Search results

  1. KENS89LX

    Fuel Pressure A Adjustment Without Gauge

    I'll check the muffler bearing also!!
  2. KENS89LX

    Fuel Pressure A Adjustment Without Gauge

    well i did recently put a new tpi on it , and i just recently got a multimeter from harbor freight (it was free) what setting do i use ...dcv..acv..1.5v/9v..dca..any help would be appreciated
  3. KENS89LX

    Fuel Pressure A Adjustment Without Gauge

    huh...i put a new tps a few months ago i will check that first to see if it is in range, of couse i got the multimeter from harbor freight..it was free what setting do i use dcv,acv,dca, or one slot has 1.5v/9v..
  4. KENS89LX

    Fuel Pressure A Adjustment Without Gauge

    I need to adjust my fuel pressure but don't have a gauge. When engine is warmed up and I shut it off it will just turn over until I hit the gas pedal then it starts. To me that is too much fuel so which way do I need to turn to lessen the pressure ...in or out.
  5. KENS89LX

    2015 Mustang

    What do you all think about the 2015 stang?
  6. KENS89LX

    Low Rpm Lean Pop Trouble

    Vacuum leaks will do that. had similar issue, found a leak in one of the lines near firewall.
  7. KENS89LX

    Please Help Me Identify This Knocking Noise!

    Notorious 4.6 issue...cam phasers..
  8. KENS89LX

    Engine New Heater Core, Now Overheating!!

    Wouldn't a cracked head cause this?
  9. KENS89LX

    Engine How To Plug Hole On Intake...

    WOW!!! should have thought that question through a little more...and thanks for the info 7991LXnSHO
  10. KENS89LX

    Engine How To Plug Hole On Intake...

    Hey guys I broke a metal vacuum line on my GT)40 p intake. It broke at intake what can I use to fill the ho
  11. KENS89LX

    I Think I Blew My Engine

    Vacuum leak?!
  12. KENS89LX

    Delayed Start

    I know when I had fuel pressure adjusted to high it would have the same symptoms you have. If you hold the throttle while cranking it started sooner.
  13. KENS89LX

    Gt-40p Intake Swap

    found another issue, when i move the white salt shaker, the engine either speeds up or cuts out, i know you can clean them just need to know the steps and with what. the wires are not frayed or nothing so n ot sure what the issue is
  14. KENS89LX

    Gt-40p Intake Swap

    After my last post I slacked on the investigation since I have no gauges (fuel pressure, vacuum). Today I was moving the salt/pepper connectors to adjust the fuel pressure because I knew it wasn't right it was hard to get started when engine was warm ..anyway the engine changed RpMs and after...
  15. KENS89LX

    Still Running Hot

    Yea i agree with mikestang 63 Sounds like a head gasket or cracked head to me...could be how your hose blew apart and getting air in system
  16. KENS89LX

    300.000 Mile Marker

    264,000 here, few mods, stock bottom end.
  17. KENS89LX

    Gt-40p Intake Swap

    94,44 for catalytic converters...do not have, so 33 egr not opening is that right why when i unplugged it it was no change in problem maybe the rubber in the egr is leaking but then i tried another one and it ran worse so now what ..
  18. KENS89LX

    Gt-40p Intake Swap

    ok codes....94, 33, 44
  19. KENS89LX

    Gt-40p Intake Swap

    So would the coil be cutting out, anyone have problems with them
  20. KENS89LX

    Gt-40p Intake Swap

    Yes. Ford motorsport
Top Bottom
Back
Forums
Menu