Search results

  1. M

    AODE leak, anyone think this is possible?

    Go to the Ford dealer and get the gasket. If you cant find one, silicone...............
  2. M

    What Ignition Coil's you guys runing "and Vote here"

    Nothing wrong with the stock coil. Just paint it red. The red makes it work like an MSD. HMMMM
  3. M

    i need this emblem

    You are correct. Someone knows their cars. In the 80's Chrysler used the turbo a lot. The 2.2 was the engine of choice. Shelby Daytonas were awesome cars for the Chrysler line. Check out some web pages dedicated to that line, and you should find your decal.
  4. M

    Key hot fuse to hardwire radar detector to?

    If I remember right, I just drilled a small hole in the clock housing and used a wire that went to it. There is one somewhere on that harness.
  5. M

    Problem vibration after u-joints replaced......please help

    You know I have never once had a problem putting back a driveshaft in without the correct lineup. I have forgot and still never had a problem. You may have a bent shaft.
  6. M

    new EGR delete tip!

    Guys I have a quick fox for your problem. This fix will allow you to remove the EGR completly with no left over parts under your hood. I cant do this test since I am working out of state at the time or I would show you the right method. You need to get a voltage meter/tester that has an OHM...
  7. M

    Just to let everyone know...

    The 99 and up seats wire harness is not the same. The seat tracks will work from the 99 and up in a 95.
  8. M

    Just got a call from Ford.....

    Isnt the PCM out on the radiator? If so I have one you can have for the shipping only. I am in a giving mood tonight. You pay the shipping and only when you receive the package. It is the black box that hangs on the bracket on the side of the radiator above the ABS system. I may be wrong but I...
  9. M

    Clunk coming from driver's side front end

    You can just replace one. Usually they are a little more than $20.00 a piece. The outer ones are usually the culprit. You should be able to get a free exam at most stores and then they will do the labor, which is like a 5 min. job to remove them, and then align. They attach to the steering...
  10. M

    Clunk coming from driver's side front end

    Not unless you take it to the alignment shop.
  11. M

    Clunk coming from driver's side front end

    Tie-rod ends. You say it happens during low speed turns. You will need an alignment after replacment.
  12. M

    Had engine fire today.

    I purchased a glass see through filter for a Ford truck I had. The filter was wire tied to a couple of hoses. The hoses were just loose enough to bounce the filter against the valve cover and broke the glass. The heat from the headers was all it took to flash the gas. I had lots of melted wires...
  13. M

    95' Cobra Electrical problem. plz help.

    You have to check the grounds up by the upper radiator support. Remove those little green screws and scrape away all the garbage. I even added new ring terminals. TRUST ME ON THIS!
  14. M

    Stereo/speaker help...

    You do not have to have a crossover to run these. You can simply wire the + to both of the + post and same for the -.
  15. M

    5.0 fender emblems on 94/95

    You can take some fishing line and run it behind the emblem in a sawing motion which will cut down through the sticker. You can also choose to keep those on there because there is a hole in behind it. I placed mine on the fender above the factor ones.
  16. M

    Is this possible???

    Perhaps they used stock sized pistons in a 30 or even 60 over cylinder block.
  17. M

    Got my car fixed! Pics inside

    I feel your pain on the questioning of keeping or selling a salvaged SN95. I ended up buying back for ONLY 5% of the estimated value of the car. The car was worth $7000 according to the adjuster. For $350.00 I not only got my old car back but my loan paid off and still pocketed $2100 in cash. I...
  18. M

    Chrome Alternator Fried

    Juice? Since we have mentioned Florida a few times I assume your talkin the Orange kind? YUMMY!
  19. M

    Rear Swap

    Well no ordering is needed, I already have one from the salvage 95 that I have. Need any parts? AODE, Cobra RR 94-98 hood, 99 Mustang LX Hood, ping me.
  20. M

    Rear Swap

    Will the 8.8 from my 95 GT go in OK ona 99 V6 7.5 swap? I have heard that the width is different on the 7.5 and it was longer. I heard 1.5 in" longer on both sides. Am I wrong?
View older results
Top Bottom
Back
Forums
Menu