Search results

  1. RMODEL65

    if your drive a 5.0 ( which should be everyone)

    i got a 3.85 im 23 my insurance is 67 a month for a 87gt
  2. RMODEL65

    is it HOT where you guys are?

    got a bad vaccum hose that runs from right hand fire wall near the ac dryer (connects under the dash)and runs across the fire wall to the vaccum port near the master cylinder. it provides the suction to open the blend door in the ac case!! it might just be unplugged unsder the dash or in the...
  3. RMODEL65

    ARE GTP'S WORTH SPENDING MONEY ON

    http://www.thumperoforangepark.com/ this guy does e7 and gt40 etc! check out what he does with the stock e7s imagine what he can do with the 40's
  4. RMODEL65

    Cars you've owned?

    wow ive had 26 mustangs i beileve? since i turned 15 im now 23 i had 13 car last year at christmas plus other cars 79 pontiac grand prix 79 gran prix 78 mg midget 76 mg midget 65 ford mustang 72 ford mustang fastback 72 mustang sports coupe 73 mustang coupe 72 mustang coupe 73 mustang...
  5. RMODEL65

    Have GAS Prices curbed your driving?

    nope i get 28 mpg caus eim still stock:)
  6. RMODEL65

    kandy painted fox

    got some cobra r's for 500 bucks with 2 new front tire and some slightly used drag radials the front are 17x8 and the rears are 17x9
  7. RMODEL65

    candy paint 101

    i definitely laid it on in the final coat
  8. RMODEL65

    candy paint 101

    thats why u do a final clear coat with out the kandy koncentrate
  9. RMODEL65

    candy paint 101

    the thing with kandy paint is exclusivity. it take alot of paint labor to do one and materials. i did one on my vert it took from about 7pm-2am in the morning to finish. the results are unusal. the foundation for any paint job is extremely important! the problem with kandy paint are they are...
  10. RMODEL65

    C&L 76mm Mass Air

    stock mass air meter is a big restriction it was 55mm
  11. RMODEL65

    trim paint

    sem brand also
  12. RMODEL65

    kandy painted fox

    i do autobody work for a living at the house and at my dayu job although i dont paint to much there unless its an insurance job my boss usually does all the overalls
  13. RMODEL65

    Spent the day at the junkyard

    im in ga ill come get if from u
  14. RMODEL65

    kandy painted fox

    i had one but i sold it a while back my grandmother lives in millen i go that ways sometimes maybe in afew weeks or so i dont know? u can come down and hang out and go to the beach if u want. as for the compressor question from the other guy a 2 stage compressor is good with about an 80 gallon...
  15. RMODEL65

    kandy painted fox

    i just got finished spraying the vert lat night came out pretty good firts time ever spraying a kandy. it meteror maroon with red and white ice pearls with apple red kandy overtop of it. and i highlighted the main body lines to give it that pop on them
  16. RMODEL65

    Bolt down rockers on Twisted Wedge heads?

    what kinda noise arent u running rollers with those heads? they should be pretty quite
  17. RMODEL65

    94 t-5 in a 93 mustang

    need to get a 93 and earlier input shaft to change out the 94-95 t-5 is about an inch longer if u didnt change the input shaft and used the 94-95 bell it would move the tranny back causing probs
  18. RMODEL65

    Hatch striker bushing?

    yeah just put the cut side down so it doesnt get pushed off by the latch
  19. RMODEL65

    Primer Question

    make sure if priming over bare metal to use an acid etch primer then a sandable primer! and for the por15 ? its about 2 weeks
  20. RMODEL65

    Hatch striker bushing?

    i just cut the bushing down the center and open it up and slide them on the bushings arent usually tall enough so i take another one and cut it in half so it keeps the big one from moving around!
Top Bottom
Back
Forums
Menu