based of the MegaSquirts which is manufactured by Bowling & Grippo. You...
  2. 92rohcp

    Expired Centerforce Dual friction clutch 26 spline and Billet steel flywheel

    I selling my clutch and flywheel setup that has only been slightly used 800 miles on the unit so it's already broken in and ready to go. The Centerforce dual friction is for 26 a spline part number CEN-DF161057. The Flywheels is a Billet steel SFI rated 6 bolt 157 tooth part number 163020...
  3. 92rohcp

    Fastest 5.0 (pushrod) Kenne Bell Mustang?

    I used Binary Editor with Quarter Horse to tune. It seems to me the KB system is different than other SC systems because it's always in vac in that area forward of the throttle body and even with the standard Flowzilla bypass setup the bypassed air is after the MAS air meter. You seem to think...
  4. 92rohcp

    Fastest 5.0 (pushrod) Kenne Bell Mustang?

    This has been a mind bender for some time and I can't quite talk myself into into if this will work and not create and unmetered air issue. The reason behind moving the bypass location would be to circulate from the cool side of the system staving off the KB heat monster. Look at the picture in...
  5. 92rohcp

    Fastest 5.0 (pushrod) Kenne Bell Mustang?

    Very nice work guys that is a huge increase in both T/B and I/C. Great work and I'm sure you will get more power. I'm still still working on my car almost done with the head regasket and this time I used the Fel Pro MLS SD4 severe duty gasket also I sold my large sheet metal end tanked Procharge...
  6. 92rohcp

    Fastest 5.0 (pushrod) Kenne Bell Mustang?

    Nice guys thanks for the response and can't wait to see your throttle body progress and pics.
  7. 92rohcp

    Fastest 5.0 (pushrod) Kenne Bell Mustang?

    LOL yes it does sing a strange song for sure here is a qoute from sig at the corral forums "The sound is unnatural and not of this world, like a screeching velociraptor with the flames of hell licking it's ass" Any chance you guys can remember if the 2.8L was harder to control the sound than...
  8. 92rohcp

    Fastest 5.0 (pushrod) Kenne Bell Mustang?

    Congrats on winning your class guys no doubt it took alot of hard work to get there with a KB and you've earned it. Thanks for the tips on the noise control and I have question if you guys remember when going from the 2.2 to the 2.8L if the moise issue was more of an issue. By the way I think...
  9. 92rohcp

    Fastest 5.0 (pushrod) Kenne Bell Mustang?

    Frustrating and at this point costing my summer to drive this car but it's just not happening. The new pipe welded on did nothing to dampen the load siren type noise at idle and at this point I'm thinking it could be a combination of things with the inlet. The large sheet metal inlet being...
  10. 92rohcp

    Fastest 5.0 (pushrod) Kenne Bell Mustang?

    :flag: Man you guys are crushing it. The PR KB crown is yours for sure and you have earned it. With your hard work and inovation you have gone where no man has gone before.
  11. 92rohcp

    DIY air to air intercooler on Kenne Bell for 92 LX

    Thanks man I will keep you guys informed and likewise with your project.
  12. 92rohcp

    DIY air to air intercooler on Kenne Bell for 92 LX

    I have more clearance now than with the Flowzilla not much more but a little bit.
  13. 92rohcp

    DIY air to air intercooler on Kenne Bell for 92 LX

    It's the 2.8 liter LC version H series designed for above 15 to 23 psi. Stay tuned for more A2A mania.
  14. 92rohcp

    DIY air to air intercooler on Kenne Bell for 92 LX

    Alright..... the beast fits under the hood! and the back inlet clears the hood by .5" and near that at the fire wall. Right know I'm working on the outlet transition into the fender it's a some complicated angles made more complicated by the 4" pipe. The bypass provision is now in a very compact...
  15. 92rohcp

    Fastest 5.0 (pushrod) Kenne Bell Mustang?

    Here is a current discussion the benefits of the J&S on the corral. http://forums.corral.net/forums/superchargers/1353519-j-s-safeguard.html
  16. 92rohcp

    Fastest 5.0 (pushrod) Kenne Bell Mustang?

    It sounds like you already have the fastest PR KB running and no doubt you will do better when your fueling and gearing is worked out. Ever thought of using the J&S Safeguard knock control to enable you to run max timing with safety. Some of us at the corral are starting to tap into this amazing...
  17. 92rohcp

    Kenne Bell A2A intercooler kit for Fox body and sn95

    Hi glad your interested in the KB A2A concept unfortunately the pipe lit above has been sold, but it can be done again I'll try and give you a call later and we can chat about your project.
  18. 92rohcp

    Fastest 5.0 (pushrod) Kenne Bell Mustang?

    Sneak peak of the massive setup going on my 2.8L, Trick Flow R lower and the split and rewelded KB with 4" pipe. New huge rear inlet 3x8" back box to 5" with 105mm T'B going on.
  19. 92rohcp

    Fastest 5.0 (pushrod) Kenne Bell Mustang?

    So I looked back again and found where you guys saud your feeding the KB LC ports from the engine coolant. I have a couple questions. 1. Is there a specific inlet outlet on the KB or can either be used? 2. On the water pump there is to ports for water passage which on is the inlet and outlet? 3...
  20. 92rohcp

    Fastest 5.0 (pushrod) Kenne Bell Mustang?

    This is an older post and I forgot to ask what power level are you at with your fuel setup routed this way, this is not the KB race car in this thread is it.
Top Bottom
Back
Forums
Menu